[PATCH v2 22/25] dt-bindings: msm/dsi: Remove unused properties

[Archit Taneja]

Hi Rob,

On 06/23/2016 07:43 PM, Archit Taneja wrote:
> Remove the DSI index properties from the DSI host and PHY binding
> documentation. The indices aren't a valid property and shouldn't
> be a part of the DT binding.
>

Can I get an Ack on this?

Thanks,
Archit

> Signed-off-by: Archit Taneja <architt at codeaurora.org>
> ---
>   Documentation/devicetree/bindings/display/msm/dsi.txt | 6 ------
>   1 file changed, 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> index 6b1cab1..e6933a8 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
> @@ -7,8 +7,6 @@ Required properties:
>   - reg: Physical base address and length of the registers of controller
>   - reg-names: The names of register regions. The following regions are required:
>     * "dsi_ctrl"
> -- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
> -  be 0 or 1, since we have 2 DSI controllers at most for now.
>   - interrupts: The interrupt signal from the DSI block.
>   - power-domains: Should be <&mmcc MDSS_GDSC>.
>   - clocks: Phandles to device clocks.
> @@ -96,8 +94,6 @@ Required properties:
>     * "dsi_phy_regulator"
>   - clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
>     2 clocks: A byte clock (index 0), and a pixel clock (index 1).
> -- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
> -  be 0 or 1, since we have 2 DSI PHYs at most for now.
>   - power-domains: Should be <&mmcc MDSS_GDSC>.
>   - clocks: Phandles to device clocks. See [1] for details on clock bindings.
>   - clock-names: the following clocks are required:
> @@ -116,7 +112,6 @@ Optional properties:
>   Example:
>   	dsi0: dsi at fd922800 {
>   		compatible = "qcom,mdss-dsi-ctrl";
> -		qcom,dsi-host-index = <0>;
>   		interrupt-parent = <&mdp>;
>   		interrupts = <4 0>;
>   		reg-names = "dsi_ctrl";
> @@ -199,7 +194,6 @@ Example:
>
>   	dsi_phy0: dsi-phy at fd922a00 {
>   		compatible = "qcom,dsi-phy-28nm-hpm";
> -		qcom,dsi-phy-index = <0>;
>   		reg-names =
>   			"dsi_pll",
>   			"dsi_phy",
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project