[PATCH 20/22] arm64: dts: r8a7795: Add HDMI encoder support

[Laurent Pinchart]

From: Ulrich Hecht <ulrich.hecht+renesas at gmail.com>

Add DT nodes for the two HDMI encoders in disabled state.

Based on work by Koji Matsuoka.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas at gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 50 ++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 9b717dee1f7b..eceb62ee88df 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1590,11 +1590,13 @@
 				port at 1 {
 					reg = <1>;
 					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
 					};
 				};
 				port at 2 {
 					reg = <2>;
 					du_out_hdmi1: endpoint {
+						remote-endpoint = <&dw_hdmi1_in>;
 					};
 				};
 				port at 3 {
@@ -1604,5 +1606,53 @@
 				};
 			};
 		};
+
+		hdmi0: hdmi0 at fead0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port at 0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port at 1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi1: hdmi1 at feae0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfeae0000 0 0x10000>;
+			interrupts = <0 436 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 728>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port at 0 {
+					reg = <0>;
+					dw_hdmi1_in: endpoint {
+						remote-endpoint = <&du_out_hdmi1>;
+					};
+				};
+				port at 1 {
+					reg = <1>;
+				};
+			};
+		};
 	};
 };
-- 
Regards,

Laurent Pinchart