[PATCHv2 2/2] drm/omap: fix primary-plane's possible_crtcs

Laurent Pinchart laurent.pinchart at ideasonboard.com
Fri Dec 2 14:16:23 UTC 2016


Hi Tomi,

Thank you for the patch.

On Friday 02 Dec 2016 16:07:11 Tomi Valkeinen wrote:
> We set the possible_crtc for all planes to "(1 << priv->num_crtcs) - 1",
> which is fine as the HW planes can be used fro all crtcs. However, when
> we're doing that, we are still incrementing 'num_crtcs', and we'll end
> up with bad possible_crtcs, preventing the use of the primary planes.
> 
> This patch passes a possible_crtcs mask to plane init function so that
> we get correct possible_crtc.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> ---
> 
> v2: use correct possible_crtcs value
> 
>  drivers/gpu/drm/omapdrm/omap_drv.c   | 17 ++++++++++++-----
>  drivers/gpu/drm/omapdrm/omap_drv.h   |  3 ++-
>  drivers/gpu/drm/omapdrm/omap_plane.c |  6 +++---
>  3 files changed, 17 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
> b/drivers/gpu/drm/omapdrm/omap_drv.c index 39c5312b466c..fdc83cbcde61
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -267,13 +267,15 @@ static int omap_connect_dssdevs(void)
>  }
> 
>  static int omap_modeset_create_crtc(struct drm_device *dev, int id,
> -				    enum omap_channel channel)
> +				    enum omap_channel channel,
> +				    u32 possible_crtcs)
>  {
>  	struct omap_drm_private *priv = dev->dev_private;
>  	struct drm_plane *plane;
>  	struct drm_crtc *crtc;
> 
> -	plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_PRIMARY);
> +	plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_PRIMARY,
> +		possible_crtcs);
>  	if (IS_ERR(plane))
>  		return PTR_ERR(plane);

If you removed the priv->num_crtcs++ a bit below in this function...

> @@ -309,6 +311,7 @@ static int omap_modeset_init(struct drm_device *dev)
>  	int num_crtcs;
>  	int i, id = 0;
>  	int ret;
> +	u32 possible_crtcs;
> 
>  	drm_mode_config_init(dev);
> 
> @@ -325,6 +328,7 @@ static int omap_modeset_init(struct drm_device *dev)
>  	 * We use the num_crtc argument to limit the number of crtcs we 
create.
>  	 */
>  	num_crtcs = min3(num_crtc, num_mgrs, num_ovls);

and assigned priv->num_crtcs here and replaced the channel_used() function 
with a simple bitmask private to omap_modeset_init() you would end up with a 
much simpler implementation that wouldn't require passing possible_crtcs 
through a bunch of functions.

> +	possible_crtcs = (1 << num_crtcs) - 1;
> 
>  	dssdev = NULL;
> 
> @@ -388,7 +392,8 @@ static int omap_modeset_init(struct drm_device *dev)
>  		 * allocated crtc, we create a new crtc for it
>  		 */
>  		if (!channel_used(dev, channel)) {
> -			ret = omap_modeset_create_crtc(dev, id, channel);
> +			ret = omap_modeset_create_crtc(dev, id, channel,
> +				possible_crtcs);
>  			if (ret < 0) {
>  				dev_err(dev->dev,
>  					"could not create CRTC (channel 
%u)\n",
> @@ -418,7 +423,8 @@ static int omap_modeset_init(struct drm_device *dev)
>  			return -ENOMEM;
>  		}
> 
> -		ret = omap_modeset_create_crtc(dev, id, i);
> +		ret = omap_modeset_create_crtc(dev, id, i,
> +			possible_crtcs);
>  		if (ret < 0) {
>  			dev_err(dev->dev,
>  				"could not create CRTC (channel %u)\n", i);
> @@ -432,7 +438,8 @@ static int omap_modeset_init(struct drm_device *dev)
>  	for (; id < num_ovls; id++) {
>  		struct drm_plane *plane;
> 
> -		plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_OVERLAY);
> +		plane = omap_plane_init(dev, id, DRM_PLANE_TYPE_OVERLAY,
> +			possible_crtcs);
>  		if (IS_ERR(plane))
>  			return PTR_ERR(plane);
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h
> b/drivers/gpu/drm/omapdrm/omap_drv.h index 4c51135eb9a6..7d9dd5400cef
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -157,7 +157,8 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
>  int omap_crtc_wait_pending(struct drm_crtc *crtc);
> 
>  struct drm_plane *omap_plane_init(struct drm_device *dev,
> -		int id, enum drm_plane_type type);
> +		int id, enum drm_plane_type type,
> +		u32 possible_crtcs);
>  void omap_plane_install_properties(struct drm_plane *plane,
>  		struct drm_mode_object *obj);
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c
> b/drivers/gpu/drm/omapdrm/omap_plane.c index 9c43cb481e62..82b2c23d6769
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
> @@ -356,9 +356,9 @@ static const uint32_t error_irqs[] = {
> 
>  /* initialize plane */
>  struct drm_plane *omap_plane_init(struct drm_device *dev,
> -		int id, enum drm_plane_type type)
> +		int id, enum drm_plane_type type,
> +		u32 possible_crtcs)
>  {
> -	struct omap_drm_private *priv = dev->dev_private;
>  	struct drm_plane *plane;
>  	struct omap_plane *omap_plane;
>  	int ret;
> @@ -381,7 +381,7 @@ struct drm_plane *omap_plane_init(struct drm_device
> *dev, omap_plane->error_irq.irq = omap_plane_error_irq;
>  	omap_irq_register(dev, &omap_plane->error_irq);
> 
> -	ret = drm_universal_plane_init(dev, plane, (1 << priv->num_crtcs) - 1,
> +	ret = drm_universal_plane_init(dev, plane, possible_crtcs,
>  				       &omap_plane_funcs, omap_plane->formats,
>  				       omap_plane->nformats, type, NULL);
>  	if (ret < 0)

-- 
Regards,

Laurent Pinchart



More information about the dri-devel mailing list