[PATCH 13/22] drm: bridge: dw-hdmi: Replace device type with platform quirks
Russell King - ARM Linux
linux at armlinux.org.uk
Fri Dec 2 14:24:01 UTC 2016
On Fri, Dec 02, 2016 at 01:43:28AM +0200, Laurent Pinchart wrote:
> From: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
>
> The dw-hdmi driver declares a dev_type to distinguish platform specific
> changes. Replace this with a quirk field, so that the platform can
> specify the required quirks for the driver, rather than the driver
> becoming conditional on multiple platforms.
>
> As part of this, we rename the dw-hdmi 'spare' which is defined as the
> SVSRET bit in later documentation.
I'd really prefer that we did not go down the broken route of adding
a set of "quirk" flags - look at what a mess SDHCI has become through
allowing that kind of practice.
I'd much rather we find a saner structure to this - and we know that
the hardware has ID registers in it which can be used (so far) to
identify the buggy hardware.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> ---
> drivers/gpu/drm/bridge/dw-hdmi.c | 14 ++++++--------
> drivers/gpu/drm/bridge/dw-hdmi.h | 4 ++--
> drivers/gpu/drm/imx/dw_hdmi-imx.c | 3 +--
> drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 +-
> include/drm/bridge/dw_hdmi.h | 12 +++++-------
> 5 files changed, 15 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
> index 06a44a2cdf3b..26607185722f 100644
> --- a/drivers/gpu/drm/bridge/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/dw-hdmi.c
> @@ -118,7 +118,6 @@ struct dw_hdmi {
> struct drm_bridge bridge;
>
> struct platform_device *audio;
> - enum dw_hdmi_devtype dev_type;
> struct device *dev;
> struct clk *isfr_clk;
> struct clk *iahb_clk;
> @@ -896,11 +895,11 @@ static void dw_hdmi_phy_enable_tmds(struct dw_hdmi *hdmi, u8 enable)
> HDMI_PHY_CONF0_ENTMDS_MASK);
> }
>
> -static void dw_hdmi_phy_enable_spare(struct dw_hdmi *hdmi, u8 enable)
> +static void dw_hdmi_phy_enable_svsret(struct dw_hdmi *hdmi, u8 enable)
> {
> hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
> - HDMI_PHY_CONF0_SPARECTRL_OFFSET,
> - HDMI_PHY_CONF0_SPARECTRL_MASK);
> + HDMI_PHY_CONF0_SVSRET_OFFSET,
> + HDMI_PHY_CONF0_SVSRET_MASK);
> }
>
> static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> @@ -1031,8 +1030,8 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi,
> dw_hdmi_phy_gen2_txpwron(hdmi, 1);
> dw_hdmi_phy_gen2_pddq(hdmi, 0);
>
> - if (hdmi->dev_type == RK3288_HDMI)
> - dw_hdmi_phy_enable_spare(hdmi, 1);
> + if (pdata->quirks & DW_HDMI_QUIRK_PHY_SVSRET)
> + dw_hdmi_phy_enable_svsret(hdmi, 1);
If we get a proper split between the encoder and the PHY, this should be
dealt with at the PHY side of the driver.
>
> /*Wait for PHY PLL lock */
> msec = 5;
> @@ -1348,7 +1347,7 @@ static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)
> hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, HDMI_MC_SWRSTZ);
>
> val = hdmi_readb(hdmi, HDMI_FC_INVIDCONF);
> - if (hdmi->dev_type == IMX6DL_HDMI) {
> + if (hdmi->plat_data->quirks & DW_HDMI_QUIRK_FC_INVIDCONF) {
> hdmi_writeb(hdmi, val, HDMI_FC_INVIDCONF);
> return;
> }
This is a bug found on iMX6DL versions of the IP - I don't have a 6DL
board powered up at the moment to grab its revision information, but
it would be nice to make that conditional on the revision. From what
I gather, it's a workaround issued by Synopsis rather than specific
to the (ex)FSL implementation.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
More information about the dri-devel
mailing list