[PATCH 13/22] drm: bridge: dw-hdmi: Replace device type with platform quirks

Mon Dec 5 12:44:31 UTC 2016

Hi Jose,

On Monday 05 Dec 2016 12:31:30 Jose Abreu wrote:
> On 05-12-2016 11:32, Laurent Pinchart wrote:
> > On Monday 05 Dec 2016 10:50:19 Jose Abreu wrote:
> >> On 02-12-2016 15:43, Laurent Pinchart wrote:
> >>> On Friday 02 Dec 2016 14:24:01 Russell King - ARM Linux wrote:
> >>>> On Fri, Dec 02, 2016 at 01:43:28AM +0200, Laurent Pinchart wrote:
> >>>>> From: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> >>>>> 
> >>>>> The dw-hdmi driver declares a dev_type to distinguish platform
> >>>>> specific changes. Replace this with a quirk field, so that the
> >>>>> platform can specify the required quirks for the driver, rather than
> >>>>> the driver becoming conditional on multiple platforms.
> >>>>> 
> >>>>> As part of this, we rename the dw-hdmi 'spare' which is defined as the
> >>>>> SVSRET bit in later documentation.
> >>>> 
> >>>> I'd really prefer that we did not go down the broken route of adding
> >>>> a set of "quirk" flags - look at what a mess SDHCI has become through
> >>>> allowing that kind of practice.
> >>>> 
> >>>> I'd much rather we find a saner structure to this - and we know that
> >>>> the hardware has ID registers in it which can be used (so far) to
> >>>> identify the buggy hardware.
> >>> 
> >>> I'd much prefer something that would allow runtime identification of the
> >>> device and the corresponding actions to be taken. However, the amount of
> >>> documentation we have on the DWC HDMI TX IP core (and the associated
> >>> PHY) is pretty limited, given that Synopsys doesn't make the
> >>> documentation available publicly. Changes made to the IP core by
> >>> integrators could complicate this further. I'm trying to gather as much
> >>> information as possible to make clean the code up, for instance by
> >>> trying to identify the PHYs used on the various platforms we support.
> >>> Progress is slow on that front, there isn't enough leaked information
> >>> available online :-) I haven't given up though, but I'll need more time.
> >>> 
> >>> I don't like quirks much either. They are however already used today,
> >>> even if we trigger them through dev_type instead of quirk flags. This
> >>> patch came from a previous version found in a BSP that simply sprinkled
> >>> several if (hdmi-> dev_type == RCAR_HDMI) through the code. For
> >>> instance,
> >>> 
> >>> -	if (hdmi->dev_type == RK3288_HDMI)
> >>> +	if (hdmi->dev_type == RK3288_HDMI || hdmi->dev_type == RCAR_HDMI)
> >>> 		dw_hdmi_phy_enable_spare(hdmi, 1);
> >>> 
> >>> which I think is worse than flags as it would quickly degenerate to
> >>> spaghetti code.
> >>> 
> >>> For this specific case, we've managed to identify that on Renesas
> >>> platforms the bit set by this function is called SVSRET. Its usage isn't
> >>> clear yet, but I suspect it to control one of the PHY input control
> >>> signals, like the other bits in the same register. I'm trying to get
> >>> more information to clean the implementation further, hopefully with a
> >>> way to determine whether the signal is used based on PHY identification.
> >> 
> >> SVSRET is a low power mode consumption and is a PHY input signal
> >> as you suggested.
> > 
> > Thank you for the confirmation. Would you happen to know what SVSRET
> > stands for ?
> 
> Have no info about that. Sorry.
> 
> >> Most of the configurable input signals of the PHY are available by the
> >> controller regbank. I don't think it is possible to detect this at
> >> runtime, I think you have at least to hardcode which version of the PHY
> >> you are using.
> >> 
> >> I would suggest that maybe all the PHY logic should be extracted and then
> >> use callbacks to glue controller and phy. Then, depending on the PHY you
> >> could use empty stubs if, for example, a given PHY did not support
> >> SVSRET. Still, I don't know if this is the best option. What I do know is
> >> that there are a large number of PHY's with different flavors that can
> >> use the same controller. The controller has different versions also, and
> >> each version can have quirks but I think it would be easier to manage
> >> this driver if we had a clear distinction between PHY and controller.
> > 
> > Agreed, I'd like to go in that direction. What makes it quite difficult is
> > the lack of documentation about the PHYs :-) I've found six different PHY
> > types that can be identified by the CONFIG2_ID register:
> > 
> > Bits    | Field         	| Description
> > --------------------------------------------------------------------------
> > 7-0     | phytype       	| PHY interface
> >         |               	| 0x00: Legacy PHY (HDMI TX PHY)
> >         |               	| 0xb2: MHL PHY + HEAC PHY
> >         |               	| 0xc2: MHL PHY
> >         |               	| 0xe2: HDMI 3D TX PHY + HEAC PHY
> >         |               	| 0xf2: HDMI 3D TX PHY
> >         |               	| 0xf3: HDMI2 TX PHY
> > 
> > I'm sure there's more than that. In particular I wonder how external
> > vendor PHYs are identified.
> 
> 0xFE.

Thank you. That's the value reported by Allwinner platforms, which expose 
their PHY control registers through APB instead of the internal I2C bus. It 
all starts making sense :-)

> > I'm also wondering whether there's a need to keep support for the legacy
> > PHY signals (ENTMDS and PDZ in the PHY_CONF0 register). As far as I
> > understand they're not used by the Gen2 PHYs (including the external
> > vendor PHYs), but I can't confirm that without more documentation
> > (although I could test that on the platforms I have access to).
> 
> You are correct. Not available on Gen2 and on external phys.

Thank you.

> >>> This is all work in progress, and if anyone has access to any
> >>> documentation and can provide additional information I'll be grateful.
> >>> 
> >>>>> Signed-off-by: Kieran Bingham
> >>>>> <kieran.bingham+renesas at ideasonboard.com>
> >>>>> Signed-off-by: Laurent Pinchart
> >>>>> <laurent.pinchart+renesas at ideasonboard.com>
> >>>>> ---
> >>>>> 
> >>>>>  drivers/gpu/drm/bridge/dw-hdmi.c            | 14 ++++++--------
> >>>>>  drivers/gpu/drm/bridge/dw-hdmi.h            |  4 ++--
> >>>>>  drivers/gpu/drm/imx/dw_hdmi-imx.c           |  3 +--
> >>>>>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c |  2 +-
> >>>>>  include/drm/bridge/dw_hdmi.h                | 12 +++++-------
> >>>>>  5 files changed, 15 insertions(+), 20 deletions(-)

-- 
Regards,

Laurent Pinchart