[PATCH v2 3/3] drm/edid: Implement SCDC Read Request capability detection

[Jose Abreu]

Hi Thierry,


On 05-12-2016 11:14, Thierry Reding wrote:
> On Mon, Dec 05, 2016 at 11:06:15AM +0000, Jose Abreu wrote:
>> Hi Thierry,
>>
>>
>> Do you think while you are at it you could implement a
>> set_scrambling() callback? It should be pretty straight forward:
>> you read the SCDC_TMDS_CONFIG reg, do a mask, and then write it
>> again.
>>
>>
>> I think this is an important feature that we should have.
> Yeah, agreed. I was actually thinking about going one step further and
> provide more of the polling functionality as a helper. Even if we have
> accessors that wrap the low-level functionality, most drivers would
> still have to provide their own delayed workqueue to deal with sinks
> (or sources) that don't support read requests. Having this in standard
> helpers would help reduce the boilerplate a lot further.
>
> Does your hardware by any chance support read requests on SCDC? It'd be
> interesting to see how that works in practice. Unfortunately Tegra does
> not seem to support it.
>
> Thierry

Yes, my HW supports it though I don't have the setup here to test
right now (but it was used before). In our controller it is
pretty straight forward:
    1) Enable interrupt for rr indication [source]
    2) Enable update read on a rr [source]
    3) Set rr flag in the sink [sink]

Point 2) makes it clear: Whenever we get a rr then the source
will automatically read the sink and dump the contents read in
the regbank. Then the SW gets an interrupt and it should read the
contents of the registers.

>
>> On 02-12-2016 19:24, Thierry Reding wrote:
>>> From: Thierry Reding <treding at nvidia.com>
>>>
>>> Sinks that support SCDC can optionally have the capability to initiate
>>> read requests, which are a mechanism by which a sink can notify its
>>> source that it should read the Update Flags. If either the sink or the
>>> source are not Read Request capable, polling of the Update Flags shall
>>> be employed.
>>>
>>> Signed-off-by: Thierry Reding <treding at nvidia.com>
>>> ---
>>> Changes in v2:
>>> - new patch
>>>
>>>  drivers/gpu/drm/drm_edid.c | 36 ++++++++++++++++++++++++++++++++++++
>>>  include/drm/drm_edid.h     |  1 +
>>>  2 files changed, 37 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
>>> index 369961597ee5..8211cce3e09e 100644
>>> --- a/drivers/gpu/drm/drm_edid.c
>>> +++ b/drivers/gpu/drm/drm_edid.c
>>> @@ -3736,6 +3736,42 @@ bool drm_detect_hdmi_scdc(struct edid *edid)
>>>  EXPORT_SYMBOL(drm_detect_hdmi_scdc);
>>>  
>>>  /**
>>> + * drm_detect_hdmi_scdc_rr_capable - detect whether an HDMI sink is capable of
>>> + *    initiating an SCDC Read Request
>>> + * @edid: sink EDID information
>>> + *
>>> + * Parse the CEA extension according to CEA-861-B to find an HF-VSDB as
>>> + * defined in HDMI 2.0, section 10.3.2 "HDMI Forum Vendor Specific Data
>>> + * Block" and checks if the RR_Capable bit (bit 6 of byte 6) is set.
>>> + *
>>> + * Returns:
>>> + * True if the sink is capable of initiating an SCDC Read Request, false
>>> + * otherwise.
>>> + */
>>> +bool drm_detect_hdmi_scdc_rr_capable(struct edid *edid)
>>> +{
>>> +	unsigned int start, end, i;
>>> +	const u8 *cea;
>>> +
>>> +	cea = drm_find_cea_extension(edid);
>>> +	if (!cea)
>>> +		return false;
>>> +
>>> +	if (cea_db_offsets(cea, &start, &end))
>>> +		return false;
>>> +
>>> +	for_each_cea_db(cea, i, start, end) {
>>> +		if (cea_db_is_hdmi_forum_vsdb(&cea[i])) {
>>> +			if (cea[i + 6] & 0x40)
>>> +				return true;
>>> +		}
>>> +	}
>>> +
>>> +	return false;
>>> +}
>>> +EXPORT_SYMBOL(drm_detect_hdmi_scdc_rr_capable);
>>> +
>>> +/**
>>>   * drm_detect_monitor_audio - check monitor audio capability
>>>   * @edid: EDID block to scan
>>>   *
>>> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
>>> index 7ea7e90846d8..d1c29586035e 100644
>>> --- a/include/drm/drm_edid.h
>>> +++ b/include/drm/drm_edid.h
>>> @@ -441,6 +441,7 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
>>>  enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code);
>>>  bool drm_detect_hdmi_monitor(struct edid *edid);
>>>  bool drm_detect_hdmi_scdc(struct edid *edid);
>>> +bool drm_detect_hdmi_scdc_rr_capable(struct edid *edid);
>>>  bool drm_detect_monitor_audio(struct edid *edid);
>>>  bool drm_rgb_quant_range_selectable(struct edid *edid);
>>>  int drm_add_modes_noedid(struct drm_connector *connector,

Best regards,
Jose Miguel Abreu