[PATCH 2/4] drm/i915: Compute sink's max lane count/link BW at Hotplug

[Jani Nikula]

On Tue, 06 Dec 2016, Manasi Navare <manasi.d.navare at intel.com> wrote:
> Sink's capabilities are advertised through DPCD registers and get
> updated only on hotplug. So they should be computed only once in the
> long pulse handler and saved off in intel_dp structure for the use
> later. For this reason two new fields max_sink_lane_count and
> max_sink_link_bw are added to intel_dp structure.
>
> This also simplifies the fallback link rate/lane count logic
> to handle link training failure. In that case, the max_sink_link_bw
> and max_sink_lane_count can be reccomputed to match the fallback
> values lowering the sink capabilities due to link train failure.
>
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter at intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

Eventually we may want to call the fields *link* rates, because that's
what they'll effectively be. Transient values that don't reflect the
sink or source capabilities, but the link capabilities.

> ---
>  drivers/gpu/drm/i915/intel_dp.c  | 10 ++++++++--
>  drivers/gpu/drm/i915/intel_drv.h |  4 ++++
>  2 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index db75bb9..434dc7d 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -156,7 +156,7 @@ static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
>  	u8 source_max, sink_max;
>  
>  	source_max = intel_dig_port->max_lanes;
> -	sink_max = drm_dp_max_lane_count(intel_dp->dpcd);
> +	sink_max = intel_dp->max_sink_lane_count;
>  
>  	return min(source_max, sink_max);
>  }
> @@ -213,7 +213,7 @@ static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
>  
>  	*sink_rates = default_rates;
>  
> -	return (intel_dp_max_link_bw(intel_dp) >> 3) + 1;
> +	return (intel_dp->max_sink_link_bw >> 3) + 1;
>  }
>  
>  static int
> @@ -4395,6 +4395,12 @@ static bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
>  		      yesno(intel_dp_source_supports_hbr2(intel_dp)),
>  		      yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
>  
> +	/* Set the max lane count for sink */
> +	intel_dp->max_sink_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
> +
> +	/* Set the max link BW for sink */
> +	intel_dp->max_sink_link_bw = intel_dp_max_link_bw(intel_dp);
> +
>  	intel_dp_print_rates(intel_dp);
>  
>  	intel_dp_read_desc(intel_dp);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index fd77a3b..b6526ad 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -906,6 +906,10 @@ struct intel_dp {
>  	/* sink rates as reported by DP_SUPPORTED_LINK_RATES */
>  	uint8_t num_sink_rates;
>  	int sink_rates[DP_MAX_SUPPORTED_RATES];
> +	/* Max lane count for the sink as per DPCD registers */
> +	uint8_t max_sink_lane_count;
> +	/* Max link BW for the sink as per DPCD registers */
> +	int max_sink_link_bw;
>  	/* sink or branch descriptor */
>  	struct intel_dp_desc desc;
>  	struct drm_dp_aux aux;

-- 
Jani Nikula, Intel Open Source Technology Center