[PATCH v2 6/6] drm/i915: Add a cursor hack to allow converting legacy page flip to atomic, v3.

[Maarten Lankhorst]

Op 13-12-16 om 14:01 schreef Archit Taneja:
> Hi,
>
> On 12/12/2016 4:04 PM, Maarten Lankhorst wrote:
>> Do something similar to vc4, only allow updating the cursor state
>> in-place through a fastpath when the watermarks are unaffected. This
>> will allow cursor movement to be smooth, but changing cursor size or
>> showing/hiding cursor will still fall back so watermarks can be updated.
>>
>> Only moving and changing fb is allowed.
>
> I was implementing something similar for msm kms. I have a comment/query
> below.
>
>>
>> Changes since v1:
>> - Set page flip to always_unused for trybot.
>> - Copy fence correctly, ignore plane_state->state, should be NULL.
>> - Check crtc_state for !active and modeset, go to slowpath if the case.
>> Changes since v2:
>> - Make error handling work correctly. (Matthew Auld)
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>> ---
>>  drivers/gpu/drm/i915/intel_atomic_plane.c |  47 +++++++----
>>  drivers/gpu/drm/i915/intel_display.c      | 132 +++++++++++++++++++++++++++++-
>>  drivers/gpu/drm/i915/intel_drv.h          |   2 +
>>  3 files changed, 163 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
>> index dbe9fb41ae53..60d75ce8a989 100644
>> --- a/drivers/gpu/drm/i915/intel_atomic_plane.c
>> +++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
>> @@ -103,36 +103,24 @@ intel_plane_destroy_state(struct drm_plane *plane,
>>      drm_atomic_helper_plane_destroy_state(plane, state);
>>  }
>>
>> -static int intel_plane_atomic_check(struct drm_plane *plane,
>> -                    struct drm_plane_state *state)
>> +int intel_plane_atomic_check_with_state(struct intel_crtc_state *crtc_state,
>> +                    struct intel_plane_state *intel_state)
>>  {
>> +    struct drm_plane *plane = intel_state->base.plane;
>>      struct drm_i915_private *dev_priv = to_i915(plane->dev);
>> -    struct drm_crtc *crtc = state->crtc;
>> -    struct intel_crtc *intel_crtc;
>> -    struct intel_crtc_state *crtc_state;
>> +    struct drm_plane_state *state = &intel_state->base;
>>      struct intel_plane *intel_plane = to_intel_plane(plane);
>> -    struct intel_plane_state *intel_state = to_intel_plane_state(state);
>> -    struct drm_crtc_state *drm_crtc_state;
>>      int ret;
>>
>> -    crtc = crtc ? crtc : plane->state->crtc;
>> -    intel_crtc = to_intel_crtc(crtc);
>> -
>>      /*
>>       * Both crtc and plane->crtc could be NULL if we're updating a
>>       * property while the plane is disabled.  We don't actually have
>>       * anything driver-specific we need to test in that case, so
>>       * just return success.
>>       */
>> -    if (!crtc)
>> +    if (!intel_state->base.crtc && !plane->state->crtc)
>>          return 0;
>>
>> -    drm_crtc_state = drm_atomic_get_existing_crtc_state(state->state, crtc);
>> -    if (WARN_ON(!drm_crtc_state))
>> -        return -EINVAL;
>> -
>> -    crtc_state = to_intel_crtc_state(drm_crtc_state);
>> -
>>      /* Clip all planes to CRTC size, or 0x0 if CRTC is disabled */
>>      intel_state->clip.x1 = 0;
>>      intel_state->clip.y1 = 0;
>> @@ -184,6 +172,31 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
>>      return intel_plane_atomic_calc_changes(&crtc_state->base, state);
>>  }
>>
>> +static int intel_plane_atomic_check(struct drm_plane *plane,
>> +                    struct drm_plane_state *state)
>> +{
>> +    struct drm_crtc *crtc = state->crtc;
>> +    struct drm_crtc_state *drm_crtc_state;
>> +
>> +    crtc = crtc ? crtc : plane->state->crtc;
>> +
>> +    /*
>> +     * Both crtc and plane->crtc could be NULL if we're updating a
>> +     * property while the plane is disabled.  We don't actually have
>> +     * anything driver-specific we need to test in that case, so
>> +     * just return success.
>> +     */
>> +    if (!crtc)
>> +        return 0;
>> +
>> +    drm_crtc_state = drm_atomic_get_existing_crtc_state(state->state, crtc);
>> +    if (WARN_ON(!drm_crtc_state))
>> +        return -EINVAL;
>> +
>> +    return intel_plane_atomic_check_with_state(to_intel_crtc_state(drm_crtc_state),
>> +                           to_intel_plane_state(state));
>> +}
>> +
>>  static void intel_plane_atomic_update(struct drm_plane *plane,
>>                        struct drm_plane_state *old_state)
>>  {
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 9eaf1e5bdae9..5568ecac2edc 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -15028,6 +15028,136 @@ const struct drm_plane_funcs intel_plane_funcs = {
>>      .atomic_destroy_state = intel_plane_destroy_state,
>>  };
>>
>> +static int
>> +intel_legacy_cursor_update(struct drm_plane *plane,
>> +               struct drm_crtc *crtc,
>> +               struct drm_framebuffer *fb,
>> +               int crtc_x, int crtc_y,
>> +               unsigned int crtc_w, unsigned int crtc_h,
>> +               uint32_t src_x, uint32_t src_y,
>> +               uint32_t src_w, uint32_t src_h)
>> +{
>> +    struct drm_i915_private *dev_priv = to_i915(crtc->dev);
>> +    int ret;
>> +    struct drm_plane_state *old_plane_state, *new_plane_state;
>> +    struct intel_plane *intel_plane = to_intel_plane(plane);
>> +    struct drm_framebuffer *old_fb;
>> +    struct drm_crtc_state *crtc_state = crtc->state;
>> +
>> +    /*
>> +     * When crtc is inactive or there is a modeset pending,
>> +     * wait for it to complete in the slowpath
>> +     */
>> +    if (!crtc_state->active || needs_modeset(crtc_state) ||
>> +        to_intel_crtc_state(crtc_state)->update_pipe)
>> +        goto slow;
>> +
>> +    old_plane_state = plane->state;
>> +
>> +    /*
>> +     * If any parameters change that may affect watermarks,
>> +     * take the slowpath. Only changing fb or position should be
>> +     * in the fastpath.
>> +     */
>> +    if (old_plane_state->crtc != crtc ||
>> +        old_plane_state->src_w != src_w ||
>> +        old_plane_state->src_h != src_h ||
>> +        old_plane_state->crtc_w != crtc_w ||
>> +        old_plane_state->crtc_h != crtc_h ||
>> +        !old_plane_state->visible ||
>> +        old_plane_state->fb->modifier != fb->modifier)
>> +        goto slow;
>> +
>> +    new_plane_state = intel_plane_duplicate_state(plane);
>> +    if (!new_plane_state)
>> +        return -ENOMEM;
>
> About creating a new plane state here and swapping it later, I guess
> it's more for the sake of intel_plane_atomic_check_with_state() to go
> through cleanly, right? Rather than directly modifying the old plane
> state?
i915 keeps some derived state in intel_plane_state, we copy the full state to make sure the full derived state is updated as well.

> I didn't see anything equivalent in vc4's implementation of
> update_plane, hence was wondering why exactly it is needed.
>
> Also, about updating fb in the fast path, my assumption was
> that it was only crtc_x/y was the thing most likely to be
> changed really fast. Have you seen use cases where the fb
> changes at a faster than vsync rate? 
It didn't cost much extra effort to implement fb changing too since that is handled in
intel's update_plane callback too. This is why I did that as well. I'm not sure it's needed in general.
Any changed fb still has to have the same size or we go to slowpath.

~Maarten