[PATCH v7 2/5] drm: bridge: add DT bindings for TI ths8135

[Archit Taneja]

Hi,

On 12/13/2016 03:39 PM, Bartosz Golaszewski wrote:
> THS8135 is a configurable video DAC. Add DT bindings for this chip.

Queued to drm-misc-next
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Acked-by: Rob Herring <robh at kernel.org>
> ---
>  .../bindings/display/bridge/ti,ths8135.txt         | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> new file mode 100644
> index 0000000..6ec1a88
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
> @@ -0,0 +1,46 @@
> +THS8135 Video DAC
> +-----------------
> +
> +This is the binding for Texas Instruments THS8135 Video DAC bridge.
> +
> +Required properties:
> +
> +- compatible: Must be "ti,ths8135"
> +
> +Required nodes:
> +
> +This device has two video ports. Their connections are modelled using the OF
> +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> +
> +- Video port 0 for RGB input
> +- Video port 1 for VGA output
> +
> +Example
> +-------
> +
> +vga-bridge {
> +	compatible = "ti,ths8135";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port at 0 {
> +			reg = <0>;
> +
> +			vga_bridge_in: endpoint {
> +				remote-endpoint = <&lcdc_out_vga>;
> +			};
> +		};
> +
> +		port at 1 {
> +			reg = <1>;
> +
> +			vga_bridge_out: endpoint {
> +				remote-endpoint = <&vga_con_in>;
> +			};
> +		};
> +	};
> +};
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project