[Intel-gfx] [PATCH 1/2] drm : adds Y-coordinate and Colorimetry Format

[Jani Nikula]

On Fri, 23 Dec 2016, "Nagaraju, Vathsala" <vathsala.nagaraju at intel.com> wrote:
> In DP V1.3 spec , Table 2-149 , page number-374 , for Register 0x2210
> , bit 7:4 is reserved.

See DP 1.4.

BR,
Jani.



>
> -----Original Message-----
> From: Jani Nikula [mailto:jani.nikula at linux.intel.com] 
> Sent: Friday, December 23, 2016 6:57 PM
> To: Nagaraju, Vathsala <vathsala.nagaraju at intel.com>; dri-devel at lists.freedesktop.org; intel-gfx at lists.freedesktop.org
> Cc: Vivi, Rodrigo <rodrigo.vivi at intel.com>
> Subject: Re: [Intel-gfx] [PATCH 1/2] drm : adds Y-coordinate and Colorimetry Format
>
> On Thu, 22 Dec 2016, vathsala nagaraju <vathsala.nagaraju at intel.com> wrote:
>> PSR2 vsc revision number hb2( as per table 6-11)is updated to
>> 4 or 5 based on Y cordinate and Colorimetry Format as below 04h = 3D 
>> stereo + PSR/PSR2 + Y-coordinate.
>> 05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel 
>> Encoding/Colorimetry Format indication. A DP Source device is allowed 
>> to indicate the pixel encoding/colorimetry format to the DP Sink 
>> device with VSC SDP only when the DP Sink device supports it ( 
>> i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the 
>> DPRX_FEATURE_ENUMERATION_LIST register (DPCD Address 02210h, bit 3; is 
>> set to 1).
>>
>> v2: (Jani)
>> - Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED.
>> - Add DP_PSR2_SU_GRANULARITY_REQUIRED.
>> - Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX.
>> - Add GTC_CAP and AV_SYNC_CAP, other bits in DPRX_FEATURE_ENUMERATION_LIST.
>>
>> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
>> Cc: Jim Bride <jim.bride at linux.intel.com>
>> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju at intel.com>
>> ---
>>  include/drm/drm_dp_helper.h | 8 +++++++-
>>  1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h 
>> index 55bbeb0..ee2a649d 100644
>> --- a/include/drm/drm_dp_helper.h
>> +++ b/include/drm/drm_dp_helper.h
>> @@ -194,7 +194,8 @@
>>  # define DP_PSR_SETUP_TIME_0                (6 << 1)
>>  # define DP_PSR_SETUP_TIME_MASK             (7 << 1)
>>  # define DP_PSR_SETUP_TIME_SHIFT            1
>> -
>> +# define DP_PSR2_SU_Y_COORDINATE_REQUIRED   (1 << 4)  /* eDP 1.4a */
>> +# define DP_PSR2_SU_GRANULARITY_REQUIRED    (1 << 5)  /* eDP 1.4b */
>>  /*
>>   * 0x80-0x8f describe downstream port capabilities, but there are two layouts
>>   * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set.  If it 
>> was not, @@ -568,6 +569,11 @@
>>  #define DP_RECEIVER_ALPM_STATUS		    0x200b  /* eDP 1.4 */
>>  # define DP_ALPM_LOCK_TIMEOUT_ERROR	    (1 << 0)
>>  
>> +#define DP_DPRX_FEATURE_ENUMERATION_LIST    0x2210
>> +# define DP_GTC_CAP					(1 << 0)
>> +# define DP_AV_SYNC_CAP					(1 << 2)
>> +# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED	(1 << 3)
>
> The spec continues with bits 4 to 7 in the next page...
>
>> +
>>  /* DP 1.2 Sideband message defines */
>>  /* peer device type - DP 1.2a Table 2-92 */
>>  #define DP_PEER_DEVICE_NONE		0x0
>
> --
> Jani Nikula, Intel Open Source Technology Center

-- 
Jani Nikula, Intel Open Source Technology Center