[PATCH v2 2/2] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board

[Hoegeun Kwon]

From: Hyungwon Hwang <human.hwang at samsung.com>

This patch add the panel device tree node for S6E3HA2 display
controller to TM2 dts.

Signed-off-by: Hyungwon Hwang <human.hwang at samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 33 +++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index db879f4..4ad2332 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -252,11 +252,44 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
+				remote-endpoint = <&dsi_in>;
 				samsung,burst-clock-frequency = <512000000>;
 				samsung,esc-clock-frequency = <16000000>;
 			};
 		};
 	};
+
+	panel at 0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+		power-on-delay = <120>;
+		reset-delay = <5>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <14874444>;
+				hactive = <1440>;
+				vactive = <2560>;
+				hfront-porch = <1>;
+				hback-porch = <1>;
+				hsync-len = <1>;
+				vfront-porch = <1>;
+				vback-porch = <15>;
+				vsync-len = <1>;
+			};
+		};
+
+		port {
+			dsi_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
 };
 
 &hsi2c_0 {
-- 
1.9.1