[Intel-gfx] [PATCH v4 34/38] drm: Wrap drm_mm_node.hole_follows

Daniel Vetter daniel at ffwll.ch
Wed Dec 28 13:02:27 UTC 2016


On Thu, Dec 22, 2016 at 08:36:37AM +0000, Chris Wilson wrote:
> Insulate users from changes to the internal hole tracking within
> struct drm_mm_node by using an accessor for hole_follows.
> 
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> Reviewed-by: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
> ---
>  drivers/gpu/drm/drm_mm.c                | 12 ++++++------
>  drivers/gpu/drm/i915/i915_vma.c         |  4 ++--

This required some wragling in i915_vma.c to make it apply to drm-misc,
and then resolving the conflict in drm-tip. Please double-check when
rebasing that I didn't botch it up.

Thanks, Daniel

>  drivers/gpu/drm/selftests/test-drm_mm.c | 18 ++++++++++--------
>  include/drm/drm_mm.h                    | 22 +++++++++++++++++++---
>  4 files changed, 37 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
> index b59978fe4c6e..c0024719f32b 100644
> --- a/drivers/gpu/drm/drm_mm.c
> +++ b/drivers/gpu/drm/drm_mm.c
> @@ -323,7 +323,7 @@ int drm_mm_reserve_node(struct drm_mm *mm, struct drm_mm_node *node)
>  	}
>  
>  	hole = list_last_entry(&hole->node_list, typeof(*hole), node_list);
> -	if (!hole->hole_follows)
> +	if (!drm_mm_hole_follows(hole))
>  		return -ENOSPC;
>  
>  	adj_start = hole_start = __drm_mm_hole_node_start(hole);
> @@ -408,7 +408,7 @@ static void drm_mm_insert_helper_range(struct drm_mm_node *hole_node,
>  	u64 adj_start = hole_start;
>  	u64 adj_end = hole_end;
>  
> -	DRM_MM_BUG_ON(!hole_node->hole_follows || node->allocated);
> +	DRM_MM_BUG_ON(!drm_mm_hole_follows(hole_node) || node->allocated);
>  
>  	if (adj_start < start)
>  		adj_start = start;
> @@ -523,16 +523,16 @@ void drm_mm_remove_node(struct drm_mm_node *node)
>  	prev_node =
>  	    list_entry(node->node_list.prev, struct drm_mm_node, node_list);
>  
> -	if (node->hole_follows) {
> +	if (drm_mm_hole_follows(node)) {
>  		DRM_MM_BUG_ON(__drm_mm_hole_node_start(node) ==
>  			      __drm_mm_hole_node_end(node));
>  		list_del(&node->hole_stack);
> -	} else
> +	} else {
>  		DRM_MM_BUG_ON(__drm_mm_hole_node_start(node) !=
>  			      __drm_mm_hole_node_end(node));
> +	}
>  
> -
> -	if (!prev_node->hole_follows) {
> +	if (!drm_mm_hole_follows(prev_node)) {
>  		prev_node->hole_follows = 1;
>  		list_add(&prev_node->hole_stack, &mm->hole_stack);
>  	} else
> diff --git a/drivers/gpu/drm/i915/i915_vma.c b/drivers/gpu/drm/i915/i915_vma.c
> index 608008d2d999..cfec4222b04e 100644
> --- a/drivers/gpu/drm/i915/i915_vma.c
> +++ b/drivers/gpu/drm/i915/i915_vma.c
> @@ -327,11 +327,11 @@ bool i915_gem_valid_gtt_space(struct i915_vma *vma, unsigned long cache_level)
>  	GEM_BUG_ON(list_empty(&node->node_list));
>  
>  	other = list_prev_entry(node, node_list);
> -	if (color_differs(other, cache_level) && !other->hole_follows)
> +	if (color_differs(other, cache_level) && !drm_mm_hole_follows(other))
>  		return false;
>  
>  	other = list_next_entry(node, node_list);
> -	if (color_differs(other, cache_level) && !node->hole_follows)
> +	if (color_differs(other, cache_level) && !drm_mm_hole_follows(node))
>  		return false;
>  
>  	return true;
> diff --git a/drivers/gpu/drm/selftests/test-drm_mm.c b/drivers/gpu/drm/selftests/test-drm_mm.c
> index f609e4f1eeaf..2ce92f4dcfc7 100644
> --- a/drivers/gpu/drm/selftests/test-drm_mm.c
> +++ b/drivers/gpu/drm/selftests/test-drm_mm.c
> @@ -63,7 +63,7 @@ static bool assert_no_holes(const struct drm_mm *mm)
>  	}
>  
>  	drm_mm_for_each_node(hole, mm) {
> -		if (hole->hole_follows) {
> +		if (drm_mm_hole_follows(hole)) {
>  			pr_err("Hole follows node, expected none!\n");
>  			return false;
>  		}
> @@ -125,7 +125,7 @@ static bool assert_continuous(const struct drm_mm *mm, u64 size)
>  			return false;
>  		}
>  
> -		if (node->hole_follows) {
> +		if (drm_mm_hole_follows(node)) {
>  			pr_err("node[%ld] is followed by a hole!\n", n);
>  			return false;
>  		}
> @@ -828,7 +828,8 @@ static bool assert_contiguous_in_range(struct drm_mm *mm,
>  			return false;
>  		}
>  
> -		if (node->hole_follows && drm_mm_hole_node_end(node) < end) {
> +		if (drm_mm_hole_follows(node) &&
> +		    drm_mm_hole_node_end(node) < end) {
>  			pr_err("node %d is followed by a hole!\n", n);
>  			return false;
>  		}
> @@ -1337,11 +1338,12 @@ static int evict_something(struct drm_mm *mm,
>  		err = -EINVAL;
>  	}
>  
> -	if (!assert_node(&tmp, mm, size, alignment, 0) || tmp.hole_follows) {
> +	if (!assert_node(&tmp, mm, size, alignment, 0) ||
> +	    drm_mm_hole_follows(&tmp)) {
>  		pr_err("Inserted did not fill the eviction hole: size=%lld [%d], align=%d [rem=%lld], start=%llx, hole-follows?=%d\n",
>  		       tmp.size, size,
>  		       alignment, misalignment(&tmp, alignment),
> -		       tmp.start, tmp.hole_follows);
> +		       tmp.start, drm_mm_hole_follows(&tmp));
>  		err = -EINVAL;
>  	}
>  
> @@ -1618,7 +1620,7 @@ static int igt_topdown(void *ignored)
>  				goto out;
>  			}
>  
> -			if (nodes[n].hole_follows) {
> +			if (drm_mm_hole_follows(&nodes[n])) {
>  				pr_err("hole after topdown insert %d, start=%llx\n, size=%u",
>  				       n, nodes[n].start, size);
>  				goto out;
> @@ -1650,7 +1652,7 @@ static int igt_topdown(void *ignored)
>  					goto out;
>  				}
>  
> -				if (node->hole_follows) {
> +				if (drm_mm_hole_follows(node)) {
>  					pr_err("hole after topdown insert %d/%d, start=%llx\n",
>  					       m, n, node->start);
>  					goto out;
> @@ -1705,7 +1707,7 @@ static void separate_adjacent_colors(const struct drm_mm_node *node,
>  
>  static bool colors_abutt(const struct drm_mm_node *node)
>  {
> -	if (!node->hole_follows &&
> +	if (!drm_mm_hole_follows(node) &&
>  	    list_next_entry(node, node_list)->allocated) {
>  		pr_err("colors abutt; %ld [%llx + %llx] is next to %ld [%llx + %llx]!\n",
>  		       node->color, node->start, node->size,
> diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
> index aed93cbc4bde..7da7a171d6d5 100644
> --- a/include/drm/drm_mm.h
> +++ b/include/drm/drm_mm.h
> @@ -155,6 +155,22 @@ static inline bool drm_mm_initialized(const struct drm_mm *mm)
>  	return mm->hole_stack.next;
>  }
>  
> +/**
> + * drm_mm_hole_follows - checks whether a hole follows this node
> + * @node: drm_mm_node to check
> + *
> + * Holes are embedded into the drm_mm using the tail of a drm_mm_node.
> + * If you wish to know whether a hole follows this particular node,
> + * query this function.
> + *
> + * Returns:
> + * True if a hole follows the @node.
> + */
> +static inline bool drm_mm_hole_follows(const struct drm_mm_node *node)
> +{
> +	return node->hole_follows;
> +}
> +
>  static inline u64 __drm_mm_hole_node_start(const struct drm_mm_node *hole_node)
>  {
>  	return hole_node->start + hole_node->size;
> @@ -166,14 +182,14 @@ static inline u64 __drm_mm_hole_node_start(const struct drm_mm_node *hole_node)
>   *
>   * This is useful for driver-specific debug dumpers. Otherwise drivers should
>   * not inspect holes themselves. Drivers must check first whether a hole indeed
> - * follows by looking at node->hole_follows.
> + * follows by looking at drm_mm_hole_follows()
>   *
>   * Returns:
>   * Start of the subsequent hole.
>   */
>  static inline u64 drm_mm_hole_node_start(const struct drm_mm_node *hole_node)
>  {
> -	DRM_MM_BUG_ON(!hole_node->hole_follows);
> +	DRM_MM_BUG_ON(!drm_mm_hole_follows(hole_node));
>  	return __drm_mm_hole_node_start(hole_node);
>  }
>  
> @@ -188,7 +204,7 @@ static inline u64 __drm_mm_hole_node_end(const struct drm_mm_node *hole_node)
>   *
>   * This is useful for driver-specific debug dumpers. Otherwise drivers should
>   * not inspect holes themselves. Drivers must check first whether a hole indeed
> - * follows by looking at node->hole_follows.
> + * follows by looking at drm_mm_hole_follows().
>   *
>   * Returns:
>   * End of the subsequent hole.
> -- 
> 2.11.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the dri-devel mailing list