[PATCH 1/2] drm : adds Y-coordinate and Colorimetry Format

[vathsala nagaraju]

PSR2 vsc revision number hb2( as per table 6-11)is updated to
4 or 5 based on Y cordinate and Colorimetry Format as below
04h = 3D stereo + PSR/PSR2 + Y-coordinate.
05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry
Format indication. A DP Source device is allowed to indicate the pixel
encoding/colorimetry format to the DP Sink device with VSC SDP only when
the DP Sink device supports it (
i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the
DPRX_FEATURE_ENUMERATION_LIST register (DPCD Address 02210h, bit 3;
is set to 1).

Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Cc: Jim Bride <jim.bride at linux.intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju at intel.com>
---
 include/drm/drm_dp_helper.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 55bbeb0..b3d2858 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -194,6 +194,7 @@
 # define DP_PSR_SETUP_TIME_0                (6 << 1)
 # define DP_PSR_SETUP_TIME_MASK             (7 << 1)
 # define DP_PSR_SETUP_TIME_SHIFT            1
+# define DP_PSR_Y_COORDINATE               (1 << 4)  /* eDP 1.4 */
 
 /*
  * 0x80-0x8f describe downstream port capabilities, but there are two layouts
@@ -568,6 +569,9 @@
 #define DP_RECEIVER_ALPM_STATUS		    0x200b  /* eDP 1.4 */
 # define DP_ALPM_LOCK_TIMEOUT_ERROR	    (1 << 0)
 
+#define DPRX_FEATURE_ENUMERATION_LIST	    0x2210
+# define VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED (1 << 3)
+
 /* DP 1.2 Sideband message defines */
 /* peer device type - DP 1.2a Table 2-92 */
 #define DP_PEER_DEVICE_NONE		0x0
-- 
1.9.1