[PATCH v10 09/13] arm64: dts: mt8173: Add HDMI related nodes
Philipp Zabel
p.zabel at pengutronix.de
Wed Feb 3 19:25:58 UTC 2016
From: CK Hu <ck.hu at mediatek.com>
This patch adds the device nodes for the HDMI encoder, HDMI PHY,
and HDMI CEC modules.
Signed-off-by: CK Hu <ck.hu at mediatek.com>
Signed-off-by: Cawa Cheng <cawa.cheng at mediatek.com>
Signed-off-by: Jie Qiu <jie.qiu at mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
---
Changes since v9:
- remove flt_5v pin setup
- disable cec, hdmi_phy, and hdmi0 nodes by default
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 69 ++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 44c205f..f82b7df 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -199,6 +199,16 @@
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ hdmi_pin: xxx {
+
+ /*hdmi htplg pin*/
+ pins1 {
+ pinmux = <MT8173_PIN_21_HTPLG__FUNC_HTPLG>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
i2c0_pins_a: i2c0 {
pins1 {
pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
@@ -286,6 +296,14 @@
clock-names = "spi", "wrap";
};
+ cec: cec at 10013000 {
+ compatible = "mediatek,mt8173-cec";
+ reg = <0 0x10013000 0 0xbc>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_CEC>;
+ status = "disabled";
+ };
+
sysirq: intpol-controller at 10200620 {
compatible = "mediatek,mt8173-sysirq",
"mediatek,mt6577-sysirq";
@@ -312,6 +330,19 @@
#clock-cells = <1>;
};
+ hdmi_phy: hdmi-phy at 10209100 {
+ compatible = "mediatek,mt8173-hdmi-phy";
+ reg = <0 0x10209100 0 0x24>;
+ clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+ clock-names = "pll_ref";
+ clock-output-names = "hdmitx_dig_cts";
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
mipi_tx0: mipi-dphy at 10215000 {
compatible = "mediatek,mt8173-mipi-tx";
reg = <0 0x10215000 0 0x1000>;
@@ -798,6 +829,12 @@
<&apmixedsys CLK_APMIXED_TVDPLL>;
clock-names = "pixel", "engine", "pll";
status = "disabled";
+
+ port {
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
};
pwm0: pwm at 1401e000 {
@@ -855,6 +892,38 @@
clock-names = "apb", "smi";
};
+ hdmi0: hdmi at 14025000 {
+ compatible = "mediatek,mt8173-hdmi";
+ reg = <0 0x14025000 0 0x400>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+ <&mmsys CLK_MM_HDMI_PLLCK>,
+ <&mmsys CLK_MM_HDMI_AUDIO>,
+ <&mmsys CLK_MM_HDMI_SPDIF>;
+ clock-names = "pixel", "pll", "bclk", "spdif";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pin>;
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ mediatek,syscon-hdmi = <&mmsys 0x900>;
+ assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>;
+ assigned-clock-parents = <&hdmi_phy>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+ };
+ };
+
larb4: larb at 14027000 {
compatible = "mediatek,mt8173-smi-larb";
reg = <0 0x14027000 0 0x1000>;
--
2.7.0.rc3
More information about the dri-devel
mailing list