[PATCHv11 02/17] dts: exynos4: add node for the HDMI CEC device

[Hans Verkuil]

From: Kamil Debski <kamil at wypas.org>

This patch adds HDMI CEC node specific to the Exynos4210/4x12 SoC series.

Signed-off-by: Kamil Debski <kamil at wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 045785c..8913408 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -751,6 +751,18 @@
 		status = "disabled";
 	};
 
+	hdmicec: cec at 100B0000 {
+		compatible = "samsung,s5p-cec";
+		reg = <0x100B0000 0x200>;
+		interrupts = <0 114 0>;
+		clocks = <&clock CLK_HDMI_CEC>;
+		clock-names = "hdmicec";
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_cec>;
+		status = "disabled";
+	};
+
 	mixer: mixer at 12C10000 {
 		compatible = "samsung,exynos4210-mixer";
 		interrupts = <0 91 0>;
-- 
2.7.0