[PATCHv12 12/17] cec: adv7604: add cec support.
Hans Verkuil
hverkuil at xs4all.nl
Wed Feb 10 12:51:46 UTC 2016
From: Hans Verkuil <hans.verkuil at cisco.com>
Add CEC support to the adv7604 driver.
Signed-off-by: Hans Verkuil <hansverk at cisco.com>
[k.debski at samsung.com: Merged changes from CEC Updates commit by Hans Verkuil]
[k.debski at samsung.com: add missing methods cec/io_write_and_or]
[k.debski at samsung.com: change adv7604 to adv76xx in added functions]
[hansverk at cisco.com: use _clr_set instead of _and_or]
---
drivers/media/i2c/adv7604.c | 254 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 250 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 1f0ce95..9355553 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -40,6 +40,7 @@
#include <linux/regmap.h>
#include <media/i2c/adv7604.h>
+#include <media/cec.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
@@ -80,6 +81,8 @@ MODULE_LICENSE("GPL");
#define ADV76XX_OP_SWAP_CB_CR (1 << 0)
+#define ADV76XX_MAX_ADDRS (3)
+
enum adv76xx_type {
ADV7604,
ADV7611,
@@ -184,6 +187,10 @@ struct adv76xx_state {
u16 spa_port_a[2];
struct v4l2_fract aspect_ratio;
u32 rgb_quantization_range;
+ u8 cec_addr[ADV76XX_MAX_ADDRS];
+ u8 cec_valid_addrs;
+ bool cec_enabled_adap;
+
struct workqueue_struct *work_queues;
struct delayed_work delayed_work_enable_hotplug;
bool restart_stdi_once;
@@ -430,7 +437,8 @@ static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val)
return regmap_write(state->regmap[ADV76XX_PAGE_IO], reg, val);
}
-static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
+static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
+ u8 val)
{
return io_write(sd, reg, (io_read(sd, reg) & ~mask) | val);
}
@@ -463,6 +471,12 @@ static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
return regmap_write(state->regmap[ADV76XX_PAGE_CEC], reg, val);
}
+static inline int cec_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
+ u8 val)
+{
+ return cec_write(sd, reg, (cec_read(sd, reg) & ~mask) | val);
+}
+
static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg)
{
struct adv76xx_state *state = to_state(sd);
@@ -550,8 +564,13 @@ static inline int edid_write_block(struct v4l2_subdev *sd,
static void adv76xx_set_hpd(struct adv76xx_state *state, unsigned int hpd)
{
+ u16 connected_inputs;
unsigned int i;
+ connected_inputs = hpd & state->info->read_cable_det(&state->sd);
+ v4l2_subdev_notify(&state->sd, V4L2_SUBDEV_CEC_CONN_INPUTS,
+ &connected_inputs);
+
for (i = 0; i < state->info->num_dv_ports; ++i)
gpiod_set_value_cansleep(state->hpd_gpio[i], hpd & BIT(i));
@@ -891,9 +910,12 @@ static int adv76xx_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd)
{
struct adv76xx_state *state = to_state(sd);
const struct adv76xx_chip_info *info = state->info;
+ u16 cable_det = info->read_cable_det(sd);
+ u16 connected_inputs = state->edid.present & cable_det;
- return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl,
- info->read_cable_det(sd));
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_CONN_INPUTS,
+ &connected_inputs);
+ return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, cable_det);
}
static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
@@ -1934,6 +1956,200 @@ static int adv76xx_set_format(struct v4l2_subdev *sd,
return 0;
}
+static void adv76xx_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
+{
+ struct v4l2_subdev_cec_tx_done tx_done = {};
+
+ if ((cec_read(sd, 0x11) & 0x01) == 0) {
+ v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
+ return;
+ }
+
+ if (tx_raw_status & 0x02) {
+ v4l2_dbg(1, debug, sd, "%s: tx raw: arbitration lost\n",
+ __func__);
+ tx_done.status = CEC_TX_STATUS_ARB_LOST;
+ tx_done.arb_lost_cnt = 1;
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE, &tx_done);
+ return;
+ }
+ if (tx_raw_status & 0x04) {
+ v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
+ /*
+ * We set this status bit since this hardware performs
+ * retransmissions.
+ */
+ tx_done.status = CEC_TX_STATUS_MAX_RETRIES;
+ tx_done.nack_cnt = cec_read(sd, 0x14) & 0xf;
+ if (tx_done.nack_cnt)
+ tx_done.status |= CEC_TX_STATUS_NACK;
+ tx_done.low_drive_cnt = cec_read(sd, 0x14) >> 4;
+ if (tx_done.low_drive_cnt)
+ tx_done.status |= CEC_TX_STATUS_LOW_DRIVE;
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE, &tx_done);
+ return;
+ }
+ if (tx_raw_status & 0x01) {
+ v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
+ tx_done.status = CEC_TX_STATUS_OK;
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE, &tx_done);
+ return;
+ }
+}
+
+static void adv76xx_cec_isr(struct v4l2_subdev *sd, bool *handled)
+{
+ u8 cec_irq;
+
+ /* cec controller */
+ cec_irq = io_read(sd, 0x4d) & 0x0f;
+ if (!cec_irq)
+ return;
+
+ v4l2_dbg(1, debug, sd, "%s: cec: irq 0x%x\n", __func__, cec_irq);
+ adv76xx_cec_tx_raw_status(sd, cec_irq);
+ if (cec_irq & 0x08) {
+ struct cec_msg msg;
+
+ msg.len = cec_read(sd, 0x25) & 0x1f;
+ if (msg.len > 16)
+ msg.len = 16;
+
+ if (msg.len) {
+ u8 i;
+
+ for (i = 0; i < msg.len; i++)
+ msg.msg[i] = cec_read(sd, i + 0x15);
+ cec_write(sd, 0x26, 0x01); /* re-enable rx */
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_RX_MSG, &msg);
+ }
+ }
+
+ /* note: the bit order is swapped between 0x4d and 0x4e */
+ cec_irq = ((cec_irq & 0x08) >> 3) | ((cec_irq & 0x04) >> 1) |
+ ((cec_irq & 0x02) << 1) | ((cec_irq & 0x01) << 3);
+ io_write(sd, 0x4e, cec_irq);
+
+ if (handled)
+ *handled = true;
+}
+
+static unsigned adv76xx_cec_adap_available_log_addrs(struct v4l2_subdev *sd)
+{
+ return ADV76XX_MAX_ADDRS;
+}
+
+static int adv76xx_cec_adap_enable(struct v4l2_subdev *sd, bool enable)
+{
+ struct adv76xx_state *state = to_state(sd);
+
+ if (!state->cec_enabled_adap && enable) {
+ cec_write_clr_set(sd, 0x2a, 0x01, 0x01); /* power up cec */
+ cec_write(sd, 0x2c, 0x01); /* cec soft reset */
+ cec_write_clr_set(sd, 0x11, 0x01, 0); /* initially disable tx */
+ /* enabled irqs: */
+ /* tx: ready */
+ /* tx: arbitration lost */
+ /* tx: retry timeout */
+ /* rx: ready */
+ io_write_clr_set(sd, 0x50, 0x0f, 0x0f);
+ cec_write(sd, 0x26, 0x01); /* enable rx */
+ } else if (state->cec_enabled_adap && !enable) {
+ /* disable cec interrupts */
+ io_write_clr_set(sd, 0x50, 0x0f, 0x00);
+ /* disable address mask 1-3 */
+ cec_write_clr_set(sd, 0x27, 0x70, 0x00);
+ /* power down cec section */
+ cec_write_clr_set(sd, 0x2a, 0x01, 0x00);
+ state->cec_valid_addrs = 0;
+ }
+ state->cec_enabled_adap = enable;
+ adv76xx_s_detect_tx_5v_ctrl(sd);
+ return 0;
+}
+
+static int adv76xx_cec_adap_log_addr(struct v4l2_subdev *sd, u8 addr)
+{
+ struct adv76xx_state *state = to_state(sd);
+ unsigned i, free_idx = ADV76XX_MAX_ADDRS;
+
+ if (!state->cec_enabled_adap)
+ return -EIO;
+
+ if (addr == CEC_LOG_ADDR_INVALID) {
+ cec_write_clr_set(sd, 0x27, 0x70, 0);
+ state->cec_valid_addrs = 0;
+ return 0;
+ }
+
+ for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
+ bool is_valid = state->cec_valid_addrs & (1 << i);
+
+ if (free_idx == ADV76XX_MAX_ADDRS && !is_valid)
+ free_idx = i;
+ if (is_valid && state->cec_addr[i] == addr)
+ return 0;
+ }
+ if (i == ADV76XX_MAX_ADDRS) {
+ i = free_idx;
+ if (i == ADV76XX_MAX_ADDRS)
+ return -ENXIO;
+ }
+ state->cec_addr[i] = addr;
+ state->cec_valid_addrs |= 1 << i;
+
+ switch (i) {
+ case 0:
+ /* enable address mask 0 */
+ cec_write_clr_set(sd, 0x27, 0x10, 0x10);
+ /* set address for mask 0 */
+ cec_write_clr_set(sd, 0x28, 0x0f, addr);
+ break;
+ case 1:
+ /* enable address mask 1 */
+ cec_write_clr_set(sd, 0x27, 0x20, 0x20);
+ /* set address for mask 1 */
+ cec_write_clr_set(sd, 0x28, 0xf0, addr << 4);
+ break;
+ case 2:
+ /* enable address mask 2 */
+ cec_write_clr_set(sd, 0x27, 0x40, 0x40);
+ /* set address for mask 1 */
+ cec_write_clr_set(sd, 0x29, 0x0f, addr);
+ break;
+ }
+ return 0;
+}
+
+static int adv76xx_cec_adap_transmit(struct v4l2_subdev *sd, u8 attempts,
+ u32 signal_free_time_ms, struct cec_msg *msg)
+{
+ u8 len = msg->len;
+ unsigned i;
+
+ /*
+ * The number of retries is the number of attempts - 1, but retry
+ * at least once. It's not clear if a value of 0 is allowed, so
+ * let's do at least one retry.
+ */
+ cec_write_clr_set(sd, 0x12, 0x70, max(1, attempts - 1) << 4);
+
+ if (len > 16) {
+ v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
+ return -EINVAL;
+ }
+
+ /* write data */
+ for (i = 0; i < len; i++)
+ cec_write(sd, i, msg->msg[i]);
+
+ /* set length (data + header) */
+ cec_write(sd, 0x10, len);
+ /* start transmit, enable tx */
+ cec_write(sd, 0x11, 0x01);
+ return 0;
+}
+
static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
{
struct adv76xx_state *state = to_state(sd);
@@ -1979,6 +2195,9 @@ static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
*handled = true;
}
+ /* cec */
+ adv76xx_cec_isr(sd, handled);
+
/* tx 5v detect */
tx_5v = irq_reg_0x70 & info->cable_det_mask;
if (tx_5v) {
@@ -2285,8 +2504,19 @@ static int adv76xx_log_status(struct v4l2_subdev *sd)
((edid_enabled & 0x02) ? "Yes" : "No"),
((edid_enabled & 0x04) ? "Yes" : "No"),
((edid_enabled & 0x08) ? "Yes" : "No"));
- v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ?
+ v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
"enabled" : "disabled");
+ if (state->cec_enabled_adap) {
+ int i;
+
+ for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
+ bool is_valid = state->cec_valid_addrs & (1 << i);
+
+ if (is_valid)
+ v4l2_info(sd, "CEC Logical Address: 0x%x\n",
+ state->cec_addr[i]);
+ }
+ }
v4l2_info(sd, "-----Signal status-----\n");
cable_det = info->read_cable_det(sd);
@@ -2421,6 +2651,13 @@ static const struct v4l2_subdev_video_ops adv76xx_video_ops = {
.query_dv_timings = adv76xx_query_dv_timings,
};
+static const struct v4l2_subdev_cec_ops adv76xx_cec_ops = {
+ .adap_available_log_addrs = adv76xx_cec_adap_available_log_addrs,
+ .adap_enable = adv76xx_cec_adap_enable,
+ .adap_log_addr = adv76xx_cec_adap_log_addr,
+ .adap_transmit = adv76xx_cec_adap_transmit,
+};
+
static const struct v4l2_subdev_pad_ops adv76xx_pad_ops = {
.enum_mbus_code = adv76xx_enum_mbus_code,
.get_selection = adv76xx_get_selection,
@@ -2436,6 +2673,7 @@ static const struct v4l2_subdev_ops adv76xx_ops = {
.core = &adv76xx_core_ops,
.video = &adv76xx_video_ops,
.pad = &adv76xx_pad_ops,
+ .cec = &adv76xx_cec_ops,
};
/* -------------------------- custom ctrls ---------------------------------- */
@@ -3274,6 +3512,14 @@ static int adv76xx_remove(struct i2c_client *client)
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct adv76xx_state *state = to_state(sd);
+ /* disable interrupts */
+ io_write(sd, 0x40, 0);
+ io_write(sd, 0x41, 0);
+ io_write(sd, 0x46, 0);
+ io_write(sd, 0x6e, 0);
+ io_write(sd, 0x73, 0);
+ adv76xx_cec_adap_enable(sd, false);
+
cancel_delayed_work(&state->delayed_work_enable_hotplug);
destroy_workqueue(state->work_queues);
v4l2_async_unregister_subdev(sd);
--
2.7.0
More information about the dri-devel
mailing list