[PATCH 17/29] drm/amd/dal: Add framebuffer compression HW programming
Harry Wentland
harry.wentland at amd.com
Thu Feb 11 17:19:57 UTC 2016
Adds framebuffer compression programming. Currently unused.
Signed-off-by: Harry Wentland <harry.wentland at amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
---
.../gpu/drm/amd/dal/dc/dce110/dce110_compressor.c | 886 +++++++++++++++++++++
.../gpu/drm/amd/dal/dc/dce110/dce110_compressor.h | 84 ++
2 files changed, 970 insertions(+)
create mode 100644 drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.c
create mode 100644 drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.h
diff --git a/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.c b/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.c
new file mode 100644
index 000000000000..285d54439f4c
--- /dev/null
+++ b/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.c
@@ -0,0 +1,886 @@
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "dm_services.h"
+
+#include "dce/dce_11_0_d.h"
+#include "dce/dce_11_0_sh_mask.h"
+#include "gmc/gmc_8_2_sh_mask.h"
+#include "gmc/gmc_8_2_d.h"
+
+#include "include/logger_interface.h"
+#include "include/adapter_service_interface.h"
+
+#include "dce110_compressor.h"
+
+#define DCP_REG(reg)\
+ (reg + cp110->offsets.dcp_offset)
+#define DMIF_REG(reg)\
+ (reg + cp110->offsets.dmif_offset)
+
+static const struct dce110_compressor_reg_offsets reg_offsets[] = {
+{
+ .dcp_offset = (mmDCP0_GRPH_CONTROL - mmDCP0_GRPH_CONTROL),
+ .dmif_offset =
+ (mmDMIF_PG0_DPG_PIPE_DPM_CONTROL
+ - mmDMIF_PG0_DPG_PIPE_DPM_CONTROL),
+},
+{
+ .dcp_offset = (mmDCP1_GRPH_CONTROL - mmDCP0_GRPH_CONTROL),
+ .dmif_offset =
+ (mmDMIF_PG1_DPG_PIPE_DPM_CONTROL
+ - mmDMIF_PG0_DPG_PIPE_DPM_CONTROL),
+},
+{
+ .dcp_offset = (mmDCP2_GRPH_CONTROL - mmDCP0_GRPH_CONTROL),
+ .dmif_offset =
+ (mmDMIF_PG2_DPG_PIPE_DPM_CONTROL
+ - mmDMIF_PG0_DPG_PIPE_DPM_CONTROL),
+}
+};
+
+static const uint32_t dce11_one_lpt_channel_max_resolution = 2560 * 1600;
+
+enum fbc_idle_force {
+ /* Bit 0 - Display registers updated */
+ FBC_IDLE_FORCE_DISPLAY_REGISTER_UPDATE = 0x00000001,
+
+ /* Bit 2 - FBC_GRPH_COMP_EN register updated */
+ FBC_IDLE_FORCE_GRPH_COMP_EN = 0x00000002,
+ /* Bit 3 - FBC_SRC_SEL register updated */
+ FBC_IDLE_FORCE_SRC_SEL_CHANGE = 0x00000004,
+ /* Bit 4 - FBC_MIN_COMPRESSION register updated */
+ FBC_IDLE_FORCE_MIN_COMPRESSION_CHANGE = 0x00000008,
+ /* Bit 5 - FBC_ALPHA_COMP_EN register updated */
+ FBC_IDLE_FORCE_ALPHA_COMP_EN = 0x00000010,
+ /* Bit 6 - FBC_ZERO_ALPHA_CHUNK_SKIP_EN register updated */
+ FBC_IDLE_FORCE_ZERO_ALPHA_CHUNK_SKIP_EN = 0x00000020,
+ /* Bit 7 - FBC_FORCE_COPY_TO_COMP_BUF register updated */
+ FBC_IDLE_FORCE_FORCE_COPY_TO_COMP_BUF = 0x00000040,
+
+ /* Bit 24 - Memory write to region 0 defined by MC registers. */
+ FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION0 = 0x01000000,
+ /* Bit 25 - Memory write to region 1 defined by MC registers */
+ FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION1 = 0x02000000,
+ /* Bit 26 - Memory write to region 2 defined by MC registers */
+ FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION2 = 0x04000000,
+ /* Bit 27 - Memory write to region 3 defined by MC registers. */
+ FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION3 = 0x08000000,
+
+ /* Bit 28 - Memory write from any client other than MCIF */
+ FBC_IDLE_FORCE_MEMORY_WRITE_OTHER_THAN_MCIF = 0x10000000,
+ /* Bit 29 - CG statics screen signal is inactive */
+ FBC_IDLE_FORCE_CG_STATIC_SCREEN_IS_INACTIVE = 0x20000000,
+};
+
+static uint32_t lpt_size_alignment(struct dce110_compressor *cp110)
+{
+ /*LPT_ALIGNMENT (in bytes) = ROW_SIZE * #BANKS * # DRAM CHANNELS. */
+ return cp110->base.raw_size * cp110->base.banks_num *
+ cp110->base.dram_channels_num;
+}
+
+static uint32_t lpt_memory_control_config(struct dce110_compressor *cp110,
+ uint32_t lpt_control)
+{
+ /*LPT MC Config */
+ if (cp110->base.options.bits.LPT_MC_CONFIG == 1) {
+ /* POSSIBLE VALUES for LPT NUM_PIPES (DRAM CHANNELS):
+ * 00 - 1 CHANNEL
+ * 01 - 2 CHANNELS
+ * 02 - 4 OR 6 CHANNELS
+ * (Only for discrete GPU, N/A for CZ)
+ * 03 - 8 OR 12 CHANNELS
+ * (Only for discrete GPU, N/A for CZ) */
+ switch (cp110->base.dram_channels_num) {
+ case 2:
+ set_reg_field_value(
+ lpt_control,
+ 1,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_NUM_PIPES);
+ break;
+ case 1:
+ set_reg_field_value(
+ lpt_control,
+ 0,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_NUM_PIPES);
+ break;
+ default:
+ dal_logger_write(
+ cp110->base.ctx->logger,
+ LOG_MAJOR_WARNING,
+ LOG_MINOR_COMPONENT_CONTROLLER,
+ "%s: Invalid LPT NUM_PIPES!!!",
+ __func__);
+ break;
+ }
+
+ /* The mapping for LPT NUM_BANKS is in
+ * GRPH_CONTROL.GRPH_NUM_BANKS register field
+ * Specifies the number of memory banks for tiling
+ * purposes. Only applies to 2D and 3D tiling modes.
+ * POSSIBLE VALUES:
+ * 00 - DCP_GRPH_NUM_BANKS_2BANK: ADDR_SURF_2_BANK
+ * 01 - DCP_GRPH_NUM_BANKS_4BANK: ADDR_SURF_4_BANK
+ * 02 - DCP_GRPH_NUM_BANKS_8BANK: ADDR_SURF_8_BANK
+ * 03 - DCP_GRPH_NUM_BANKS_16BANK: ADDR_SURF_16_BANK */
+ switch (cp110->base.banks_num) {
+ case 16:
+ set_reg_field_value(
+ lpt_control,
+ 3,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_NUM_BANKS);
+ break;
+ case 8:
+ set_reg_field_value(
+ lpt_control,
+ 2,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_NUM_BANKS);
+ break;
+ case 4:
+ set_reg_field_value(
+ lpt_control,
+ 1,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_NUM_BANKS);
+ break;
+ case 2:
+ set_reg_field_value(
+ lpt_control,
+ 0,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_NUM_BANKS);
+ break;
+ default:
+ dal_logger_write(
+ cp110->base.ctx->logger,
+ LOG_MAJOR_WARNING,
+ LOG_MINOR_COMPONENT_CONTROLLER,
+ "%s: Invalid LPT NUM_BANKS!!!",
+ __func__);
+ break;
+ }
+
+ /* The mapping is in DMIF_ADDR_CALC.
+ * ADDR_CONFIG_PIPE_INTERLEAVE_SIZE register field for
+ * Carrizo specifies the memory interleave per pipe.
+ * It effectively specifies the location of pipe bits in
+ * the memory address.
+ * POSSIBLE VALUES:
+ * 00 - ADDR_CONFIG_PIPE_INTERLEAVE_256B: 256 byte
+ * interleave
+ * 01 - ADDR_CONFIG_PIPE_INTERLEAVE_512B: 512 byte
+ * interleave
+ */
+ switch (cp110->base.channel_interleave_size) {
+ case 256: /*256B */
+ set_reg_field_value(
+ lpt_control,
+ 0,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_PIPE_INTERLEAVE_SIZE);
+ break;
+ case 512: /*512B */
+ set_reg_field_value(
+ lpt_control,
+ 1,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_PIPE_INTERLEAVE_SIZE);
+ break;
+ default:
+ dal_logger_write(
+ cp110->base.ctx->logger,
+ LOG_MAJOR_WARNING,
+ LOG_MINOR_COMPONENT_CONTROLLER,
+ "%s: Invalid LPT INTERLEAVE_SIZE!!!",
+ __func__);
+ break;
+ }
+
+ /* The mapping for LOW_POWER_TILING_ROW_SIZE is in
+ * DMIF_ADDR_CALC.ADDR_CONFIG_ROW_SIZE register field
+ * for Carrizo. Specifies the size of dram row in bytes.
+ * This should match up with NOOFCOLS field in
+ * MC_ARB_RAMCFG (ROW_SIZE = 4 * 2 ^^ columns).
+ * This register DMIF_ADDR_CALC is not used by the
+ * hardware as it is only used for addrlib assertions.
+ * POSSIBLE VALUES:
+ * 00 - ADDR_CONFIG_1KB_ROW: Treat 1KB as DRAM row
+ * boundary
+ * 01 - ADDR_CONFIG_2KB_ROW: Treat 2KB as DRAM row
+ * boundary
+ * 02 - ADDR_CONFIG_4KB_ROW: Treat 4KB as DRAM row
+ * boundary */
+ switch (cp110->base.raw_size) {
+ case 4096: /*4 KB */
+ set_reg_field_value(
+ lpt_control,
+ 2,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_ROW_SIZE);
+ break;
+ case 2048:
+ set_reg_field_value(
+ lpt_control,
+ 1,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_ROW_SIZE);
+ break;
+ case 1024:
+ set_reg_field_value(
+ lpt_control,
+ 0,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_ROW_SIZE);
+ break;
+ default:
+ dal_logger_write(
+ cp110->base.ctx->logger,
+ LOG_MAJOR_WARNING,
+ LOG_MINOR_COMPONENT_CONTROLLER,
+ "%s: Invalid LPT ROW_SIZE!!!",
+ __func__);
+ break;
+ }
+ } else {
+ dal_logger_write(
+ cp110->base.ctx->logger,
+ LOG_MAJOR_WARNING,
+ LOG_MINOR_COMPONENT_CONTROLLER,
+ "%s: LPT MC Configuration is not provided",
+ __func__);
+ }
+
+ return lpt_control;
+}
+
+
+
+static bool is_source_bigger_than_epanel_size(
+ struct dce110_compressor *cp110,
+ uint32_t source_view_width,
+ uint32_t source_view_height)
+{
+ if (cp110->base.embedded_panel_h_size != 0 &&
+ cp110->base.embedded_panel_v_size != 0 &&
+ ((source_view_width * source_view_height) >
+ (cp110->base.embedded_panel_h_size *
+ cp110->base.embedded_panel_v_size)))
+ return true;
+
+ return false;
+}
+
+static uint32_t align_to_chunks_number_per_line(
+ struct dce110_compressor *cp110,
+ uint32_t pixels)
+{
+ return 256 * ((pixels + 255) / 256);
+}
+
+static void wait_for_fbc_state_changed(
+ struct dce110_compressor *cp110,
+ bool enabled)
+{
+ uint8_t counter = 0;
+ uint32_t addr = mmFBC_STATUS;
+ uint32_t value;
+
+ while (counter < 10) {
+ value = dm_read_reg(cp110->base.ctx, addr);
+ if (get_reg_field_value(
+ value,
+ FBC_STATUS,
+ FBC_ENABLE_STATUS) == enabled)
+ break;
+ dm_delay_in_microseconds(cp110->base.ctx, 10);
+ counter++;
+ }
+
+ if (counter == 10) {
+ dal_logger_write(
+ cp110->base.ctx->logger,
+ LOG_MAJOR_WARNING,
+ LOG_MINOR_COMPONENT_CONTROLLER,
+ "%s: wait counter exceeded, changes to HW not applied",
+ __func__);
+ }
+}
+
+void dce110_compressor_power_up_fbc(struct compressor *compressor)
+{
+ uint32_t value;
+ uint32_t addr;
+
+ addr = mmFBC_CNTL;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(value, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
+ set_reg_field_value(value, 1, FBC_CNTL, FBC_EN);
+ set_reg_field_value(value, 2, FBC_CNTL, FBC_COHERENCY_MODE);
+ if (compressor->options.bits.CLK_GATING_DISABLED == 1) {
+ /* HW needs to do power measurement comparison. */
+ set_reg_field_value(
+ value,
+ 0,
+ FBC_CNTL,
+ FBC_COMP_CLK_GATE_EN);
+ }
+ dm_write_reg(compressor->ctx, addr, value);
+
+ addr = mmFBC_COMP_MODE;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_RLE_EN);
+ set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_DPCM4_RGB_EN);
+ set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_IND_EN);
+ dm_write_reg(compressor->ctx, addr, value);
+
+ addr = mmFBC_COMP_CNTL;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(value, 1, FBC_COMP_CNTL, FBC_DEPTH_RGB08_EN);
+ dm_write_reg(compressor->ctx, addr, value);
+ /*FBC_MIN_COMPRESSION 0 ==> 2:1 */
+ /* 1 ==> 4:1 */
+ /* 2 ==> 8:1 */
+ /* 0xF ==> 1:1 */
+ set_reg_field_value(value, 0xF, FBC_COMP_CNTL, FBC_MIN_COMPRESSION);
+ dm_write_reg(compressor->ctx, addr, value);
+ compressor->min_compress_ratio = FBC_COMPRESS_RATIO_1TO1;
+
+ value = 0;
+ dm_write_reg(compressor->ctx, mmFBC_IND_LUT0, value);
+
+ value = 0xFFFFFF;
+ dm_write_reg(compressor->ctx, mmFBC_IND_LUT1, value);
+}
+
+void dce110_compressor_enable_fbc(
+ struct compressor *compressor,
+ uint32_t paths_num,
+ struct compr_addr_and_pitch_params *params)
+{
+ struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+
+ if (compressor->options.bits.FBC_SUPPORT &&
+ (compressor->options.bits.DUMMY_BACKEND == 0) &&
+ (!dce110_compressor_is_fbc_enabled_in_hw(compressor, NULL)) &&
+ (!is_source_bigger_than_epanel_size(
+ cp110,
+ params->source_view_width,
+ params->source_view_height))) {
+
+ uint32_t addr;
+ uint32_t value;
+
+ /* Before enabling FBC first need to enable LPT if applicable
+ * LPT state should always be changed (enable/disable) while FBC
+ * is disabled */
+ if (compressor->options.bits.LPT_SUPPORT && (paths_num < 2) &&
+ (params->source_view_width *
+ params->source_view_height <=
+ dce11_one_lpt_channel_max_resolution)) {
+ dce110_compressor_enable_lpt(compressor);
+ }
+
+ addr = mmFBC_CNTL;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(value, 1, FBC_CNTL, FBC_GRPH_COMP_EN);
+ set_reg_field_value(
+ value,
+ params->inst,
+ FBC_CNTL, FBC_SRC_SEL);
+ dm_write_reg(compressor->ctx, addr, value);
+
+ /* Keep track of enum controller_id FBC is attached to */
+ compressor->is_enabled = true;
+ compressor->attached_inst = params->inst;
+ cp110->offsets = reg_offsets[params->inst - 1];
+
+ /*Toggle it as there is bug in HW */
+ set_reg_field_value(value, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
+ dm_write_reg(compressor->ctx, addr, value);
+ set_reg_field_value(value, 1, FBC_CNTL, FBC_GRPH_COMP_EN);
+ dm_write_reg(compressor->ctx, addr, value);
+
+ wait_for_fbc_state_changed(cp110, true);
+ }
+}
+
+void dce110_compressor_disable_fbc(struct compressor *compressor)
+{
+ struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+
+ if (compressor->options.bits.FBC_SUPPORT &&
+ dce110_compressor_is_fbc_enabled_in_hw(compressor, NULL)) {
+ uint32_t reg_data;
+ /* Turn off compression */
+ reg_data = dm_read_reg(compressor->ctx, mmFBC_CNTL);
+ set_reg_field_value(reg_data, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
+ dm_write_reg(compressor->ctx, mmFBC_CNTL, reg_data);
+
+ /* Reset enum controller_id to undefined */
+ compressor->attached_inst = 0;
+ compressor->is_enabled = false;
+
+ /* Whenever disabling FBC make sure LPT is disabled if LPT
+ * supported */
+ if (compressor->options.bits.LPT_SUPPORT)
+ dce110_compressor_disable_lpt(compressor);
+
+ wait_for_fbc_state_changed(cp110, false);
+ }
+}
+
+bool dce110_compressor_is_fbc_enabled_in_hw(
+ struct compressor *compressor,
+ uint32_t *inst)
+{
+ /* Check the hardware register */
+ uint32_t value;
+
+ value = dm_read_reg(compressor->ctx, mmFBC_STATUS);
+ if (get_reg_field_value(value, FBC_STATUS, FBC_ENABLE_STATUS)) {
+ if (inst != NULL)
+ *inst = compressor->attached_inst;
+ return true;
+ }
+
+ value = dm_read_reg(compressor->ctx, mmFBC_MISC);
+ if (get_reg_field_value(value, FBC_MISC, FBC_STOP_ON_HFLIP_EVENT)) {
+ value = dm_read_reg(compressor->ctx, mmFBC_CNTL);
+
+ if (get_reg_field_value(value, FBC_CNTL, FBC_GRPH_COMP_EN)) {
+ if (inst != NULL)
+ *inst =
+ compressor->attached_inst;
+ return true;
+ }
+ }
+ return false;
+}
+
+bool dce110_compressor_is_lpt_enabled_in_hw(struct compressor *compressor)
+{
+ /* Check the hardware register */
+ uint32_t value = dm_read_reg(compressor->ctx,
+ mmLOW_POWER_TILING_CONTROL);
+
+ return get_reg_field_value(
+ value,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_ENABLE);
+}
+
+void dce110_compressor_program_compressed_surface_address_and_pitch(
+ struct compressor *compressor,
+ struct compr_addr_and_pitch_params *params)
+{
+ struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+ uint32_t value = 0;
+ uint32_t fbc_pitch = 0;
+ uint32_t compressed_surf_address_low_part =
+ compressor->compr_surface_address.addr.low_part;
+
+ /* Clear content first. */
+ dm_write_reg(
+ compressor->ctx,
+ DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS_HIGH),
+ 0);
+ dm_write_reg(compressor->ctx,
+ DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS), 0);
+
+ if (compressor->options.bits.LPT_SUPPORT) {
+ uint32_t lpt_alignment = lpt_size_alignment(cp110);
+
+ if (lpt_alignment != 0) {
+ compressed_surf_address_low_part =
+ ((compressed_surf_address_low_part
+ + (lpt_alignment - 1)) / lpt_alignment)
+ * lpt_alignment;
+ }
+ }
+
+ /* Write address, HIGH has to be first. */
+ dm_write_reg(compressor->ctx,
+ DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS_HIGH),
+ compressor->compr_surface_address.addr.high_part);
+ dm_write_reg(compressor->ctx,
+ DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS),
+ compressed_surf_address_low_part);
+
+ fbc_pitch = align_to_chunks_number_per_line(
+ cp110,
+ params->source_view_width);
+
+ if (compressor->min_compress_ratio == FBC_COMPRESS_RATIO_1TO1)
+ fbc_pitch = fbc_pitch / 8;
+ else
+ dal_logger_write(
+ compressor->ctx->logger,
+ LOG_MAJOR_WARNING,
+ LOG_MINOR_COMPONENT_CONTROLLER,
+ "%s: Unexpected DCE11 compression ratio",
+ __func__);
+
+ /* Clear content first. */
+ dm_write_reg(compressor->ctx, DCP_REG(mmGRPH_COMPRESS_PITCH), 0);
+
+ /* Write FBC Pitch. */
+ set_reg_field_value(
+ value,
+ fbc_pitch,
+ GRPH_COMPRESS_PITCH,
+ GRPH_COMPRESS_PITCH);
+ dm_write_reg(compressor->ctx, DCP_REG(mmGRPH_COMPRESS_PITCH), value);
+
+}
+
+void dce110_compressor_disable_lpt(struct compressor *compressor)
+{
+ struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+ uint32_t value;
+ uint32_t addr;
+ uint32_t inx;
+
+ /* Disable all pipes LPT Stutter */
+ for (inx = 0; inx < 3; inx++) {
+ value =
+ dm_read_reg(
+ compressor->ctx,
+ DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH));
+ set_reg_field_value(
+ value,
+ 0,
+ DPG_PIPE_STUTTER_CONTROL_NONLPTCH,
+ STUTTER_ENABLE_NONLPTCH);
+ dm_write_reg(
+ compressor->ctx,
+ DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH),
+ value);
+ }
+ /* Disable Underlay pipe LPT Stutter */
+ addr = mmDPGV0_PIPE_STUTTER_CONTROL_NONLPTCH;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(
+ value,
+ 0,
+ DPGV0_PIPE_STUTTER_CONTROL_NONLPTCH,
+ STUTTER_ENABLE_NONLPTCH);
+ dm_write_reg(compressor->ctx, addr, value);
+
+ /* Disable LPT */
+ addr = mmLOW_POWER_TILING_CONTROL;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(
+ value,
+ 0,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_ENABLE);
+ dm_write_reg(compressor->ctx, addr, value);
+
+ /* Clear selection of Channel(s) containing Compressed Surface */
+ addr = mmGMCON_LPT_TARGET;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(
+ value,
+ 0xFFFFFFFF,
+ GMCON_LPT_TARGET,
+ STCTRL_LPT_TARGET);
+ dm_write_reg(compressor->ctx, mmGMCON_LPT_TARGET, value);
+}
+
+void dce110_compressor_enable_lpt(struct compressor *compressor)
+{
+ struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+ uint32_t value;
+ uint32_t addr;
+ uint32_t value_control;
+ uint32_t channels;
+
+ /* Enable LPT Stutter from Display pipe */
+ value = dm_read_reg(compressor->ctx,
+ DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH));
+ set_reg_field_value(
+ value,
+ 1,
+ DPG_PIPE_STUTTER_CONTROL_NONLPTCH,
+ STUTTER_ENABLE_NONLPTCH);
+ dm_write_reg(compressor->ctx,
+ DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH), value);
+
+ /* Enable Underlay pipe LPT Stutter */
+ addr = mmDPGV0_PIPE_STUTTER_CONTROL_NONLPTCH;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(
+ value,
+ 1,
+ DPGV0_PIPE_STUTTER_CONTROL_NONLPTCH,
+ STUTTER_ENABLE_NONLPTCH);
+ dm_write_reg(compressor->ctx, addr, value);
+
+ /* Selection of Channel(s) containing Compressed Surface: 0xfffffff
+ * will disable LPT.
+ * STCTRL_LPT_TARGETn corresponds to channel n. */
+ addr = mmLOW_POWER_TILING_CONTROL;
+ value_control = dm_read_reg(compressor->ctx, addr);
+ channels = get_reg_field_value(value_control,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_MODE);
+
+ addr = mmGMCON_LPT_TARGET;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(
+ value,
+ channels + 1, /* not mentioned in programming guide,
+ but follow DCE8.1 */
+ GMCON_LPT_TARGET,
+ STCTRL_LPT_TARGET);
+ dm_write_reg(compressor->ctx, addr, value);
+
+ /* Enable LPT */
+ addr = mmLOW_POWER_TILING_CONTROL;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(
+ value,
+ 1,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_ENABLE);
+ dm_write_reg(compressor->ctx, addr, value);
+}
+
+void dce110_compressor_program_lpt_control(
+ struct compressor *compressor,
+ struct compr_addr_and_pitch_params *params)
+{
+ struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor);
+ uint32_t rows_per_channel;
+ uint32_t lpt_alignment;
+ uint32_t source_view_width;
+ uint32_t source_view_height;
+ uint32_t lpt_control = 0;
+
+ if (!compressor->options.bits.LPT_SUPPORT)
+ return;
+
+ lpt_control = dm_read_reg(compressor->ctx,
+ mmLOW_POWER_TILING_CONTROL);
+
+ /* POSSIBLE VALUES for Low Power Tiling Mode:
+ * 00 - Use channel 0
+ * 01 - Use Channel 0 and 1
+ * 02 - Use Channel 0,1,2,3
+ * 03 - reserved */
+ switch (compressor->lpt_channels_num) {
+ /* case 2:
+ * Use Channel 0 & 1 / Not used for DCE 11 */
+ case 1:
+ /*Use Channel 0 for LPT for DCE 11 */
+ set_reg_field_value(
+ lpt_control,
+ 0,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_MODE);
+ break;
+ default:
+ dal_logger_write(
+ compressor->ctx->logger,
+ LOG_MAJOR_WARNING,
+ LOG_MINOR_COMPONENT_CONTROLLER,
+ "%s: Invalid selected DRAM channels for LPT!!!",
+ __func__);
+ break;
+ }
+
+ lpt_control = lpt_memory_control_config(cp110, lpt_control);
+
+ /* Program LOW_POWER_TILING_ROWS_PER_CHAN field which depends on
+ * FBC compressed surface pitch.
+ * LOW_POWER_TILING_ROWS_PER_CHAN = Roundup ((Surface Height *
+ * Surface Pitch) / (Row Size * Number of Channels *
+ * Number of Banks)). */
+ rows_per_channel = 0;
+ lpt_alignment = lpt_size_alignment(cp110);
+ source_view_width =
+ align_to_chunks_number_per_line(
+ cp110,
+ params->source_view_width);
+ source_view_height = (params->source_view_height + 1) & (~0x1);
+
+ if (lpt_alignment != 0) {
+ rows_per_channel = source_view_width * source_view_height * 4;
+ rows_per_channel =
+ (rows_per_channel % lpt_alignment) ?
+ (rows_per_channel / lpt_alignment + 1) :
+ rows_per_channel / lpt_alignment;
+ }
+
+ set_reg_field_value(
+ lpt_control,
+ rows_per_channel,
+ LOW_POWER_TILING_CONTROL,
+ LOW_POWER_TILING_ROWS_PER_CHAN);
+
+ dm_write_reg(compressor->ctx,
+ mmLOW_POWER_TILING_CONTROL, lpt_control);
+}
+
+/*
+ * DCE 11 Frame Buffer Compression Implementation
+ */
+
+
+void dce110_compressor_set_fbc_invalidation_triggers(
+ struct compressor *compressor,
+ uint32_t fbc_trigger)
+{
+ /* Disable region hit event, FBC_MEMORY_REGION_MASK = 0 (bits 16-19)
+ * for DCE 11 regions cannot be used - does not work with S/G
+ */
+ uint32_t addr = mmFBC_CLIENT_REGION_MASK;
+ uint32_t value = dm_read_reg(compressor->ctx, addr);
+
+ set_reg_field_value(
+ value,
+ 0,
+ FBC_CLIENT_REGION_MASK,
+ FBC_MEMORY_REGION_MASK);
+ dm_write_reg(compressor->ctx, addr, value);
+
+ /* Setup events when to clear all CSM entries (effectively marking
+ * current compressed data invalid)
+ * For DCE 11 CSM metadata 11111 means - "Not Compressed"
+ * Used as the initial value of the metadata sent to the compressor
+ * after invalidation, to indicate that the compressor should attempt
+ * to compress all chunks on the current pass. Also used when the chunk
+ * is not successfully written to memory.
+ * When this CSM value is detected, FBC reads from the uncompressed
+ * buffer. Set events according to passed in value, these events are
+ * valid for DCE11:
+ * - bit 0 - display register updated
+ * - bit 28 - memory write from any client except from MCIF
+ * - bit 29 - CG static screen signal is inactive
+ * In addition, DCE11.1 also needs to set new DCE11.1 specific events
+ * that are used to trigger invalidation on certain register changes,
+ * for example enabling of Alpha Compression may trigger invalidation of
+ * FBC once bit is set. These events are as follows:
+ * - Bit 2 - FBC_GRPH_COMP_EN register updated
+ * - Bit 3 - FBC_SRC_SEL register updated
+ * - Bit 4 - FBC_MIN_COMPRESSION register updated
+ * - Bit 5 - FBC_ALPHA_COMP_EN register updated
+ * - Bit 6 - FBC_ZERO_ALPHA_CHUNK_SKIP_EN register updated
+ * - Bit 7 - FBC_FORCE_COPY_TO_COMP_BUF register updated
+ */
+ addr = mmFBC_IDLE_FORCE_CLEAR_MASK;
+ value = dm_read_reg(compressor->ctx, addr);
+ set_reg_field_value(
+ value,
+ fbc_trigger |
+ FBC_IDLE_FORCE_GRPH_COMP_EN |
+ FBC_IDLE_FORCE_SRC_SEL_CHANGE |
+ FBC_IDLE_FORCE_MIN_COMPRESSION_CHANGE |
+ FBC_IDLE_FORCE_ALPHA_COMP_EN |
+ FBC_IDLE_FORCE_ZERO_ALPHA_CHUNK_SKIP_EN |
+ FBC_IDLE_FORCE_FORCE_COPY_TO_COMP_BUF,
+ FBC_IDLE_FORCE_CLEAR_MASK,
+ FBC_IDLE_FORCE_CLEAR_MASK);
+ dm_write_reg(compressor->ctx, addr, value);
+}
+
+bool dce110_compressor_construct(struct dce110_compressor *compressor,
+ struct dc_context *ctx, struct adapter_service *as)
+{
+ struct embedded_panel_info panel_info;
+
+ compressor->base.options.bits.FBC_SUPPORT = true;
+ if (!(dal_adapter_service_is_feature_supported(
+ FEATURE_DISABLE_LPT_SUPPORT)))
+ compressor->base.options.bits.LPT_SUPPORT = true;
+ /* For DCE 11 always use one DRAM channel for LPT */
+ compressor->base.lpt_channels_num = 1;
+
+ if (dal_adapter_service_is_feature_supported(FEATURE_DUMMY_FBC_BACKEND))
+ compressor->base.options.bits.DUMMY_BACKEND = true;
+
+ /* Check if this system has more than 1 DRAM channel; if only 1 then LPT
+ * should not be supported */
+ if (compressor->base.memory_bus_width == 64)
+ compressor->base.options.bits.LPT_SUPPORT = false;
+
+ if (dal_adapter_service_is_feature_supported(
+ FEATURE_DISABLE_FBC_COMP_CLK_GATE))
+ compressor->base.options.bits.CLK_GATING_DISABLED = true;
+
+ compressor->base.ctx = ctx;
+ compressor->base.embedded_panel_h_size = 0;
+ compressor->base.embedded_panel_v_size = 0;
+ compressor->base.memory_bus_width =
+ dal_adapter_service_get_asic_vram_bit_width(as);
+ compressor->base.allocated_size = 0;
+ compressor->base.preferred_requested_size = 0;
+ compressor->base.min_compress_ratio = FBC_COMPRESS_RATIO_INVALID;
+ compressor->base.options.raw = 0;
+ compressor->base.banks_num = 0;
+ compressor->base.raw_size = 0;
+ compressor->base.channel_interleave_size = 0;
+ compressor->base.dram_channels_num = 0;
+ compressor->base.lpt_channels_num = 0;
+ compressor->base.attached_inst = 0;
+ compressor->base.is_enabled = false;
+
+ if (dal_adapter_service_get_embedded_panel_info(as,
+ &panel_info)) {
+ compressor->base.embedded_panel_h_size =
+ panel_info.lcd_timing.horizontal_addressable;
+ compressor->base.embedded_panel_v_size =
+ panel_info.lcd_timing.vertical_addressable;
+ }
+ return true;
+}
+
+struct compressor *dce110_compressor_create(struct dc_context *ctx,
+ struct adapter_service *as)
+{
+ struct dce110_compressor *cp110 =
+ dm_alloc(ctx, sizeof(struct dce110_compressor));
+
+ if (!cp110)
+ return NULL;
+
+ if (dce110_compressor_construct(cp110, ctx, as))
+ return &cp110->base;
+
+ BREAK_TO_DEBUGGER();
+ dm_free(ctx, cp110);
+ return NULL;
+}
+
+void dce110_compressor_destroy(struct compressor **compressor)
+{
+ dm_free((*compressor)->ctx, TO_DCE110_COMPRESSOR(*compressor));
+ *compressor = NULL;
+}
diff --git a/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.h b/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.h
new file mode 100644
index 000000000000..0beef2243d04
--- /dev/null
+++ b/drivers/gpu/drm/amd/dal/dc/dce110/dce110_compressor.h
@@ -0,0 +1,84 @@
+/* Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#ifndef __DC_COMPRESSOR_DCE110_H__
+#define __DC_COMPRESSOR_DCE110_H__
+
+#include "../inc/compressor.h"
+
+#define TO_DCE110_COMPRESSOR(compressor)\
+ container_of(compressor, struct dce110_compressor, base)
+
+struct dce110_compressor_reg_offsets {
+ uint32_t dcp_offset;
+ uint32_t dmif_offset;
+};
+
+struct dce110_compressor {
+ struct compressor base;
+ struct dce110_compressor_reg_offsets offsets;
+};
+
+struct compressor *dce110_compressor_create(struct dc_context *ctx,
+ struct adapter_service *as);
+
+bool dce110_compressor_construct(struct dce110_compressor *cp110,
+ struct dc_context *ctx, struct adapter_service *as);
+
+void dce110_compressor_destroy(struct compressor **cp);
+
+/* FBC RELATED */
+void dce110_compressor_power_up_fbc(struct compressor *cp);
+
+void dce110_compressor_enable_fbc(struct compressor *cp, uint32_t paths_num,
+ struct compr_addr_and_pitch_params *params);
+
+void dce110_compressor_disable_fbc(struct compressor *cp);
+
+void dce110_compressor_set_fbc_invalidation_triggers(struct compressor *cp,
+ uint32_t fbc_trigger);
+
+void dce110_compressor_program_compressed_surface_address_and_pitch(
+ struct compressor *cp,
+ struct compr_addr_and_pitch_params *params);
+
+bool dce110_compressor_get_required_compressed_surface_size(
+ struct compressor *cp,
+ struct fbc_input_info *input_info,
+ struct fbc_requested_compressed_size *size);
+
+bool dce110_compressor_is_fbc_enabled_in_hw(struct compressor *cp,
+ uint32_t *fbc_mapped_crtc_id);
+
+/* LPT RELATED */
+void dce110_compressor_enable_lpt(struct compressor *cp);
+
+void dce110_compressor_disable_lpt(struct compressor *cp);
+
+void dce110_compressor_program_lpt_control(struct compressor *cp,
+ struct compr_addr_and_pitch_params *params);
+
+bool dce110_compressor_is_lpt_enabled_in_hw(struct compressor *cp);
+
+#endif
--
2.1.4
More information about the dri-devel
mailing list