[PATCH v7 3/5] dma-buf: Add ioctls to allow userspace to flush
Tiago Vignatti
tiago.vignatti at intel.com
Thu Feb 11 17:54:38 UTC 2016
Thanks for reviewing, David. Please take a look in my comments in-line.
On 02/09/2016 07:26 AM, David Herrmann wrote:
>
> On Tue, Dec 22, 2015 at 10:36 PM, Tiago Vignatti
> <tiago.vignatti at intel.com> wrote:
>> From: Daniel Vetter <daniel.vetter at ffwll.ch>
>>
>> The userspace might need some sort of cache coherency management e.g. when CPU
>> and GPU domains are being accessed through dma-buf at the same time. To
>> circumvent this problem there are begin/end coherency markers, that forward
>> directly to existing dma-buf device drivers vfunc hooks. Userspace can make use
>> of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be
>> used like following:
>> - mmap dma-buf fd
>> - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
>> to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
>> want (with the new data being consumed by the GPU or say scanout device)
>> - munmap once you don't need the buffer any more
>>
>> v2 (Tiago): Fix header file type names (u64 -> __u64)
>> v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end
>> dma-buf functions. Check for overflows in start/length.
>> v4 (Tiago): use 2d regions for sync.
>> v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and
>> remove range information from struct dma_buf_sync.
>> v6 (Tiago): use __u64 structured padded flags instead enum. Adjust
>> documentation about the recommendation on using sync ioctls.
>> v7 (Tiago): Alex' nit on flags definition and being even more wording in the
>> doc about sync usage.
>>
>> Cc: Sumit Semwal <sumit.semwal at linaro.org>
>> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
>> Signed-off-by: Tiago Vignatti <tiago.vignatti at intel.com>
>> ---
>> Documentation/dma-buf-sharing.txt | 21 ++++++++++++++++++-
>> drivers/dma-buf/dma-buf.c | 43 +++++++++++++++++++++++++++++++++++++++
>> include/uapi/linux/dma-buf.h | 38 ++++++++++++++++++++++++++++++++++
>> 3 files changed, 101 insertions(+), 1 deletion(-)
>> create mode 100644 include/uapi/linux/dma-buf.h
>>
>> diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt
>> index 4f4a84b..32ac32e 100644
>> --- a/Documentation/dma-buf-sharing.txt
>> +++ b/Documentation/dma-buf-sharing.txt
>> @@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases:
>> handles, too). So it's beneficial to support this in a similar fashion on
>> dma-buf to have a good transition path for existing Android userspace.
>>
>> - No special interfaces, userspace simply calls mmap on the dma-buf fd.
>> + No special interfaces, userspace simply calls mmap on the dma-buf fd, making
>> + sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always*
>> + used when the access happens. This is discussed next paragraphs.
>> +
>> + Some systems might need some sort of cache coherency management e.g. when
>> + CPU and GPU domains are being accessed through dma-buf at the same time. To
>> + circumvent this problem there are begin/end coherency markers, that forward
>> + directly to existing dma-buf device drivers vfunc hooks. Userspace can make
>> + use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence
>> + would be used like following:
>> + - mmap dma-buf fd
>> + - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
>> + to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
>> + want (with the new data being consumed by the GPU or say scanout device)
>> + - munmap once you don't need the buffer any more
>> +
>> + Therefore, for correctness and optimal performance, systems with the memory
>> + cache shared by the GPU and CPU i.e. the "coherent" and also the
>> + "incoherent" are always required to use SYNC_START and SYNC_END before and
>> + after, respectively, when accessing the mapped address.
>>
>> 2. Supporting existing mmap interfaces in importers
>>
>> diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
>> index b2ac13b..9a298bd 100644
>> --- a/drivers/dma-buf/dma-buf.c
>> +++ b/drivers/dma-buf/dma-buf.c
>> @@ -34,6 +34,8 @@
>> #include <linux/poll.h>
>> #include <linux/reservation.h>
>>
>> +#include <uapi/linux/dma-buf.h>
>> +
>> static inline int is_dma_buf_file(struct file *);
>>
>> struct dma_buf_list {
>> @@ -251,11 +253,52 @@ out:
>> return events;
>> }
>>
>> +static long dma_buf_ioctl(struct file *file,
>> + unsigned int cmd, unsigned long arg)
>> +{
>> + struct dma_buf *dmabuf;
>> + struct dma_buf_sync sync;
>> + enum dma_data_direction direction;
>> +
>> + dmabuf = file->private_data;
>> +
>> + if (!is_dma_buf_file(file))
>> + return -EINVAL;
>
> Why? This can never happen, and you better not use dma_buf_ioctl()
> outside of dma_buf_fops..
> I guess it's simply copied from the other fop callbacks, but I don't
> see why. dma_buf_poll() doesn't do it, neither should this, or one of
> the other 3 callbacks.
yup. I fixed now.
>> +
>> + switch (cmd) {
>> + case DMA_BUF_IOCTL_SYNC:
>> + if (copy_from_user(&sync, (void __user *) arg, sizeof(sync)))
>> + return -EFAULT;
>> +
>> + if (sync.flags & DMA_BUF_SYNC_RW)
>> + direction = DMA_BIDIRECTIONAL;
>> + else if (sync.flags & DMA_BUF_SYNC_READ)
>> + direction = DMA_FROM_DEVICE;
>> + else if (sync.flags & DMA_BUF_SYNC_WRITE)
>> + direction = DMA_TO_DEVICE;
>> + else
>> + return -EINVAL;
>
> This looks bogus. It always ends up being "DMA_BIDIRECTIONAL" or
> EINVAL. I recommend changing it to:
>
> switch (sync.flags & DMA_BUF_SYNC_RW) {
> case DMA_BUF_SYNC_READ:
> direction = DMA_FROM_DEVICE;
> break;
> case DMA_BUF_SYNC_WRITE:
> direction = DMA_TO_DEVICE;
> break;
> case DMA_BUF_SYNC_READ:
> direction = DMA_BIDIRECTIONAL;
> break;
> default:
> return -EINVAL;
> }
hmm I can't really get what's wrong with my snip. Why bogus? Can you
double-check actually your suggestion, cause that's wrong with _READ
being repeated.
>> +
>> + if (sync.flags & ~DMA_BUF_SYNC_VALID_FLAGS_MASK)
>> + return -EINVAL;
>
> Why isn't this done immediately after copy_from_user()?
done.
>> +
>> + if (sync.flags & DMA_BUF_SYNC_END)
>> + dma_buf_end_cpu_access(dmabuf, direction);
>> + else
>> + dma_buf_begin_cpu_access(dmabuf, direction);
>
> Why are SYNC_START and SYNC_END exclusive? It feels very natural to me
> to invoke both at the same time (especially if two objects are stored
> in the same dma-buf).
Can you open a bit and teach how two objects would be stored in the same
dma-buf? I didn't care about this case and if we want that, we'd need
also to change the sequence of accesses as described in the
dma-buf-sharing.txt I'm proposing in this patch.
>> +
>> + return 0;
>> + default:
>> + return -ENOTTY;
>> + }
>> +}
>> +
>> static const struct file_operations dma_buf_fops = {
>> .release = dma_buf_release,
>> .mmap = dma_buf_mmap_internal,
>> .llseek = dma_buf_llseek,
>> .poll = dma_buf_poll,
>> + .unlocked_ioctl = dma_buf_ioctl,
>> };
>>
>> /*
>> diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h
>> new file mode 100644
>> index 0000000..4a9b36b
>> --- /dev/null
>> +++ b/include/uapi/linux/dma-buf.h
>> @@ -0,0 +1,38 @@
>> +/*
>> + * Framework for buffer objects that can be shared across devices/subsystems.
>> + *
>> + * Copyright(C) 2015 Intel Ltd
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef _DMA_BUF_UAPI_H_
>> +#define _DMA_BUF_UAPI_H_
>> +
>> +/* begin/end dma-buf functions used for userspace mmap. */
>> +struct dma_buf_sync {
>> + __u64 flags;
>> +};
>
> Please add '#include <linux/types.h>', otherwise this header cannot be
> compiled on its own (missing __u64).
done.
>> +
>> +#define DMA_BUF_SYNC_READ (1 << 0)
>> +#define DMA_BUF_SYNC_WRITE (2 << 0)
>> +#define DMA_BUF_SYNC_RW (DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE)
>> +#define DMA_BUF_SYNC_START (0 << 2)
>> +#define DMA_BUF_SYNC_END (1 << 2)
>> +#define DMA_BUF_SYNC_VALID_FLAGS_MASK \
>> + (DMA_BUF_SYNC_RW | DMA_BUF_SYNC_END)
>> +
>> +#define DMA_BUF_BASE 'b'
>> +#define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
>
> Why _IOW? A read-only ioctl should be able to call DMA_BUF_SYNC_READ, right?
yup. I've changed it to _IOWR now.
Tiago
More information about the dri-devel
mailing list