[PATCH v14 13/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed

Yakir Yang ykk at rock-chips.com
Mon Feb 15 11:11:15 UTC 2016


Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.

This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.

Signed-off-by: Yakir Yang <ykk at rock-chips.com>
Acked-by: Rob Herring <robh at kernel.org>
Tested-by: Javier Martinez Canillas <javier at osg.samsung.com>
---
Changes in v14: None
Changes in v13: None
Changes in v12: None
Changes in v11:
- Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
- Add the ack from Rob Herring

Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add "analogix,need-force-hpd" to indicate whether driver need foce
  hpd when hpd detect failed.

Changes in v2: None

 .../bindings/display/bridge/analogix_dp.txt        |  4 ++-
 .../bindings/display/exynos/exynos_dp.txt          |  1 +
 .../display/rockchip/analogix_dp-rockchip.txt      |  1 +
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 35 ++++++++++++++++++----
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |  2 ++
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  |  9 ++++++
 6 files changed, 46 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 7659a7a..4f2ba8c 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -22,6 +22,9 @@ Required properties for dp-controller:
 		from general PHY binding: Should be "dp".
 
 Optional properties for dp-controller:
+	-force-hpd:
+		Indicate driver need force hpd when hpd detect failed, this
+		is used for some eDP screen which don't have hpd signal.
 	-hpd-gpios:
 		Hotplug detect GPIO.
 		Indicates which GPIO should be used for hotplug detection
@@ -31,7 +34,6 @@ Optional properties for dp-controller:
 		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
 		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
 
-
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 -------------------------------------------------------------------------------
 
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 4fa8aca..ade5d8e 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -56,6 +56,7 @@ For the below properties, please refer to Analogix DP binding document:
 	-phys (required)
 	-phy-names (required)
 	-hpd-gpios (optional)
+	 force-hpd (optional)
 
 Deprecated properties for DisplayPort:
 -interlaced:            deprecated prop that can parsed from drm_display_mode.
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index 04d99e3..e832ff9 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -32,6 +32,7 @@ For the below properties, please refer to Analogix DP binding document:
 - phys (required)
 - phy-names (required)
 - hpd-gpios (optional)
+- force-hpd (optional)
 -------------------------------------------------------------------------------
 
 Example:
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index a62e8d0..13986b7 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -62,15 +62,38 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
 {
 	int timeout_loop = 0;
 
-	while (analogix_dp_get_plug_in_status(dp) != 0) {
+	while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+		if (analogix_dp_get_plug_in_status(dp) == 0)
+			return 0;
+
 		timeout_loop++;
-		if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
-			dev_err(dp->dev, "failed to get hpd plug status\n");
-			return -ETIMEDOUT;
-		}
 		usleep_range(10, 11);
 	}
 
+	/*
+	 * Some edp screen do not have hpd signal, so we can't just
+	 * return failed when hpd plug in detect failed, DT property
+	 * "force-hpd" would indicate whether driver need this.
+	 */
+	if (!dp->force_hpd)
+		return -ETIMEDOUT;
+
+	/*
+	 * The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+	 * will not work, so we need to give a force hpd action to
+	 * set HPD_STATUS manually.
+	 */
+	dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n");
+
+	analogix_dp_force_hpd(dp);
+
+	if (analogix_dp_get_plug_in_status(dp) != 0) {
+		dev_err(dp->dev, "failed to get hpd plug in status\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dp->dev, "success to get plug in status after force hpd\n");
+
 	return 0;
 }
 
@@ -1291,6 +1314,8 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 	if (IS_ERR(dp->reg_base))
 		return PTR_ERR(dp->reg_base);
 
+	dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd");
+
 	dp->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpios", 0);
 	if (!gpio_is_valid(dp->hpd_gpio))
 		dp->hpd_gpio = of_get_named_gpio(dev->of_node,
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 02c0ecf..22aff07 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -154,6 +154,7 @@ struct analogix_dp_device {
 	struct phy		*phy;
 	int			dpms_mode;
 	int			hpd_gpio;
+	bool                    force_hpd;
 
 	struct analogix_dp_plat_data *plat_data;
 };
@@ -174,6 +175,7 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
 				       bool enable);
 void analogix_dp_init_analog_func(struct analogix_dp_device *dp);
 void analogix_dp_init_hpd(struct analogix_dp_device *dp);
+void analogix_dp_force_hpd(struct analogix_dp_device *dp);
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
 void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp);
 void analogix_dp_reset_aux(struct analogix_dp_device *dp);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 1e24b37..cba3ffd 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -365,6 +365,15 @@ void analogix_dp_init_hpd(struct analogix_dp_device *dp)
 	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
 }
 
+void analogix_dp_force_hpd(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	reg = (F_HPD | HPD_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
 enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
 {
 	u32 reg;
-- 
1.9.1




More information about the dri-devel mailing list