[PATCH 27/33] drm/omap: HDMI5: Add interlace support

Tomi Valkeinen tomi.valkeinen at ti.com
Fri Feb 19 09:48:02 UTC 2016


Add the missing bits for interlace:

* Set VBLANK_OSC if the videomode's vblank is fractional
* Halve the vertical timings for interlace
* Double the horizontal timings for double-pixel mode
* Set FC_PRCONF properly for double-pixel mode

Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
 drivers/gpu/drm/omapdrm/dss/hdmi5_core.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
index 947edb9d4275..6a397520cae5 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
@@ -298,10 +298,30 @@ static void hdmi_core_init(struct hdmi_core_vid_config *video_cfg,
 	video_cfg->data_enable_pol = 1; /* It is always 1*/
 	video_cfg->hblank = cfg->timings.hfp +
 				cfg->timings.hbp + cfg->timings.hsw;
-	video_cfg->vblank_osc = 0; /* Always 0 - need to confirm */
+	video_cfg->vblank_osc = 0;
 	video_cfg->vblank = cfg->timings.vsw +
 				cfg->timings.vfp + cfg->timings.vbp;
 	video_cfg->v_fc_config.hdmi_dvi_mode = cfg->hdmi_dvi_mode;
+
+	if (cfg->timings.interlace) {
+		/* set vblank_osc if vblank is fractional */
+		if (video_cfg->vblank % 2 != 0)
+			video_cfg->vblank_osc = 1;
+
+		video_cfg->v_fc_config.timings.y_res /= 2;
+		video_cfg->vblank /= 2;
+		video_cfg->v_fc_config.timings.vfp /= 2;
+		video_cfg->v_fc_config.timings.vsw /= 2;
+		video_cfg->v_fc_config.timings.vbp /= 2;
+	}
+
+	if (cfg->timings.double_pixel) {
+		video_cfg->v_fc_config.timings.x_res *= 2;
+		video_cfg->hblank *= 2;
+		video_cfg->v_fc_config.timings.hfp *= 2;
+		video_cfg->v_fc_config.timings.hsw *= 2;
+		video_cfg->v_fc_config.timings.hbp *= 2;
+	}
 }
 
 /* DSS_HDMI_CORE_VIDEO_CONFIG */
@@ -368,6 +388,11 @@ static void hdmi_core_video_config(struct hdmi_core_data *core,
 	/* select DVI mode */
 	REG_FLD_MOD(base, HDMI_CORE_FC_INVIDCONF,
 			cfg->v_fc_config.hdmi_dvi_mode, 3, 3);
+
+	if (cfg->v_fc_config.timings.double_pixel)
+		REG_FLD_MOD(base, HDMI_CORE_FC_PRCONF, 2, 7, 4);
+	else
+		REG_FLD_MOD(base, HDMI_CORE_FC_PRCONF, 1, 7, 4);
 }
 
 static void hdmi_core_config_video_packetizer(struct hdmi_core_data *core)
-- 
2.5.0



More information about the dri-devel mailing list