[PATCH v2 1/3] drm/fsl-dcu: use mode flags for hsync/vsync polarity

[Thierry Reding]

On Mon, Feb 08, 2016 at 01:57:41PM -0800, Stefan Agner wrote:
> The current default configuration is as follows:
> - Invert VSYNC signal (active LOW)
> - Invert HSYNC signal (active LOW)
> 
> The mode flags allow to specify the required polarity per
> mode. Furthermore, none of the current driver settings is
> actually a standard polarity.
> 
> This patch applies the current driver default polarities as
> explicit flags to the display which has been introduced with
> the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now
> also parses the flags field and applies the configuration
> accordingly, by using the following values as standard
> polarities: (e.g. when no flags are specified):
> - VSYNC signal not inverted (active HIGH)
> - HSYNC signal not inverted (active HIGH)
> 
> Signed-off-by: Stefan Agner <stefan at agner.ch>
> ---
>  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 11 ++++++++---
>  drivers/gpu/drm/panel/panel-simple.c       |  1 +
>  2 files changed, 9 insertions(+), 3 deletions(-)

Acked-by: Thierry Reding <treding at nvidia.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20160225/f5202e26/attachment.sig>