[PATCH 2/2] drm: bridge: add sil902x DT bindings doc

[Boris Brezillon]

Add Sil9022 DT bindings description.

Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
 .../devicetree/bindings/display/bridge/sil902x.txt | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/sil902x.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/sil902x.txt b/Documentation/devicetree/bindings/display/bridge/sil902x.txt
new file mode 100644
index 0000000..7f1339f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil902x.txt
@@ -0,0 +1,31 @@
+sil902x HDMI bridge bindings
+
+Required properties:
+	- compatible: "sil,sil9022"
+	- reg: i2c address of the bridge
+	- reset-gpios: OF device-tree gpio specification for RST_N pin.
+
+Optional properties:
+	- interrupts-extended or interrupt-parent + interrupts: describe
+	  the interrupt line used to inform the host about hotplug events.
+
+Optional subnodes:
+	- video input: Device node can contain video input port node to
+	  connect the bridge to a display controller output (See this
+	  documentation [1]).
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+	hdmi-bridge at 39 {
+		compatible = "sil,sil9022";
+		reg = <0x39>;
+		reset-gpios = <&gpx1 5 1 0 0>;
+		ports {
+			port at 0 {
+				bridge_in: endpoint {
+					remote-endpoint = <&dc_out>;
+				};
+			};
+		};
+	};
-- 
2.1.4