[PATCH v2 2/3] drm/exynos: use generic code for managing zpos plane property
Marek Szyprowski
m.szyprowski at samsung.com
Tue Jan 12 01:34:27 PST 2016
Hello,
On 2016-01-11 16:13, Daniel Vetter wrote:
> On Mon, Jan 11, 2016 at 12:03:04PM +0100, Marek Szyprowski wrote:
>> This patch replaces zpos property handling custom code in Exynos DRM
>> driver with calls to generic DRM code.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
>> ---
>> drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 -
>> drivers/gpu/drm/exynos/exynos_drm_plane.c | 66 +++++++------------------------
>> drivers/gpu/drm/exynos/exynos_mixer.c | 19 +++++++--
>> 3 files changed, 30 insertions(+), 56 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> index 17b5ded72ff1..244ae6c4482c 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> @@ -217,7 +217,6 @@ struct exynos_drm_private {
>> * this array is used to be aware of which crtc did it request vblank.
>> */
>> struct drm_crtc *crtc[MAX_CRTC];
>> - struct drm_property *plane_zpos_property;
>>
>> unsigned long da_start;
>> unsigned long da_space_size;
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c
>> index d86227236f55..ba46bc3de796 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c
>> @@ -137,9 +137,9 @@ static void exynos_drm_plane_reset(struct drm_plane *plane)
>>
>> exynos_state = kzalloc(sizeof(*exynos_state), GFP_KERNEL);
>> if (exynos_state) {
>> - exynos_state->zpos = exynos_plane->config->zpos;
>> plane->state = &exynos_state->base;
>> plane->state->plane = plane;
>> + plane->state->zpos = exynos_plane->config->zpos;
>> }
>> }
>>
>> @@ -155,7 +155,6 @@ exynos_drm_plane_duplicate_state(struct drm_plane *plane)
>> return NULL;
>>
>> __drm_atomic_helper_plane_duplicate_state(plane, ©->base);
>> - copy->zpos = exynos_state->zpos;
>> return ©->base;
>> }
>>
>> @@ -168,43 +167,6 @@ static void exynos_drm_plane_destroy_state(struct drm_plane *plane,
>> kfree(old_exynos_state);
>> }
>>
>> -static int exynos_drm_plane_atomic_set_property(struct drm_plane *plane,
>> - struct drm_plane_state *state,
>> - struct drm_property *property,
>> - uint64_t val)
>> -{
>> - struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane);
>> - struct exynos_drm_plane_state *exynos_state =
>> - to_exynos_plane_state(state);
>> - struct exynos_drm_private *dev_priv = plane->dev->dev_private;
>> - const struct exynos_drm_plane_config *config = exynos_plane->config;
>> -
>> - if (property == dev_priv->plane_zpos_property &&
>> - (config->capabilities & EXYNOS_DRM_PLANE_CAP_ZPOS))
>> - exynos_state->zpos = val;
>> - else
>> - return -EINVAL;
>> -
>> - return 0;
>> -}
>> -
>> -static int exynos_drm_plane_atomic_get_property(struct drm_plane *plane,
>> - const struct drm_plane_state *state,
>> - struct drm_property *property,
>> - uint64_t *val)
>> -{
>> - const struct exynos_drm_plane_state *exynos_state =
>> - container_of(state, const struct exynos_drm_plane_state, base);
>> - struct exynos_drm_private *dev_priv = plane->dev->dev_private;
>> -
>> - if (property == dev_priv->plane_zpos_property)
>> - *val = exynos_state->zpos;
>> - else
>> - return -EINVAL;
>> -
>> - return 0;
>> -}
>> -
>> static struct drm_plane_funcs exynos_plane_funcs = {
>> .update_plane = drm_atomic_helper_update_plane,
>> .disable_plane = drm_atomic_helper_disable_plane,
>> @@ -213,8 +175,6 @@ static struct drm_plane_funcs exynos_plane_funcs = {
>> .reset = exynos_drm_plane_reset,
>> .atomic_duplicate_state = exynos_drm_plane_duplicate_state,
>> .atomic_destroy_state = exynos_drm_plane_destroy_state,
>> - .atomic_set_property = exynos_drm_plane_atomic_set_property,
>> - .atomic_get_property = exynos_drm_plane_atomic_get_property,
>> };
>>
>> static int
>> @@ -302,20 +262,21 @@ static const struct drm_plane_helper_funcs plane_helper_funcs = {
>> };
>>
>> static void exynos_plane_attach_zpos_property(struct drm_plane *plane,
>> - unsigned int zpos)
>> + unsigned int zpos, bool immutable)
>> {
>> struct drm_device *dev = plane->dev;
>> - struct exynos_drm_private *dev_priv = dev->dev_private;
>> struct drm_property *prop;
>>
>> - prop = dev_priv->plane_zpos_property;
>> - if (!prop) {
>> - prop = drm_property_create_range(dev, 0, "zpos",
>> - 0, MAX_PLANE - 1);
>> - if (!prop)
>> - return;
>> -
>> - dev_priv->plane_zpos_property = prop;
>> + if (immutable) {
>> + if (!dev->mode_config.zpos_immutable_property)
>> + if (!drm_mode_create_zpos_immutable_property(dev))
>> + return;
>> + prop = dev->mode_config.zpos_immutable_property;
>> + } else {
>> + if (!dev->mode_config.zpos_property)
>> + if (!drm_mode_create_zpos_property(dev))
>> + return;
>> + prop = dev->mode_config.zpos_property;
>> }
>>
>> drm_object_attach_property(&plane->base, prop, zpos);
>> @@ -344,7 +305,8 @@ int exynos_plane_init(struct drm_device *dev,
>> exynos_plane->index = index;
>> exynos_plane->config = config;
>>
>> - exynos_plane_attach_zpos_property(&exynos_plane->base, config->zpos);
>> + exynos_plane_attach_zpos_property(&exynos_plane->base, config->zpos,
>> + !(config->capabilities & EXYNOS_DRM_PLANE_CAP_ZPOS));
>>
>> return 0;
>> }
>> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
>> index b5fbc1cbf024..6ab68eca0004 100644
>> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
>> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
>> @@ -34,6 +34,7 @@
>> #include <linux/component.h>
>>
>> #include <drm/exynos_drm.h>
>> +#include <drm/drm_atomic_helper.h>
>>
>> #include "exynos_drm_drv.h"
>> #include "exynos_drm_crtc.h"
>> @@ -95,6 +96,8 @@ struct mixer_context {
>> struct drm_device *drm_dev;
>> struct exynos_drm_crtc *crtc;
>> struct exynos_drm_plane planes[MIXER_WIN_NR];
>> + struct drm_plane *zpos_planes[MIXER_WIN_NR];
>> + int num_planes;
>> int pipe;
>> unsigned long flags;
>> bool interlace;
>> @@ -478,6 +481,7 @@ static void vp_video_buffer(struct mixer_context *ctx,
>> struct drm_display_mode *mode = &state->base.crtc->state->adjusted_mode;
>> struct mixer_resources *res = &ctx->mixer_res;
>> struct drm_framebuffer *fb = state->base.fb;
>> + unsigned int priority = state->base.normalized_zpos + 1;
>> unsigned long flags;
>> dma_addr_t luma_addr[2], chroma_addr[2];
>> bool tiled_mode = false;
>> @@ -562,7 +566,7 @@ static void vp_video_buffer(struct mixer_context *ctx,
>>
>> mixer_cfg_scan(ctx, mode->vdisplay);
>> mixer_cfg_rgb_fmt(ctx, mode->vdisplay);
>> - mixer_cfg_layer(ctx, plane->index, state->zpos + 1, true);
>> + mixer_cfg_layer(ctx, plane->index, priority, true);
>> mixer_cfg_vp_blend(ctx);
>> mixer_run(ctx);
>>
>> @@ -587,6 +591,7 @@ static void mixer_graph_buffer(struct mixer_context *ctx,
>> struct drm_display_mode *mode = &state->base.crtc->state->adjusted_mode;
>> struct mixer_resources *res = &ctx->mixer_res;
>> struct drm_framebuffer *fb = state->base.fb;
>> + unsigned int priority = state->base.normalized_zpos + 1;
>> unsigned long flags;
>> unsigned int win = plane->index;
>> unsigned int x_ratio = 0, y_ratio = 0;
>> @@ -678,7 +683,7 @@ static void mixer_graph_buffer(struct mixer_context *ctx,
>>
>> mixer_cfg_scan(ctx, mode->vdisplay);
>> mixer_cfg_rgb_fmt(ctx, mode->vdisplay);
>> - mixer_cfg_layer(ctx, win, state->zpos + 1, true);
>> + mixer_cfg_layer(ctx, win, priority, true);
>> mixer_cfg_gfx_blend(ctx, win, is_alpha_format(fb->pixel_format));
>>
>> /* layer update mandatory for mixer 16.0.33.0 */
>> @@ -981,6 +986,12 @@ static void mixer_atomic_begin(struct exynos_drm_crtc *crtc)
>> if (!test_bit(MXR_BIT_POWERED, &mixer_ctx->flags))
>> return;
>>
>> + /*
>> + * Normalizing up to 3 planes is cheap, no need for checking
>> + * if zpos has been really changed.
>> + */
>> + drm_atomic_helper_normalize_zpos(mixer_ctx->zpos_planes,
>> + mixer_ctx->num_planes);
> Hm, this is a bit a cumbersome interface for drivers and will make
> converting over to the normalized zpos more work. Can't we handle this in
> the atomic helpers directly? I'm thinking of the following flow:
>
> - if new_plane_state->zpos != old_plane_state->zpos then set new_crtc_state->zpos_changed
> - if new_crtc_state->plane_mask != old_crtc_state->plane_mask ||
> new_crtc_state->zpos_changed then recompute normilized zpos.
>
> Imo that would fit well in drm_atomic_helper_check_planes().
>
> With that bit of additional logic drivers can just use normlized_zpos and
> don't need to care about anything really.
Okay, I will try to implement this logic.
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
More information about the dri-devel
mailing list