[PATCH 3/3] arm64: tegra: Populate SOR power domain for DSI

[Jon Hunter]

The DSI device requires that the SOR power partition is enabled when
active. Populate this power partition for the Tegra210 DSI nodes.

Signed-off-by: Jon Hunter <jonathanh at nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 99c5e9f69f72..2885a119b430 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -109,6 +109,7 @@
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_sor>;
 			nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
 
 			status = "disabled";
@@ -138,6 +139,7 @@
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
+			power-domains = <&pd_sor>;
 			nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
 
 			status = "disabled";
-- 
2.1.4