[PATCH 12/16] gpu: ipu-v3: Fix CSI0 blur in NTSC format

[Philipp Zabel]

Am Donnerstag, den 07.07.2016, 16:03 -0700 schrieb Steve Longerbeam:
> From: Suresh Dhandapani <Suresh.Dhandapani at in.bosch.com>
> 
> This patch will change the register IPU_CSI0_CCIR_CODE_2 value from
> 0x40596 to 0x405A6. The change is related to the Start of field 1
> first blanking line command bit[5-3] for NTSC format only. This
> change is dependent with ADV chip where the NEWAVMODE is set to 0
> in register 0x31. Setting NEWAVMODE to "0" in ADV means "EAV/SAV
> codes generated to suit analog devices encoders".
> 
> Signed-off-by: Suresh Dhandapani <Suresh.Dhandapani at in.bosch.com>
> ---
>  drivers/gpu/ipu-v3/ipu-csi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c
> index 0eac28c..ec81958 100644
> --- a/drivers/gpu/ipu-v3/ipu-csi.c
> +++ b/drivers/gpu/ipu-v3/ipu-csi.c
> @@ -422,7 +422,7 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
>  
>  			ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN,
>  					  CSI_CCIR_CODE_1);
> -			ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2);
> +			ipu_csi_write(csi, 0x405A6, CSI_CCIR_CODE_2);
>  			ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
>  		} else {
>  			dev_err(csi->ipu->dev,

This looks like a very hardware specific hack? I'll at least have to
test if that also works with other analog decoders.

regards
Philipp