[v5 PATCH 0/5] Rockchip Type-C and DisplayPort driver
Chris Zhong
zyw at rock-chips.com
Tue Jul 12 15:09:43 UTC 2016
Hi all
This series patch is for rockchip Type-C phy and DisplayPort controller
driver.
The USB Type-C PHY is designed to support the USB3 and DP applications.
The PHY basically has two main components: USB3 and DisplyPort. USB3
operates in SuperSpeed mode and the DP can operate at RBR, HBR and HBR2
data rates. The Type-C cable orientation detection and Power Delivery
(PD) is accomplished using a PD PHY or a exernal PD chip.
The DP controller is compliant with DisplayPort Specification,
Version 1.3, This IP is compatible with the rockchip type-c PHY IP.
There is a uCPU in DP controller, it need a firmware to work, please
put the firmware file[0] to /lib/firmware/cdn/dptx.bin. The uCPU in charge
of aux communication and link training, the host use mailbox to
communicate with the ucpu.
The DP contoller has register a notification with extcon API, to get the
alt mode from PD, the PD driver need call the devm_extcon_dev_allocate
to create a extcon device and use extcon_set_state to notify DP
controller. And call extcon_set_cable_property to set orientation.
About the DP audio, cdn-dp registered 2 DAIs: 0 is I2S, 1 is SPDIF.
We can reference them in simple-card.
This series is based on Mark Yao's branch[1] and Chanwoo Choi's
extcon-test branch[2]
I test this patches on the rk3399-evb board, with a fusb302 driver,
this branch has no rk3399.dtsi, so the patch about dts is not included
in this series.
[0]
https://patchwork.kernel.org/patch/9225567/
[1]
https://github.com/markyzq/kernel-drm-rockchip/tree/drm-rockchip-next-2016-05-23
[2]
https://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/log/?h=extcon-test
- usb: dwc3: omap: Support the changed method to get the state of connector
- usb: chipdata: Support the changed method to get the state of connector
- extcon: Add the support for extcon property according to type of connector
- extcon: Add the extcon_type to group each connector into five category
Changes in v5:
- support get property
- support get property from extcon
- remove PIN ASSIGN A/B support
- alphabetical order
- do not use long, use u32 or u64
- return MODE_CLOCK_HIGH when requested > actual
- Optimized Coding Style
- add a formula to get better tu size and symbol value.
Changes in v4:
- add a #phy-cells node
- select EXTCON
- use phy framework to control the USB3 and DP function
- rename PIN_MAP_ to PIN_ASSIGN_
- add a reset node
- support 2 phys
- use phy framework to control DP phy
- support 2 phys
Changes in v3:
- use compatible: rockchip,rk3399-typec-phy
- use dashes instead of underscores.
- remove the phy framework(Kishon Vijay Abraham I)
- add parentheses around the macro
- use a single space between type and name
- add spaces after opening and before closing braces.
- use u16 for register value
- remove type-c phy header file
- CodingStyle optimization
- use some cable extcon to get type-c port information
- add a extcon to notify Display Port
- add SoC specific compatible string
- remove reg = <1>;
- use EXTCON_DISP_DP and EXTCON_DISP_DP_ALT cable to get dp port state.
- reset spdif before config it
- modify the firmware clk to 100Mhz
- retry load firmware if fw file is requested too early
Changes in v2:
- add some registers description
- select RESET_CONTROLLER
- alphabetic order
- modify some spelling mistakes
- make mode cleaner
- use bool for enable/disable
- check all of the return value
- return a better err number
- use more readx_poll_timeout()
- clk_disable_unprepare(tcphy->clk_ref);
- remove unuse functions, rockchip_typec_phy_power_on/off
- remove unnecessary typecast from void *
- use dts node to distinguish between phys.
- Alphabetic order
- remove excess error message
- use define clk_rate
- check all return value
- remove dev_set_name(dp->dev, "cdn-dp");
- use schedule_delayed_work
- remove never-called functions
- remove some unnecessary ()
Changes in v1:
- add extcon node description
- move the registers in phy driver
- remove the suffix of reset
- update the licence note
- init core clock to 50MHz
- use extcon API
- remove unused global
- add some comments for magic num
- change usleep_range(1000, 2000) tousleep_range(1000, 1050)
- remove __func__ from dev_err
- return err number when get clk failed
- remove ADDR_ADJ define
- use devm_clk_get(&pdev->dev, "tcpdcore")
- add extcon node description
- add #sound-dai-cells description
- use extcon API
- use hdmi-codec for the DP Asoc
- do not initialize the "ret"
- printk a err log when drm_of_encoder_active_endpoint_id
- modify the dclk pin_pol to a single line
Chris Zhong (5):
extcon: Add Type-C and DP support
Documentation: bindings: add dt doc for Rockchip USB Type-C PHY
phy: Add USB Type-C PHY driver for rk3399
Documentation: bindings: add dt documentation for cdn DP controller
drm/rockchip: cdn-dp: add cdn DP support for rk3399
.../bindings/display/rockchip/cdn-dp-rockchip.txt | 67 ++
.../devicetree/bindings/phy/phy-rockchip-typec.txt | 77 ++
drivers/extcon/extcon.c | 28 +
drivers/gpu/drm/rockchip/Kconfig | 9 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/cdn-dp-core.c | 761 ++++++++++++++++
drivers/gpu/drm/rockchip/cdn-dp-core.h | 113 +++
drivers/gpu/drm/rockchip/cdn-dp-reg.c | 740 ++++++++++++++++
drivers/gpu/drm/rockchip/cdn-dp-reg.h | 409 +++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 2 +
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 2 +
drivers/phy/Kconfig | 9 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-typec.c | 974 +++++++++++++++++++++
include/linux/extcon.h | 13 +
16 files changed, 3211 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-core.c
create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-core.h
create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.c
create mode 100644 drivers/gpu/drm/rockchip/cdn-dp-reg.h
create mode 100644 drivers/phy/phy-rockchip-typec.c
--
2.6.3
More information about the dri-devel
mailing list