[PATCH v3 0/2] Toshiba TC358767 eDP bridge driver

[Philipp Zabel]

Hi,

this patchset adds DT binding docs and a drm_bridge driver for the
Toshiba TC358767 eDP bridge, currently supporting only 24-bit DPI input
and control via I2C. The chip is also capable to act as a DSI sink, but
the driver doesn't support that yet.
It is based on Andrey's initial driver, which can be found at
https://github.com/CogentEmbedded/linux-zodiac.git, commit 4abb1d0a9a1c
("drm/i2c: tc358767 eDP encoder initial commit"). I have turned it into
a drm_bridge driver and changed it to use regmap and the drm_dp helpers.

Changes since v2:
 - Let DRM_TOSHIBA_TC358767 depend on OF
 - Add a module parameter "test" to enable the color bar test pattern
 - Provide mode clock to tc_pxl_pll_en
 - Remove now otherwise unused struct tc_data members "pll_clk",
   "pll_clk_real" and "test_pattern".

regards
Philipp

Andrey Gusakov (1):
  drm/bridge: tc358767: Add DPI to eDP bridge driver

Philipp Zabel (1):
  dt-bindings: tc358767: add DT documentation

 .../bindings/display/bridge/toshiba,tc358767.txt   |   51 +
 drivers/gpu/drm/bridge/Kconfig                     |    9 +
 drivers/gpu/drm/bridge/Makefile                    |    1 +
 drivers/gpu/drm/bridge/tc358767.c                  | 1413 ++++++++++++++++++++
 4 files changed, 1474 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
 create mode 100644 drivers/gpu/drm/bridge/tc358767.c

-- 
2.8.1