[PATCH v4 3/4] drm/bridge: analogix_dp: add the PSR function support
Yakir Yang
ykk at rock-chips.com
Fri Jul 15 09:32:25 UTC 2016
Sean,
On 07/14/2016 11:23 PM, Sean Paul wrote:
> On Thu, Jul 14, 2016 at 12:15:53PM +0800, Yakir Yang wrote:
>> The full name of PSR is Panel Self Refresh, panel device could refresh
>> itself with the hardware framebuffer in panel, this would make lots of
>> sense to save the power consumption.
>>
>> This patch have exported two symbols for platform driver to implement
>> the PSR function in hardware side:
>> - analogix_dp_active_psr()
>> - analogix_dp_inactive_psr()
>>
>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> ---
>> Changes in v4:
>> - Downgrade the PSR version print message to debug level. (Sean)
>> - Return 'void' instead of 'int' in analogix_dp_enable_sink_psr(). (Sean)
>> - Delete the unused read dpcd operations in analogix_dp_enable_sink_psr(). (Sean)
>> - Delete the arbitrary usleep_range in analogix_dp_enable_psr_crc. (Sean).
>> - Clean up the hardcoded values in analogix_dp_send_psr_spd(). (Sean)
>> - Rename "active/inactive" to "enable/disable". (Sean, Dominik)
>> - Keep set the PSR_VID_CRC_FLUSH gate in analogix_dp_enable_psr_crc().
>>
>> Changes in v3:
>> - split analogix_dp_enable_psr(), make it more clearly
>> analogix_dp_detect_sink_psr()
>> analogix_dp_enable_sink_psr()
>> - remove some nosie register setting comments
>>
>> Changes in v2:
>> - introduce in v2, splite the common Analogix DP changes out
>>
>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 60 ++++++++++++++++++++++
>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 4 ++
>> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 49 ++++++++++++++++++
>> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 28 ++++++++++
>> include/drm/bridge/analogix_dp.h | 3 ++
>> 5 files changed, 144 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> index 32715da..1fec91a 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>> @@ -97,6 +97,62 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
>> return 0;
>> }
>>
>> +int analogix_dp_enable_psr(struct device *dev)
>> +{
>> + struct analogix_dp_device *dp = dev_get_drvdata(dev);
>> +
>> + if (!dp->psr_support)
>> + return -EINVAL;
>> +
>> + analogix_dp_send_psr_spd(dp, EDP_VSC_PSR_STATE_ACTIVE |
>> + EDP_VSC_PSR_CRC_VALUES_VALID);
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(analogix_dp_enable_psr);
>> +
>> +int analogix_dp_disable_psr(struct device *dev)
>> +{
>> + struct analogix_dp_device *dp = dev_get_drvdata(dev);
>> +
>> + if (!dp->psr_support)
>> + return -EINVAL;
>> +
>> + analogix_dp_send_psr_spd(dp, 0);
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(analogix_dp_disable_psr);
>> +
>> +static bool analogix_dp_detect_sink_psr(struct analogix_dp_device *dp)
>> +{
>> + unsigned char psr_version;
>> +
>> + analogix_dp_read_byte_from_dpcd(dp, DP_PSR_SUPPORT, &psr_version);
>> + dev_dbg(dp->dev, "Panel PSR version : %x\n", psr_version);
>> +
>> + return (psr_version & DP_PSR_IS_SUPPORTED) ? true : false;
>> +}
>> +
>> +static void analogix_dp_enable_sink_psr(struct analogix_dp_device *dp)
>> +{
>> + unsigned char psr_en;
>> +
>> + /* Disable psr function */
>> + analogix_dp_read_byte_from_dpcd(dp, DP_PSR_EN_CFG, &psr_en);
>> + psr_en &= ~DP_PSR_ENABLE;
>> + analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
>> +
>> + /* Main-Link transmitter remains active during PSR active states */
>> + psr_en = DP_PSR_MAIN_LINK_ACTIVE | DP_PSR_CRC_VERIFICATION;
>> + analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
>> +
>> + /* Enable psr function */
>> + psr_en = DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE |
>> + DP_PSR_CRC_VERIFICATION;
>> + analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
>> +
>> + analogix_dp_enable_psr_crc(dp);
>> +}
>> +
>> static unsigned char analogix_dp_calc_edid_check_sum(unsigned char *edid_data)
>> {
>> int i;
>> @@ -921,6 +977,10 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
>>
>> /* Enable video */
>> analogix_dp_start_video(dp);
>> +
>> + dp->psr_support = analogix_dp_detect_sink_psr(dp);
>> + if (dp->psr_support)
>> + analogix_dp_enable_sink_psr(dp);
>> }
>>
>> int analogix_dp_get_modes(struct drm_connector *connector)
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> index b456380..6ca5dde 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>> @@ -177,6 +177,7 @@ struct analogix_dp_device {
>> int hpd_gpio;
>> bool force_hpd;
>> unsigned char edid[EDID_BLOCK_LENGTH * 2];
>> + bool psr_support;
>>
>> struct analogix_dp_plat_data *plat_data;
>> };
>> @@ -278,4 +279,7 @@ int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp);
>> void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp);
>> void analogix_dp_enable_scrambling(struct analogix_dp_device *dp);
>> void analogix_dp_disable_scrambling(struct analogix_dp_device *dp);
>> +void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp);
>> +void analogix_dp_send_psr_spd(struct analogix_dp_device *dp, int db1);
>> +
>> #endif /* _ANALOGIX_DP_CORE_H */
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
>> index 48030f0..26446ae 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
>> @@ -26,6 +26,9 @@
>> #define COMMON_INT_MASK_4 (HOTPLUG_CHG | HPD_LOST | PLUG)
>> #define INT_STA_MASK INT_HPD
>>
>> +static u32 psr_spd_hbx[] = { 0x00, 0x07, 0x02, 0x08 };
>> +static u32 psr_spd_pbx[] = { 0x00, 0x16, 0xCE, 0x5D };
> These need to be const. Can you also please add a comment explaining where you
> got the values from?
A, after reading the eDP 1.4 spec, HBx values are come from spec, and I
also found there is no need to configure the PBx registers (cause spec
haven't mentioned it, and my panel still works without it).
*
HB2: Revision Number*
Support for 04h and 05h values added in eDP v1.4a.
01h = VSC SDP supports only 3D stereo.
02h = 3D stereo + PSR.
03h = 3D stereo + PSR2.
04h = 3D stereo + PSR/PSR2 + Y-coordinate.
05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry
Format indication.
*HB3: Number of Valid Data Bytes*
01h = VSC SDP supports only 3D stereo (HB2 = 01h).
08h = VSC SDP supporting 3D stereo + PSR (HB2 = 02h).
0Ch = VSC SDP supporting 3D stereo + PSR2 (HB2 = 03h), without
Y-coordinate of first scan
line in the SU region.
0Eh = VSC SDP supporting 3D stereo + PSR2 (HB2 = 04h), with Y-coordinate
of first scan line
in the SU region.
13h = VSC SDP supporting 3D stereo, + PSR2, + Pixel Encoding/Colorimetry
Format indication (HB2 = 05h).
>> +
>> void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable)
>> {
>> u32 reg;
>> @@ -1322,3 +1325,49 @@ void analogix_dp_disable_scrambling(struct analogix_dp_device *dp)
>> reg |= SCRAMBLING_DISABLE;
>> writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
>> }
>> +
>> +void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp)
>> +{
>> + writel(PSR_VID_CRC_FLUSH | PSR_VID_CRC_ENABLE,
>> + dp->reg_base + ANALOGIX_DP_CRC_CON);
>> +}
>> +
And I found I need to remove the PSR_VID_CRC_FLUSH enable flag, cause
it would caused PSR failed.
Thanks,
- Yakir
>> +void analogix_dp_send_psr_spd(struct analogix_dp_device *dp, int db1)
>> +{
>> + unsigned int val;
>> + unsigned int i;
>> +
>> + /* don't send info frame */
>> + val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
>> + val &= ~IF_EN;
>> + writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
>> +
>> + /* configure single frame update mode */
>> + writel(PSR_FRAME_UP_TYPE_BURST | PSR_CRC_SEL_HARDWARE,
>> + dp->reg_base + ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL);
>> +
>> + /* configure VSC HB0~HB3 and PB0~PB3 */
>> + for (i = 0; i < 4; i++)
>> + writel(psr_spd_hbx[i], dp->reg_base + ANALOGIX_DP_SPD_HB + i*4);
>> + for (i = 0; i < 4; i++)
>> + writel(psr_spd_pbx[i], dp->reg_base + ANALOGIX_DP_SPD_PB + i*4);
>> +
>> + /* configure DB0 / DB1 values */
>> + writel(0x0, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB0);
>> + writel(db1, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB1);
>> +
>> + /* set reuse spd inforframe */
>> + val = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
>> + val |= REUSE_SPD_EN;
>> + writel(val, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
>> +
>> + /* mark info frame update */
>> + val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
>> + val = (val | IF_UP) & ~IF_EN;
>> + writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
>> +
>> + /* send info frame */
>> + val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
>> + val |= IF_EN;
>> + writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
>> +}
>> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
>> index cdcc6c5..fd232b2 100644
>> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
>> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
>> @@ -22,6 +22,8 @@
>> #define ANALOGIX_DP_VIDEO_CTL_8 0x3C
>> #define ANALOGIX_DP_VIDEO_CTL_10 0x44
>>
>> +#define ANALOGIX_DP_SPDIF_AUDIO_CTL_0 0xD8
>> +
>> #define ANALOGIX_DP_PLL_REG_1 0xfc
>> #define ANALOGIX_DP_PLL_REG_2 0x9e4
>> #define ANALOGIX_DP_PLL_REG_3 0x9e8
>> @@ -30,6 +32,15 @@
>>
>> #define ANALOGIX_DP_PD 0x12c
>>
>> +#define ANALOGIX_DP_IF_TYPE 0x244
>> +#define ANALOGIX_DP_IF_PKT_DB1 0x254
>> +#define ANALOGIX_DP_IF_PKT_DB2 0x258
>> +#define ANALOGIX_DP_SPD_HB 0x2F8
>> +#define ANALOGIX_DP_SPD_PB 0x308
>> +#define ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL 0x318
>> +#define ANALOGIX_DP_VSC_SHADOW_DB0 0x31C
>> +#define ANALOGIX_DP_VSC_SHADOW_DB1 0x320
>> +
>> #define ANALOGIX_DP_LANE_MAP 0x35C
>>
>> #define ANALOGIX_DP_ANALOG_CTL_1 0x370
>> @@ -103,6 +114,8 @@
>>
>> #define ANALOGIX_DP_SOC_GENERAL_CTL 0x800
>>
>> +#define ANALOGIX_DP_CRC_CON 0x890
>> +
>> /* ANALOGIX_DP_TX_SW_RESET */
>> #define RESET_DP_TX (0x1 << 0)
>>
>> @@ -151,6 +164,7 @@
>> #define VID_CHK_UPDATE_TYPE_SHIFT (4)
>> #define VID_CHK_UPDATE_TYPE_1 (0x1 << 4)
>> #define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
>> +#define REUSE_SPD_EN (0x1 << 3)
>>
>> /* ANALOGIX_DP_VIDEO_CTL_8 */
>> #define VID_HRES_TH(x) (((x) & 0xf) << 4)
>> @@ -167,6 +181,12 @@
>> #define REF_CLK_27M (0x0 << 0)
>> #define REF_CLK_MASK (0x1 << 0)
>>
>> +/* ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL */
>> +#define PSR_FRAME_UP_TYPE_BURST (0x1 << 0)
>> +#define PSR_FRAME_UP_TYPE_SINGLE (0x0 << 0)
>> +#define PSR_CRC_SEL_HARDWARE (0x1 << 1)
>> +#define PSR_CRC_SEL_MANUALLY (0x0 << 1)
>> +
>> /* ANALOGIX_DP_LANE_MAP */
>> #define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
>> #define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
>> @@ -376,4 +396,12 @@
>> #define VIDEO_MODE_SLAVE_MODE (0x1 << 0)
>> #define VIDEO_MODE_MASTER_MODE (0x0 << 0)
>>
>> +/* ANALOGIX_DP_PKT_SEND_CTL */
>> +#define IF_UP (0x1 << 4)
>> +#define IF_EN (0x1 << 0)
>> +
>> +/* ANALOGIX_DP_CRC_CON */
>> +#define PSR_VID_CRC_FLUSH (0x1 << 2)
>> +#define PSR_VID_CRC_ENABLE (0x1 << 0)
>> +
>> #endif /* _ANALOGIX_DP_REG_H */
>> diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
>> index 261b86d..9cd8838 100644
>> --- a/include/drm/bridge/analogix_dp.h
>> +++ b/include/drm/bridge/analogix_dp.h
>> @@ -38,6 +38,9 @@ struct analogix_dp_plat_data {
>> struct drm_connector *);
>> };
>>
>> +int analogix_dp_enable_psr(struct device *dev);
>> +int analogix_dp_disable_psr(struct device *dev);
>> +
>> int analogix_dp_resume(struct device *dev);
>> int analogix_dp_suspend(struct device *dev);
>>
>> --
>> 1.9.1
>>
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20160715/9c5a98ff/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: edgabbhg.png
Type: image/png
Size: 47424 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20160715/9c5a98ff/attachment-0001.png>
More information about the dri-devel
mailing list