[PATCH v4 6/8] drm/mediatek: add dsi transfer function
YT Shen
yt.shen at mediatek.com
Fri Jul 15 10:07:52 UTC 2016
From: shaoming chen <shaoming.chen at mediatek.com>
add dsi read/write commands for transfer function
Signed-off-by: shaoming chen <shaoming.chen at mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 322 ++++++++++++++++++++++++++++++++++++
1 file changed, 322 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index de5ad7f..1f99894 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -24,6 +24,7 @@
#include <linux/of_graph.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <video/mipi_display.h>
#include <video/videomode.h>
#include "mtk_drm_ddp_comp.h"
@@ -80,8 +81,16 @@
#define DSI_HBP_WC 0x54
#define DSI_HFP_WC 0x58
+#define DSI_CMDQ_SIZE 0x60
+#define CMDQ_SIZE 0x3f
+
#define DSI_HSTX_CKL_WC 0x64
+#define DSI_RX_DATA0 0x74
+#define DSI_RX_DATA1 0x78
+#define DSI_RX_DATA2 0x7c
+#define DSI_RX_DATA3 0x80
+
#define DSI_RACK 0x84
#define RACK BIT(0)
@@ -117,8 +126,25 @@
#define CLK_HS_POST (0xff << 8)
#define CLK_HS_EXIT (0xff << 16)
+#define DSI_CMDQ0 0x180
+
#define NS_TO_CYCLE(n, c) ((n) / (c) + (((n) % (c)) ? 1 : 0))
+#define MTK_DSI_HOST_IS_READ(type) \
+ ((type == MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM) || \
+ (type == MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM) || \
+ (type == MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM) || \
+ (type == MIPI_DSI_DCS_READ))
+
+#define MTK_DSI_HOST_IS_WRITE(type) \
+ ((type == MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM) || \
+ (type == MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM) || \
+ (type == MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM) || \
+ (type == MIPI_DSI_DCS_SHORT_WRITE) || \
+ (type == MIPI_DSI_DCS_SHORT_WRITE_PARAM) || \
+ (type == MIPI_DSI_GENERIC_LONG_WRITE) || \
+ (type == MIPI_DSI_DCS_LONG_WRITE))
+
struct phy;
struct mtk_dsi {
@@ -148,6 +174,38 @@ struct mtk_dsi {
int irq_num, irq_data;
};
+struct dsi_cmd_t0 {
+ u8 config;
+ u8 type;
+ u8 data0;
+ u8 data1;
+};
+
+struct dsi_cmd_t2 {
+ u8 config;
+ u8 type;
+ u16 wc16;
+ u8 *pdata;
+};
+
+struct dsi_rx_data {
+ u8 byte0;
+ u8 byte1;
+ u8 byte2;
+ u8 byte3;
+};
+
+struct dsi_tx_cmdq {
+ u8 byte0;
+ u8 byte1;
+ u8 byte2;
+ u8 byte3;
+};
+
+struct dsi_tx_cmdq_regs {
+ struct dsi_tx_cmdq data[128];
+};
+
enum {
DSI_INT_SLEEPOUT_DONE_FLAG = BIT(6),
DSI_INT_VM_CMD_DONE_FLAG = BIT(5),
@@ -858,9 +916,273 @@ static int mtk_dsi_host_detach(struct mipi_dsi_host *host,
return 0;
}
+static void mtk_dsi_set_cmdq(void __iomem *reg, u32 mask, u32 data)
+{
+ u32 temp = readl(reg);
+
+ writel((temp & ~mask) | (data & mask), reg);
+}
+
+static void mtk_dsi_wait_for_idle(struct mtk_dsi *dsi)
+{
+ u32 timeout_ms = 500000; /* total 1s ~ 2s timeout */
+
+ while (timeout_ms--) {
+ if (!(readl(dsi->regs + DSI_INTSTA) & DSI_BUSY))
+ break;
+
+ usleep_range(2, 4);
+ }
+
+ if (timeout_ms == 0) {
+ dev_info(dsi->dev, "polling dsi wait not busy timeout!\n");
+
+ mtk_dsi_enable(dsi);
+ mtk_dsi_reset_engine(dsi);
+ }
+}
+
+static ssize_t mtk_dsi_host_read_cmd(struct mtk_dsi *dsi,
+ const struct mipi_dsi_msg *msg)
+{
+ u8 max_try_count = 5;
+ u32 recv_data_cnt, tmp_val;
+ u32 recv_data0, recv_data1, recv_data2, recv_data3;
+ struct dsi_rx_data read_data0, read_data1, read_data2, read_data3;
+ struct dsi_cmd_t0 t0;
+ s32 ret;
+
+ u8 *buffer = msg->rx_buf;
+ u8 buffer_size = msg->rx_len;
+ u8 packet_type;
+
+ if (readl(dsi->regs + DSI_MODE_CTRL) & 0x03) {
+ dev_info(dsi->dev, "dsi engine is not command mode\n");
+ return -1;
+ }
+
+ if (!buffer) {
+ dev_info(dsi->dev, "dsi receive buffer size may be NULL\n");
+ return -1;
+ }
+
+ do {
+ if (max_try_count == 0) {
+ dev_info(dsi->dev, "dsi engine read counter has been maxinum\n");
+ return -1;
+ }
+
+ max_try_count--;
+ recv_data_cnt = 0;
+
+ mtk_dsi_wait_for_idle(dsi);
+
+ t0.config = 0x04;
+ t0.data0 = *((u8 *)(msg->tx_buf));
+
+ if (buffer_size < 0x3)
+ t0.type = MIPI_DSI_DCS_READ;
+ else
+ t0.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
+
+ t0.data1 = 0;
+
+ tmp_val = (t0.data1 << 24) | (t0.data0 << 16) | (t0.type << 8) |
+ t0.config;
+
+ writel(tmp_val, dsi->regs + DSI_CMDQ0);
+ mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, 1);
+
+ mtk_dsi_mask(dsi, DSI_RACK, RACK, RACK);
+ mtk_dsi_mask(dsi, DSI_INTSTA, LPRX_RD_RDY_INT_FLAG,
+ ~LPRX_RD_RDY_INT_FLAG);
+ mtk_dsi_mask(dsi, DSI_INTSTA, CMD_DONE_INT_FLAG,
+ ~CMD_DONE_INT_FLAG);
+ mtk_dsi_mask(dsi, DSI_INTEN, DSI_INT_LPRX_RD_RDY_FLAG,
+ DSI_INT_LPRX_RD_RDY_FLAG);
+ mtk_dsi_mask(dsi, DSI_INTEN, DSI_INT_CMD_DONE_FLAG,
+ DSI_INT_CMD_DONE_FLAG);
+
+ mtk_dsi_start(dsi);
+
+ dev_info(dsi->dev, "Start polling DSI read ready!!!\n");
+
+ /* 2s timeout*/
+ ret = mtk_dsi_wait_for_irq_timeout(dsi,
+ DSI_INT_LPRX_RD_RDY_FLAG,
+ 2000);
+ if (ret) {
+ dev_info(dsi->dev, "Polling DSI read ready timeout!!!\n");
+
+ mtk_dsi_enable(dsi);
+ mtk_dsi_reset_engine(dsi);
+
+ return ret;
+ }
+
+ dev_info(dsi->dev, "End polling DSI read ready!!!\n");
+
+ mtk_dsi_mask(dsi, DSI_RACK, RACK, RACK);
+ mtk_dsi_mask(dsi, DSI_INTSTA, LPRX_RD_RDY_INT_FLAG,
+ ~LPRX_RD_RDY_INT_FLAG);
+
+ recv_data0 = readl(dsi->regs + DSI_RX_DATA0);
+ recv_data1 = readl(dsi->regs + DSI_RX_DATA1);
+ recv_data2 = readl(dsi->regs + DSI_RX_DATA2);
+ recv_data3 = readl(dsi->regs + DSI_RX_DATA3);
+
+ read_data0 = *((struct dsi_rx_data *)(&recv_data0));
+ read_data1 = *((struct dsi_rx_data *)(&recv_data1));
+ read_data2 = *((struct dsi_rx_data *)(&recv_data2));
+ read_data3 = *((struct dsi_rx_data *)(&recv_data3));
+
+ ret = readl(dsi->regs + DSI_CMDQ_SIZE);
+ dev_info(dsi->dev, "DSI_CMDQ_SIZE : 0x%x\n", ret & CMDQ_SIZE);
+
+ ret = readl(dsi->regs + DSI_CMDQ0);
+ dev_info(dsi->dev, "DSI_CMDQ_DATA0 : 0x%x\n",
+ ret & 0xff);
+ dev_info(dsi->dev, "DSI_CMDQ_DATA1 : 0x%x\n",
+ (ret >> 8) & 0xff);
+ dev_info(dsi->dev, "DSI_CMDQ_DATA2 : 0x%x\n",
+ (ret >> 16) & 0xff);
+ dev_info(dsi->dev, "DSI_CMDQ_DATA3 : 0x%x\n",
+ (ret >> 24) & 0xff);
+
+ dev_info(dsi->dev, "DSI_RX_DATA0: 0x%x\n", recv_data0);
+ dev_info(dsi->dev, "DSI_RX_DATA1: 0x%x\n", recv_data1);
+ dev_info(dsi->dev, "DSI_RX_DATA2: 0x%x\n", recv_data2);
+ dev_info(dsi->dev, "DSI_RX_DATA3: 0x%x\n", recv_data3);
+
+ dev_info(dsi->dev, "read_data0: %x,%x,%x,%x\n",
+ read_data0.byte0, read_data0.byte1, read_data0.byte2,
+ read_data0.byte3);
+ dev_info(dsi->dev, "read_data1: %x,%x,%x,%x\n",
+ read_data1.byte0, read_data1.byte1, read_data1.byte2,
+ read_data1.byte3);
+ dev_info(dsi->dev, "read_data2: %x,%x,%x,%x\n",
+ read_data2.byte0, read_data2.byte1, read_data2.byte2,
+ read_data2.byte3);
+ dev_info(dsi->dev, "read_data3: %x,%x,%x,%x\n",
+ read_data3.byte0, read_data3.byte1, read_data3.byte2,
+ read_data3.byte3);
+
+ packet_type = read_data0.byte0;
+ dev_info(dsi->dev, "DSI read packet_type is 0x%x\n",
+ packet_type);
+
+ if (packet_type == 0x1a || packet_type == 0x1c) {
+ void *read_tmp = (void *)&recv_data1;
+
+ recv_data_cnt = read_data0.byte1 +
+ read_data0.byte2 * 16;
+ if (recv_data_cnt > 10)
+ recv_data_cnt = 10;
+
+ if (recv_data_cnt > buffer_size)
+ recv_data_cnt = buffer_size;
+
+ memcpy(buffer, read_tmp, recv_data_cnt);
+ } else {
+ /* short packet */
+ recv_data_cnt = 2;
+ if (recv_data_cnt > buffer_size)
+ recv_data_cnt = buffer_size;
+
+ memcpy(buffer, &read_data0.byte1, 2);
+ }
+ } while (packet_type != 0x1c && packet_type != 0x21 &&
+ packet_type != 0x22 && packet_type != 0x1a);
+
+ dev_info(dsi->dev, "dsi get %d byte data from the panel address(0x%x)\n",
+ recv_data_cnt, *((u8 *)(msg->tx_buf)));
+
+ return recv_data_cnt;
+}
+
+static ssize_t mtk_dsi_host_write_cmd(struct mtk_dsi *dsi,
+ const struct mipi_dsi_msg *msg)
+{
+ u32 i;
+ u32 goto_addr, mask_para, set_para, reg_val;
+ void __iomem *cmdq_reg;
+ struct dsi_cmd_t0 t0;
+ struct dsi_cmd_t2 t2;
+ const char *tx_buf = msg->tx_buf;
+ struct dsi_tx_cmdq_regs *dsi_cmd_reg;
+
+ dsi_cmd_reg = (struct dsi_tx_cmdq_regs *)(dsi->regs + DSI_CMDQ0);
+
+ mtk_dsi_wait_for_idle(dsi);
+
+ if (msg->tx_len > 2) {
+ t2.config = 2;
+ t2.type = msg->type;
+ t2.wc16 = msg->tx_len;
+
+ reg_val = (t2.wc16 << 16) | (t2.type << 8) | t2.config;
+
+ writel(reg_val, &dsi_cmd_reg->data[0]);
+
+ goto_addr = (u32)(&dsi_cmd_reg->data[1].byte0);
+ mask_para = (0xff << ((goto_addr & 0x3) * 8));
+ set_para = (tx_buf[0] << ((goto_addr & 0x3) * 8));
+ cmdq_reg = (void __iomem *)(goto_addr & (~0x3));
+ mtk_dsi_set_cmdq(cmdq_reg, mask_para, set_para);
+
+ for (i = 1; i < msg->tx_len; i++) {
+ goto_addr = (u32)(&dsi_cmd_reg->data[1].byte1) + i - 1;
+ mask_para = (0xff << ((goto_addr & 0x3) * 8));
+ set_para = (tx_buf[i] << ((goto_addr & 0x3) * 8));
+ cmdq_reg = (void __iomem *)(goto_addr & (~0x3));
+ mtk_dsi_set_cmdq(cmdq_reg, mask_para, set_para);
+ }
+
+ mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE,
+ 2 + (msg->tx_len - 1) / 4);
+ } else {
+ t0.config = 0;
+ t0.data0 = tx_buf[0];
+ if (msg->tx_len == 2) {
+ t0.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
+ t0.data1 = tx_buf[1];
+ } else {
+ t0.type = MIPI_DSI_DCS_SHORT_WRITE;
+ t0.data1 = 0;
+ }
+
+ reg_val = (t0.data1 << 24) | (t0.data0 << 16) | (t0.type << 8) |
+ t0.config;
+
+ writel(reg_val, &dsi_cmd_reg->data[0]);
+ mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, 1);
+ }
+
+ mtk_dsi_start(dsi);
+ mtk_dsi_wait_for_idle(dsi);
+
+ return 0;
+}
+
+static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg)
+{
+ struct mtk_dsi *dsi = host_to_dsi(host);
+ u8 type = msg->type;
+ ssize_t ret = 0;
+
+ if (MTK_DSI_HOST_IS_READ(type))
+ ret = mtk_dsi_host_read_cmd(dsi, msg);
+ else if (MTK_DSI_HOST_IS_WRITE(type))
+ ret = mtk_dsi_host_write_cmd(dsi, msg);
+
+ return ret;
+}
+
static const struct mipi_dsi_host_ops mtk_dsi_ops = {
.attach = mtk_dsi_host_attach,
.detach = mtk_dsi_host_detach,
+ .transfer = mtk_dsi_host_transfer,
};
static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
--
1.7.9.5
More information about the dri-devel
mailing list