[PATCH 4/7] drm/i915: Use the per-plane rotation property
Joonas Lahtinen
joonas.lahtinen at linux.intel.com
Wed Jul 20 13:57:32 UTC 2016
On ke, 2016-07-20 at 16:18 +0300, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> On certain platforms not all planes support the same set of
> rotations/reflections, so let's use the per-plane property
> for this.
>
> This is already a problem on SKL when we use the legay cursor plane
> as it only supports 0|180 whereas the universal planes support
> 0|90|180|270, and it will be a problem on CHV soon.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 51 +++++++++++++++++++-----------------
> drivers/gpu/drm/i915/intel_drv.h | 4 +--
> drivers/gpu/drm/i915/intel_sprite.c | 12 ++++++++-
> 3 files changed, 40 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 08b9f9a19df0..93ecb259c5ce 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -14217,6 +14217,7 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
> struct intel_plane *primary = NULL;
> struct intel_plane_state *state = NULL;
> const uint32_t *intel_primary_formats;
> + unsigned int supported_rotations;
> unsigned int num_formats;
> int ret;
>
> @@ -14289,8 +14290,19 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
> if (ret)
> goto fail;
>
> + if (INTEL_INFO(dev)->gen >= 9) {
> + supported_rotations =
> + BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_90) |
> + BIT(DRM_ROTATE_180) | BIT(DRM_ROTATE_270);
> + } else if (INTEL_INFO(dev)->gen >= 4) {
> + supported_rotations =
> + BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_180);
> + } else {
> + supported_rotations = BIT(DRM_ROTATE_0);
> + }
> +
Might this be more informative if it was;
supported_rotations = BIT(DRM_ROTATE_0);
if (gen >= 4)
supported_rotations |= BIT(DRM_ROTATE_180);
Then you could exclude too, for special platforms.
Also, use INTEL_GEN()
> if (INTEL_INFO(dev)->gen >= 4)
> - intel_create_rotation_property(dev, primary);
> + intel_create_rotation_property(primary, supported_rotations);
>
> drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
>
> @@ -14303,22 +14315,20 @@ fail:
> return NULL;
> }
>
> -void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *plane)
> +void intel_create_rotation_property(struct intel_plane *plane,
> + unsigned int supported_rotations)
> {
> - if (!dev->mode_config.rotation_property) {
> - unsigned long flags = BIT(DRM_ROTATE_0) |
> - BIT(DRM_ROTATE_180);
> + struct drm_device *dev = plane->base.dev;
>
> - if (INTEL_INFO(dev)->gen >= 9)
> - flags |= BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270);
> + if (!plane->base.rotation_property)
> + plane->base.rotation_property =
> + drm_mode_create_rotation_property(dev,
> + supported_rotations);
>
> - dev->mode_config.rotation_property =
> - drm_mode_create_rotation_property(dev, flags);
> - }
> - if (dev->mode_config.rotation_property)
> + if (plane->base.rotation_property)
> drm_object_attach_property(&plane->base.base,
> - dev->mode_config.rotation_property,
> - plane->base.state->rotation);
> + plane->base.rotation_property,
> + plane->base.state->rotation);
> }
>
> static int
> @@ -14449,17 +14459,10 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
> if (ret)
> goto fail;
>
> - if (INTEL_INFO(dev)->gen >= 4) {
> - if (!dev->mode_config.rotation_property)
> - dev->mode_config.rotation_property =
> - drm_mode_create_rotation_property(dev,
> - BIT(DRM_ROTATE_0) |
> - BIT(DRM_ROTATE_180));
> - if (dev->mode_config.rotation_property)
> - drm_object_attach_property(&cursor->base.base,
> - dev->mode_config.rotation_property,
> - state->base.rotation);
> - }
> + if (INTEL_INFO(dev)->gen >= 4)
INTEL_GEN() while touching it.
> + intel_create_rotation_property(cursor,
> + BIT(DRM_ROTATE_0) |
> + BIT(DRM_ROTATE_180));
>
> if (INTEL_INFO(dev)->gen >=9)
> state->scaler_id = -1;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 907a72cfdad3..2715aec979fc 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1255,8 +1255,8 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
> unsigned int intel_tile_height(const struct drm_i915_private *dev_priv,
> uint64_t fb_modifier, unsigned int cpp);
>
> -void intel_create_rotation_property(struct drm_device *dev,
> - struct intel_plane *plane);
> +void intel_create_rotation_property(struct intel_plane *plane,
> + unsigned int supported_rotations);
>
> void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
> enum pipe pipe);
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index cc6af1410d67..bc41c1bba04c 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -1046,6 +1046,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
> struct intel_plane_state *state = NULL;
> unsigned long possible_crtcs;
> const uint32_t *plane_formats;
> + unsigned int supported_rotations;
> int num_plane_formats;
> int ret;
>
> @@ -1121,6 +1122,15 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
> goto fail;
> }
>
> + if (INTEL_INFO(dev)->gen >= 9) {
> + supported_rotations =
> + BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_90) |
> + BIT(DRM_ROTATE_180) | BIT(DRM_ROTATE_270);
> + } else {
> + supported_rotations =
> + BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_180);
> + }
> +
Same here, I'd put the |='s in order so that new gens add features,
making easier to get a picture of what was added at which point.
Regards, Joonas
> intel_plane->pipe = pipe;
> intel_plane->plane = plane;
> intel_plane->frontbuffer_bit = INTEL_FRONTBUFFER_SPRITE(pipe, plane);
> @@ -1143,7 +1153,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
> if (ret)
> goto fail;
>
> - intel_create_rotation_property(dev, intel_plane);
> + intel_create_rotation_property(intel_plane, supported_rotations);
>
> drm_plane_helper_add(&intel_plane->base, &intel_plane_helper_funcs);
>
--
Joonas Lahtinen
Open Source Technology Center
Intel Corporation
More information about the dri-devel
mailing list