[PATCH] [linux-next] drm: Add a G200EH PCI id for HPE Proliant Gen9

[Masanari Iida]

I made mistake to type shane's e-mail address, so I will send version
2.  Sorry for the noise.
Masanari

On Thu, Jul 21, 2016 at 2:12 PM, Masanari Iida <standby24x7 at gmail.com> wrote:
> Boot the system without this entry generates following warning.
> fb: conflicting fb hw usage mgag200drmfb vs EFI VGA - removing generic driver
>
> After apply this patch, no more conflict message.
> fb: switching to mgag200drmfb from EFI VGA
>
> Compile and tested on DL360 Gen9 and it works both console and X.
>
> Signed-off-by: Masanari Iida <standby24x7 at gmail.com>
> Suggested-by: Shane Seymour <seymour.shane at hpe.com>
> ---
>  include/drm/drm_pciids.h | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
> index 8bc073d297db..3e16dfc2e08d 100644
> --- a/include/drm/drm_pciids.h
> +++ b/include/drm/drm_pciids.h
> @@ -743,6 +743,7 @@
>  #define mga_PCI_IDS \
>         {0x102b, 0x0520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \
>         {0x102b, 0x0521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \
> +       {0x102b, 0x0533, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \
>         {0x102b, 0x0525, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G400}, \
>         {0x102b, 0x2527, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G550}, \
>         {0, 0, 0}
> --
> 2.9.2.368.g08bb350
>