[PATCH v5 06/10] drm/mediatek: add dsi interrupt control

YT Shen yt.shen at mediatek.com
Thu Jul 28 09:28:00 UTC 2016


From: shaoming chen <shaoming.chen at mediatek.com>

add dsi interrupt control

Signed-off-by: shaoming chen <shaoming.chen at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c |   92 ++++++++++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index a9cf5a1..553443a 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -18,6 +18,7 @@
 #include <drm/drm_panel.h>
 #include <linux/clk.h>
 #include <linux/component.h>
+#include <linux/irq.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_graph.h>
@@ -29,6 +30,17 @@
 
 #define DSI_START		0x00
 
+#define DSI_INTEN		0x08
+
+#define DSI_INTSTA		0x0c
+#define LPRX_RD_RDY_INT_FLAG		BIT(0)
+#define CMD_DONE_INT_FLAG		BIT(1)
+#define TE_RDY_INT_FLAG			BIT(2)
+#define VM_DONE_INT_FLAG		BIT(3)
+#define EXT_TE_RDY_INT_FLAG		BIT(4)
+#define DSI_INT_ALL_BITS		0x7f
+#define DSI_BUSY			BIT(31)
+
 #define DSI_CON_CTRL		0x10
 #define DSI_RESET			BIT(0)
 #define DSI_EN				BIT(1)
@@ -71,6 +83,9 @@
 
 #define DSI_HSTX_CKL_WC		0x64
 
+#define DSI_RACK		0x84
+#define RACK				BIT(0)
+
 #define DSI_PHY_LCCON		0x104
 #define LC_HS_TX_EN			BIT(0)
 #define LC_ULPM_EN			BIT(1)
@@ -131,8 +146,13 @@ struct mtk_dsi {
 	struct videomode vm;
 	int refcount;
 	bool enabled;
+	int irq_data;
 };
 
+static wait_queue_head_t _dsi_cmd_done_wait_queue;
+static wait_queue_head_t _dsi_dcs_read_wait_queue;
+static wait_queue_head_t _dsi_wait_vm_done_queue;
+
 static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
 {
 	return container_of(e, struct mtk_dsi, encoder);
@@ -437,6 +457,55 @@ static void mtk_dsi_start(struct mtk_dsi *dsi)
 	writel(1, dsi->regs + DSI_START);
 }
 
+static void mtk_dsi_set_interrupt_enable(struct mtk_dsi *dsi)
+{
+	u32 inten = DSI_INT_ALL_BITS;
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO)
+		inten &= ~(TE_RDY_INT_FLAG | EXT_TE_RDY_INT_FLAG);
+
+	writel(inten, dsi->regs + DSI_INTEN);
+}
+
+static void mtk_dsi_irq_wakeup(struct mtk_dsi *dsi, u32 irq_bit)
+{
+	dsi->irq_data |= irq_bit;
+}
+
+static irqreturn_t mtk_dsi_irq(int irq, void *dev_id)
+{
+	struct mtk_dsi *dsi = dev_id;
+
+	u32 status, tmp;
+
+	status = readl(dsi->regs + DSI_INTSTA);
+
+	if (status & LPRX_RD_RDY_INT_FLAG) {
+		do {
+			mtk_dsi_mask(dsi, DSI_RACK, RACK, RACK);
+			tmp = readl(dsi->regs + DSI_INTSTA);
+		} while (tmp & DSI_BUSY);
+
+		mtk_dsi_mask(dsi, DSI_INTSTA, LPRX_RD_RDY_INT_FLAG, 0);
+		mtk_dsi_irq_wakeup(dsi, LPRX_RD_RDY_INT_FLAG);
+		wake_up_interruptible(&_dsi_dcs_read_wait_queue);
+	}
+
+	if (status & CMD_DONE_INT_FLAG) {
+		mtk_dsi_mask(dsi, DSI_INTSTA, CMD_DONE_INT_FLAG, 0);
+		mtk_dsi_irq_wakeup(dsi, CMD_DONE_INT_FLAG);
+		wake_up_interruptible(&_dsi_cmd_done_wait_queue);
+	}
+
+	if (status & VM_DONE_INT_FLAG) {
+		mtk_dsi_mask(dsi, DSI_INTSTA, VM_DONE_INT_FLAG, 0);
+		mtk_dsi_irq_wakeup(dsi, VM_DONE_INT_FLAG);
+		wake_up_interruptible(&_dsi_wait_vm_done_queue);
+	}
+
+	return IRQ_HANDLED;
+}
+
 static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
 {
 	if (WARN_ON(dsi->refcount == 0))
@@ -485,6 +554,7 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
 
 	mtk_dsi_ps_control_vact(dsi);
 	mtk_dsi_config_vdo_timing(dsi);
+	mtk_dsi_set_interrupt_enable(dsi);
 
 	mtk_dsi_set_mode(dsi);
 	mtk_dsi_clk_hs_mode(dsi, 1);
@@ -804,6 +874,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *remote_node, *endpoint;
 	struct resource *regs;
+	int irq_num;
 	int comp_id;
 	int ret;
 
@@ -880,8 +951,29 @@ static int mtk_dsi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	irq_num = platform_get_irq(pdev, 0);
+	if (irq_num < 0) {
+		dev_err(&pdev->dev, "failed to request dsi irq resource\n");
+		return -EPROBE_DEFER;
+	}
+
+	irq_set_status_flags(irq_num, IRQ_TYPE_LEVEL_LOW);
+	ret = devm_request_irq(&pdev->dev, irq_num, mtk_dsi_irq,
+			       IRQF_TRIGGER_LOW, dev_name(&pdev->dev), dsi);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request mediatek dsi irq\n");
+		return -EPROBE_DEFER;
+	}
+
+	dsi->irq_data = 0;
+	dev_info(dev, "dsi irq num is 0x%x\n", irq_num);
+
 	platform_set_drvdata(pdev, dsi);
 
+	init_waitqueue_head(&_dsi_cmd_done_wait_queue);
+	init_waitqueue_head(&_dsi_dcs_read_wait_queue);
+	init_waitqueue_head(&_dsi_wait_vm_done_queue);
+
 	return component_add(&pdev->dev, &mtk_dsi_component_ops);
 }
 
-- 
1.7.9.5



More information about the dri-devel mailing list