[RFC PATCH v1 1/6] rockchip: rockchip: add new clock-type for the ddrclk
hl
hl at rock-chips.com
Mon Jun 6 02:24:09 UTC 2016
Hi Shawn,
On 2016年06月03日 20:29, Shawn Lin wrote:
> Hi Lin,
>
> It looks good with only a few minor comments.
>
> On 2016/6/3 17:55, Lin Huang wrote:
>> On new rockchip platform(rk3399 etc), there have dcf controller to
>> do ddr frequency scaling, and this controller will implement in
>> arm-trust-firmware. We add a special clock-type to handle that.
>>
>> Signed-off-by: Lin Huang <hl at rock-chips.com>
>> ---
>> Changes in v1:
>> - None
>>
>> drivers/clk/rockchip/Makefile | 1 +
>> drivers/clk/rockchip/clk-ddr.c | 147
>> +++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/rockchip/clk.c | 9 +++
>> drivers/clk/rockchip/clk.h | 27 ++++++++
>> 4 files changed, 184 insertions(+)
>> create mode 100644 drivers/clk/rockchip/clk-ddr.c
>>
>> diff --git a/drivers/clk/rockchip/Makefile
>> b/drivers/clk/rockchip/Makefile
>> index f47a2fa..b5f2c8e 100644
>> --- a/drivers/clk/rockchip/Makefile
>> +++ b/drivers/clk/rockchip/Makefile
>> @@ -8,6 +8,7 @@ obj-y += clk-pll.o
>> obj-y += clk-cpu.o
>> obj-y += clk-inverter.o
>> obj-y += clk-mmc-phase.o
>> +obj-y += clk-ddr.o
>> obj-$(CONFIG_RESET_CONTROLLER) += softrst.o
>>
>> obj-y += clk-rk3036.o
>> diff --git a/drivers/clk/rockchip/clk-ddr.c
>> b/drivers/clk/rockchip/clk-ddr.c
>> new file mode 100644
>> index 0000000..5b6630d
>> --- /dev/null
>> +++ b/drivers/clk/rockchip/clk-ddr.c
>> @@ -0,0 +1,147 @@
>> +/*
>> + * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
>> + * Author: Lin Huang <hl at rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/of.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include "clk.h"
>> +
>
> alphabetical order would be better.
Okay, will fix next version, thank you.
>
>> +struct rockchip_ddrclk {
>> + struct clk_hw hw;
>> + void __iomem *reg_base;
>> + int mux_offset;
>> + int mux_shift;
>> + int mux_width;
>> + int mux_flag;
>> + int div_shift;
>> + int div_width;
>> + int div_flag;
>> + spinlock_t *lock;
>> +};
>> +
>> +#define to_rockchip_ddrclk_hw(hw) container_of(hw, struct
>> rockchip_ddrclk, hw)
>> +#define val_mask(width) ((1 << (width)) - 1)
>> +
>> +static int rockchip_ddrclk_set_rate(struct clk_hw *hw, unsigned long
>> drate,
>> + unsigned long prate)
>> +{
>> + struct rockchip_ddrclk *ddrclk = to_rockchip_ddrclk_hw(hw);
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(ddrclk->lock, flags);
>> +
>> + /* TODO: set ddr rate in bl31 */
>> +
>> + spin_unlock_irqrestore(ddrclk->lock, flags);
>> +
>
> What do you wanna protect here?
I am not sure for now, when i finish this function,
if there nothing need protect i will remove it. Thank you.
>
>> + return 0;
>> +}
>> +
>> +static unsigned long
>> +rockchip_ddrclk_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + struct rockchip_ddrclk *ddrclk = to_rockchip_ddrclk_hw(hw);
>> + int val;
>> +
>> + val = clk_readl(ddrclk->reg_base +
>> + ddrclk->mux_offset) >> ddrclk->div_shift;
>> + val &= val_mask(ddrclk->div_width);
>> +
>> + return DIV_ROUND_UP_ULL((u64)parent_rate, val + 1);
>> +}
>> +
>> +static long clk_ddrclk_round_rate(struct clk_hw *hw, unsigned long
>> rate,
>> + unsigned long *prate)
>> +{
>> + return rate;
>> +}
>> +
>> +static u8 rockchip_ddrclk_get_parent(struct clk_hw *hw)
>> +{
>> + struct rockchip_ddrclk *ddrclk = to_rockchip_ddrclk_hw(hw);
>> + int num_parents = clk_hw_get_num_parents(hw);
>> + u32 val;
>> +
>> + val = clk_readl(ddrclk->reg_base +
>> + ddrclk->mux_offset) >> ddrclk->mux_shift;
>> + val &= val_mask(ddrclk->mux_width);
>> +
>> + if (val >= num_parents)
>> + return -EINVAL;
>> +
>> + return val;
>> +}
>> +
>> +static const struct clk_ops rockchip_ddrclk_ops = {
>> + .recalc_rate = rockchip_ddrclk_recalc_rate,
>> + .set_rate = rockchip_ddrclk_set_rate,
>> + .round_rate = clk_ddrclk_round_rate,
>> + .get_parent = rockchip_ddrclk_get_parent,
>> +};
>> +
>> +struct clk *rockchip_clk_register_ddrclk(const char *name, int flags,
>> + const char *const *parent_names,
>> + u8 num_parents, int mux_offset,
>> + int mux_shift, int mux_width,
>> + int mux_flag, int div_shift,
>> + int div_width, int div_flag,
>> + void __iomem *reg_base,
>> + spinlock_t *lock)
>> +{
>> + struct rockchip_ddrclk *ddrclk;
>> + struct clk_init_data init;
>> + struct clk *clk;
>> + int ret;
>> +
>> + ddrclk = kzalloc(sizeof(*ddrclk), GFP_KERNEL);
>> + if (!ddrclk)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + init.name = name;
>> + init.parent_names = parent_names;
>> + init.num_parents = num_parents;
>> + init.ops = &rockchip_ddrclk_ops;
>> +
>> + init.flags = flags;
>> + init.flags |= CLK_SET_RATE_NO_REPARENT;
>> + init.flags |= CLK_GET_RATE_NOCACHE;
>
> can we combine these two?
>
>> +
>> + ddrclk->reg_base = reg_base;
>> + ddrclk->lock = lock;
>> + ddrclk->hw.init = &init;
>> + ddrclk->mux_offset = mux_offset;
>> + ddrclk->mux_shift = mux_shift;
>> + ddrclk->mux_width = mux_width;
>> + ddrclk->mux_flag = mux_flag;
>> + ddrclk->div_shift = div_shift;
>> + ddrclk->div_width = div_width;
>> + ddrclk->div_flag = div_flag;
>> +
>> + clk = clk_register(NULL, &ddrclk->hw);
>> + if (IS_ERR(clk)) {
>> + pr_err("%s: could not register ddrclk %s\n", __func__,
>> name);
>> + ret = PTR_ERR(clk);
>
> Why do you need PTR_ERR and then convert back again.
Yes, there is only one error for ret value, so i can return "NULL"
directly, thank you.
>
>> + goto free_ddrclk;
>> + }
>> +
>> + return clk;
>> +
>> +free_ddrclk:
>> + kfree(ddrclk);
>> + return ERR_PTR(ret);
>> +}
>> diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c
>> index 7ffd134..6ac1aa5 100644
>> --- a/drivers/clk/rockchip/clk.c
>> +++ b/drivers/clk/rockchip/clk.c
>> @@ -484,6 +484,15 @@ void __init rockchip_clk_register_branches(
>> list->gate_offset, list->gate_shift,
>> list->gate_flags, flags, &ctx->lock);
>> break;
>> + case branch_ddrc:
>> + clk = rockchip_clk_register_ddrclk(
>> + list->name, list->flags,
>> + list->parent_names, list->num_parents,
>> + list->muxdiv_offset, list->mux_shift,
>> + list->mux_width, list->mux_flags,
>> + list->div_shift, list->div_width,
>> + list->div_flags, ctx->reg_base, &ctx->lock);
>> + break;
>> }
>>
>> /* none of the cases above matched */
>> diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
>> index 2194ffa..4033fe4 100644
>> --- a/drivers/clk/rockchip/clk.h
>> +++ b/drivers/clk/rockchip/clk.h
>> @@ -281,6 +281,13 @@ struct clk *rockchip_clk_register_mmc(const char
>> *name,
>> const char *const *parent_names, u8 num_parents,
>> void __iomem *reg, int shift);
>>
>> +struct clk *rockchip_clk_register_ddrclk(const char *name, int flags,
>> + const char *const *parent_names, u8 num_parents,
>> + int mux_offset, int mux_shift, int mux_width,
>> + int mux_flag, int div_shift, int div_width,
>> + int div_flag, void __iomem *reg_base,
>> + spinlock_t *lock);
>> +
>> #define ROCKCHIP_INVERTER_HIWORD_MASK BIT(0)
>>
>> struct clk *rockchip_clk_register_inverter(const char *name,
>> @@ -299,6 +306,7 @@ enum rockchip_clk_branch_type {
>> branch_mmc,
>> branch_inverter,
>> branch_factor,
>> + branch_ddrc,
>> };
>>
>> struct rockchip_clk_branch {
>> @@ -488,6 +496,25 @@ struct rockchip_clk_branch {
>> .child = ch, \
>> }
>>
>> +#define COMPOSITE_DDRC(_id, cname, pnames, f, mo, ms, mw, mf, \
>> + ds, dw, df) \
>
> it seems a duplication exept for branch_type.
We just need this different branch_type, so we can add case in
rockchip_clk_register_branches() and call
rockchip_clk_register_ddrclk().
>
>> + { \
>> + .id = _id, \
>> + .branch_type = branch_ddrc, \
>> + .name = cname, \
>> + .parent_names = pnames, \
>> + .num_parents = ARRAY_SIZE(pnames), \
>> + .flags = f, \
>> + .muxdiv_offset = mo, \
>> + .mux_shift = ms, \
>> + .mux_width = mw, \
>> + .mux_flags = mf, \
>> + .div_shift = ds, \
>> + .div_width = dw, \
>> + .div_flags = df, \
>> + .gate_offset = -1, \
>> + }
>> +
>> #define MUX(_id, cname, pnames, f, o, s, w, mf) \
>> { \
>> .id = _id, \
>>
>
>
--
Lin Huang
More information about the dri-devel
mailing list