[PATCH v3 09/15] drm: tilcdc: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Wed Jun 8 23:31:06 UTC 2016
The driver needs the number of bytes per pixel, not the bpp and depth
info meant for fbdev compatibility. Use the right API.
In the tilcdc_crtc_mode_set() function compute the hardware register
value directly from the pixel format instead of computing the number of
bits per pixels first.
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
Cc: Jyri Sarha <jsarha at ti.com>
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 79027b1c64d3..d63c7363dabc 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -65,15 +65,13 @@ static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct drm_gem_cma_object *gem;
- unsigned int depth, bpp;
dma_addr_t start, end;
- drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
gem = drm_fb_cma_get_gem_obj(fb, 0);
start = gem->paddr + fb->offsets[0] +
crtc->y * fb->pitches[0] +
- crtc->x * bpp / 8;
+ crtc->x * drm_format_plane_cpp(fb->pixel_format, 0);
end = start + (crtc->mode.vdisplay * fb->pitches[0]);
@@ -132,11 +130,12 @@ static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
static int tilcdc_verify_fb(struct drm_crtc *crtc, struct drm_framebuffer *fb)
{
struct drm_device *dev = crtc->dev;
- unsigned int depth, bpp;
+ unsigned int min_pitch;
- drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
+ min_pitch = crtc->mode.hdisplay
+ * drm_format_plane_cpp(fb->pixel_format, 0);
- if (fb->pitches[0] != crtc->mode.hdisplay * bpp / 8) {
+ if (fb->pitches[0] != min_pitch) {
dev_err(dev->dev,
"Invalid pitch: fb and crtc widths must be the same");
return -EINVAL;
@@ -401,16 +400,14 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc,
if (info->tft_alt_mode)
reg |= LCDC_TFT_ALT_ENABLE;
if (priv->rev == 2) {
- unsigned int depth, bpp;
-
- drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp);
- switch (bpp) {
- case 16:
+ switch (crtc->primary->fb->pixel_format) {
+ case DRM_FORMAT_RGB565:
break;
- case 32:
+ case DRM_FORMAT_XRGB8888:
+ case DRM_FORMAT_ARGB8888:
reg |= LCDC_V2_TFT_24BPP_UNPACK;
/* fallthrough */
- case 24:
+ case DRM_FORMAT_RGB888:
reg |= LCDC_V2_TFT_24BPP_MODE;
break;
default:
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list