[PATCH v3 09/15] drm: tilcdc: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()

Laurent Pinchart laurent.pinchart at ideasonboard.com
Wed Jun 8 23:32:13 UTC 2016


The driver needs the number of bytes per pixel, not the bpp and depth
info meant for fbdev compatibility. Use the right API.

In the tilcdc_crtc_mode_set() function compute the hardware register
value directly from the pixel format instead of computing the number of
bits per pixels first.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

Cc: Jyri Sarha <jsarha at ti.com>

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 79027b1c64d3..d63c7363dabc 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -65,15 +65,13 @@ static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
 	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct drm_gem_cma_object *gem;
-	unsigned int depth, bpp;
 	dma_addr_t start, end;
 
-	drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
 	gem = drm_fb_cma_get_gem_obj(fb, 0);
 
 	start = gem->paddr + fb->offsets[0] +
 		crtc->y * fb->pitches[0] +
-		crtc->x * bpp / 8;
+		crtc->x * drm_format_plane_cpp(fb->pixel_format, 0);
 
 	end = start + (crtc->mode.vdisplay * fb->pitches[0]);
 
@@ -132,11 +130,12 @@ static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
 static int tilcdc_verify_fb(struct drm_crtc *crtc, struct drm_framebuffer *fb)
 {
 	struct drm_device *dev = crtc->dev;
-	unsigned int depth, bpp;
+	unsigned int min_pitch;
 
-	drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
+	min_pitch = crtc->mode.hdisplay
+		  * drm_format_plane_cpp(fb->pixel_format, 0);
 
-	if (fb->pitches[0] != crtc->mode.hdisplay * bpp / 8) {
+	if (fb->pitches[0] != min_pitch) {
 		dev_err(dev->dev,
 			"Invalid pitch: fb and crtc widths must be the same");
 		return -EINVAL;
@@ -401,16 +400,14 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc,
 	if (info->tft_alt_mode)
 		reg |= LCDC_TFT_ALT_ENABLE;
 	if (priv->rev == 2) {
-		unsigned int depth, bpp;
-
-		drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp);
-		switch (bpp) {
-		case 16:
+		switch (crtc->primary->fb->pixel_format) {
+		case DRM_FORMAT_RGB565:
 			break;
-		case 32:
+		case DRM_FORMAT_XRGB8888:
+		case DRM_FORMAT_ARGB8888:
 			reg |= LCDC_V2_TFT_24BPP_UNPACK;
 			/* fallthrough */
-		case 24:
+		case DRM_FORMAT_RGB888:
 			reg |= LCDC_V2_TFT_24BPP_MODE;
 			break;
 		default:
-- 
Regards,

Laurent Pinchart



More information about the dri-devel mailing list