[PATCH v2 5/6] dt-bindings: add Sharp LQ123P1JX31 panel binding

[Rob Herring]

On Wed, Jun 08, 2016 at 07:52:45PM +0800, Yakir Yang wrote:
> The Sharp LQ123P1JX31 is an 12.3" 2400x1600 TFT-LCD panel
> connected using eDP interfaces.
> 
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> ---
> Changes in v2:
> - Add dt-bindings of Sharp LQ123P1JX31 panel in v2
> 
>  .../devicetree/bindings/display/panel/sharp,lq123p1jx31.txt        | 7 +++++++
>  1 file changed, 7 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
> new file mode 100644
> index 0000000..81938c0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
> @@ -0,0 +1,7 @@
> +Sharp 12.3" (2400x1600 pixels) TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "sharp,lq123p1jx31,"
                                             ^
Need to drop the comma.

No regulators or resets or pwms?

Rob