[PATCH RESEND 1/3] drm/i915/vlv: Make intel_crt_reset() per-encoder

Lyude cpaul at redhat.com
Fri Jun 17 21:58:22 UTC 2016


This lets call intel_crt_reset() in contexts where IRQs are disabled and
as such, can't hold the locks required to work with the connectors.

Cc: stable at vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Daniel Vetter <daniel.vetter at intel.com>
Signed-off-by: Lyude <cpaul at redhat.com>
---
 drivers/gpu/drm/i915/intel_crt.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 3fbb6fc..e4dc33e 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -713,11 +713,11 @@ static int intel_crt_set_property(struct drm_connector *connector,
 	return 0;
 }
 
-static void intel_crt_reset(struct drm_connector *connector)
+static void intel_crt_reset(struct drm_encoder *encoder)
 {
-	struct drm_device *dev = connector->dev;
+	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crt *crt = intel_attached_crt(connector);
+	struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
 
 	if (INTEL_INFO(dev)->gen >= 5) {
 		u32 adpa;
@@ -739,7 +739,6 @@ static void intel_crt_reset(struct drm_connector *connector)
  */
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
-	.reset = intel_crt_reset,
 	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
@@ -757,6 +756,7 @@ static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs
 };
 
 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
+	.reset = intel_crt_reset,
 	.destroy = intel_encoder_destroy,
 };
 
@@ -902,5 +902,5 @@ void intel_crt_init(struct drm_device *dev)
 		dev_priv->fdi_rx_config = I915_READ(FDI_RX_CTL(PIPE_A)) & fdi_config;
 	}
 
-	intel_crt_reset(connector);
+	intel_crt_reset(&crt->base.base);
 }
-- 
2.5.5



More information about the dri-devel mailing list