[PATCH v3 4/4] drm/i915: Enable polling when we don't have hpd
Lyude
cpaul at redhat.com
Tue Jun 21 17:00:28 UTC 2016
Unfortunately, there's two situations where we lose hpd right now:
- Runtime suspend
- When we've shut off all of the power wells on Valleyview/Cherryview
While it would be nice if this didn't cause issues, this has the
ability to get us in some awkward states where a user won't be able to
get their display to turn on. For instance; if we boot a Valleyview
system without any monitors connected, it won't need any of it's power
wells and thus shut them off. Since this causes us to lose HPD, this
means that unless the user knows how to ssh into their machine and do a
manual reprobe for monitors, none of the monitors they connect after
booting will actually work.
Eventually we should come up with a better fix then having to enable
polling for this, since this makes rpm a lot less useful, but for now
the infrastructure in i915 just isn't there yet to get hpd in these
situations.
Changes since v1:
- Add comment explaining the addition of the if
(!mode_config->poll_running) in intel_hpd_init()
- Remove unneeded if (!dev->mode_config.poll_enabled) in
i915_hpd_poll_init_work()
- Call to drm_helper_hpd_irq_event() after we disable polling
- Add cancel_work_sync() call to intel_hpd_cancel_work()
Changes since v2:
- Apparently dev->mode_config.poll_running doesn't actually reflect
whether or not a poll is currently in progress, and is actually used
for dynamic module paramter enabling/disabling. So now we instead
keep track of our own poll_running variable in dev_priv->hotplug
- Clean i915_hpd_poll_init_work() a little bit
Cc: stable at vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Lyude <cpaul at redhat.com>
---
drivers/gpu/drm/i915/i915_drv.c | 7 ++-
drivers/gpu/drm/i915/i915_drv.h | 4 ++
drivers/gpu/drm/i915/intel_drv.h | 2 +
drivers/gpu/drm/i915/intel_hotplug.c | 85 +++++++++++++++++++++++++++++----
drivers/gpu/drm/i915/intel_runtime_pm.c | 3 ++
5 files changed, 90 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 3eb47fb..5381d9e 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1612,6 +1612,9 @@ static int intel_runtime_suspend(struct device *device)
assert_forcewakes_inactive(dev_priv);
+ if (!IS_VALLEYVIEW(dev_priv) || !IS_CHERRYVIEW(dev_priv))
+ intel_hpd_poll_enable(dev_priv, true);
+
DRM_DEBUG_KMS("Device suspended\n");
return 0;
}
@@ -1667,8 +1670,10 @@ static int intel_runtime_resume(struct device *device)
* power well, so hpd is reinitialized from there. For
* everyone else do it here.
*/
- if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
+ if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) {
intel_hpd_init(dev_priv);
+ intel_hpd_poll_enable(dev_priv, false);
+ }
intel_enable_gt_powersave(dev_priv);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 239a3ec..36a9d90 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -283,6 +283,10 @@ struct i915_hotplug {
u32 short_port_mask;
struct work_struct dig_port_work;
+ struct work_struct poll_enable_work;
+ bool poll_enabled;
+ bool poll_running;
+
/*
* if we get a HPD irq from DP and a HPD irq from non-DP
* the non-DP HPD could block the workqueue on a mode config
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index dcbfdde..cedac13 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1385,6 +1385,8 @@ int intel_dsi_dcs_init_backlight_funcs(struct intel_connector *intel_connector);
/* intel_dvo.c */
void intel_dvo_init(struct drm_device *dev);
+/* intel_hotplug.c */
+void intel_hpd_poll_enable(struct drm_i915_private *dev_priv, bool enabled);
/* legacy fbdev emulation in intel_fbdev.c */
diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c
index ec3285f..1fc36a5 100644
--- a/drivers/gpu/drm/i915/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/intel_hotplug.c
@@ -464,20 +464,34 @@ void intel_hpd_init(struct drm_i915_private *dev_priv)
dev_priv->hotplug.stats[i].count = 0;
dev_priv->hotplug.stats[i].state = HPD_ENABLED;
}
- list_for_each_entry(connector, &mode_config->connector_list, head) {
- struct intel_connector *intel_connector = to_intel_connector(connector);
- connector->polled = intel_connector->polled;
- /* MST has a dynamic intel_connector->encoder and it's reprobing
- * is all handled by the MST helpers. */
- if (intel_connector->mst_port)
- continue;
+ /*
+ * When we're in the midst of doing connector polling in situations
+ * where we don't have working hpd, we need to make sure we don't try
+ * changing the polling settings of any connectors, since this can lead
+ * to us setting connector->polled to DRM_CONNECTOR_POLL_HPD, resulting
+ * in DRM's polling helpers automatically skipping the rest of the
+ * connectors that still need polling
+ */
+ if (!dev_priv->hotplug.poll_enabled) {
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct intel_connector *intel_connector =
+ to_intel_connector(connector);
+ connector->polled = intel_connector->polled;
- if (!connector->polled && I915_HAS_HOTPLUG(dev) &&
- intel_connector->encoder->hpd_pin > HPD_NONE)
- connector->polled = DRM_CONNECTOR_POLL_HPD;
+ /* MST has a dynamic intel_connector->encoder and it's
+ * reprobing is all handled by the MST helpers. */
+ if (intel_connector->mst_port)
+ continue;
+
+ if (!connector->polled && I915_HAS_HOTPLUG(dev) &&
+ intel_connector->encoder->hpd_pin > HPD_NONE)
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ }
}
+ intel_hpd_poll_enable(dev_priv, false);
+
/*
* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked checks happy.
@@ -488,10 +502,60 @@ void intel_hpd_init(struct drm_i915_private *dev_priv)
spin_unlock_irq(&dev_priv->irq_lock);
}
+void i915_hpd_poll_init_work(struct work_struct *work) {
+ struct drm_i915_private *dev_priv =
+ container_of(work, struct drm_i915_private,
+ hotplug.poll_enable_work);
+ struct drm_device *dev = dev_priv->dev;
+ struct intel_connector *intel_connector;
+ bool enabled = dev_priv->hotplug.poll_enabled;
+
+ mutex_lock(&dev->mode_config.mutex);
+
+ dev_priv->hotplug.poll_running = enabled;
+
+ for_each_intel_connector(dev, intel_connector) {
+ struct drm_connector *connector = &intel_connector->base;
+
+ if (enabled) {
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT;
+
+ } else if (!intel_connector->polled && I915_HAS_HOTPLUG(dev) &&
+ intel_connector->encoder->hpd_pin > HPD_NONE) {
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ }
+ }
+
+ if (enabled)
+ drm_kms_helper_poll_enable_locked(dev);
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ /*
+ * We might have missed any hotplugs that happened while we were
+ * in the middle of disabling polling
+ */
+ if (!enabled)
+ drm_helper_hpd_irq_event(dev);
+}
+
+void intel_hpd_poll_enable(struct drm_i915_private *dev_priv, bool enabled)
+{
+ dev_priv->hotplug.poll_enabled = enabled;
+
+ /*
+ * We might already be holding dev->mode_config.mutex, so do this in a
+ * seperate worker
+ */
+ schedule_work(&dev_priv->hotplug.poll_enable_work);
+}
+
void intel_hpd_init_work(struct drm_i915_private *dev_priv)
{
INIT_WORK(&dev_priv->hotplug.hotplug_work, i915_hotplug_work_func);
INIT_WORK(&dev_priv->hotplug.dig_port_work, i915_digport_work_func);
+ INIT_WORK(&dev_priv->hotplug.poll_enable_work, i915_hpd_poll_init_work);
INIT_DELAYED_WORK(&dev_priv->hotplug.reenable_work,
intel_hpd_irq_storm_reenable_work);
}
@@ -508,6 +572,7 @@ void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
cancel_work_sync(&dev_priv->hotplug.dig_port_work);
cancel_work_sync(&dev_priv->hotplug.hotplug_work);
+ cancel_work_sync(&dev_priv->hotplug.poll_enable_work);
cancel_delayed_work_sync(&dev_priv->hotplug.reenable_work);
}
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index f88ef76..b0e9395 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -1099,6 +1099,7 @@ static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
if (dev_priv->power_domains.initializing)
return;
+ intel_hpd_poll_enable(dev_priv, false);
intel_hpd_init(dev_priv);
/* Re-enable the ADPA, if we have one */
@@ -1120,6 +1121,8 @@ static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv)
synchronize_irq(dev_priv->dev->irq);
vlv_power_sequencer_reset(dev_priv);
+
+ intel_hpd_poll_enable(dev_priv, true);
}
static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
--
2.5.5
More information about the dri-devel
mailing list