[PATCH v2 22/25] dt-bindings: msm/dsi: Remove unused properties

Archit Taneja architt at codeaurora.org
Thu Jun 23 14:13:27 UTC 2016


Remove the DSI index properties from the DSI host and PHY binding
documentation. The indices aren't a valid property and shouldn't
be a part of the DT binding.

Signed-off-by: Archit Taneja <architt at codeaurora.org>
---
 Documentation/devicetree/bindings/display/msm/dsi.txt | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 6b1cab1..e6933a8 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -7,8 +7,6 @@ Required properties:
 - reg: Physical base address and length of the registers of controller
 - reg-names: The names of register regions. The following regions are required:
   * "dsi_ctrl"
-- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
-  be 0 or 1, since we have 2 DSI controllers at most for now.
 - interrupts: The interrupt signal from the DSI block.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks.
@@ -96,8 +94,6 @@ Required properties:
   * "dsi_phy_regulator"
 - clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
   2 clocks: A byte clock (index 0), and a pixel clock (index 1).
-- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
-  be 0 or 1, since we have 2 DSI PHYs at most for now.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks. See [1] for details on clock bindings.
 - clock-names: the following clocks are required:
@@ -116,7 +112,6 @@ Optional properties:
 Example:
 	dsi0: dsi at fd922800 {
 		compatible = "qcom,mdss-dsi-ctrl";
-		qcom,dsi-host-index = <0>;
 		interrupt-parent = <&mdp>;
 		interrupts = <4 0>;
 		reg-names = "dsi_ctrl";
@@ -199,7 +194,6 @@ Example:
 
 	dsi_phy0: dsi-phy at fd922a00 {
 		compatible = "qcom,dsi-phy-28nm-hpm";
-		qcom,dsi-phy-index = <0>;
 		reg-names =
 			"dsi_pll",
 			"dsi_phy",
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation



More information about the dri-devel mailing list