[PATCH 2/2] drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards.

Alex Deucher alexdeucher at gmail.com
Mon Mar 7 23:55:05 UTC 2016


On Sat, Mar 5, 2016 at 8:39 PM, Mario Kleiner
<mario.kleiner.de at gmail.com> wrote:
> As observed on Apple iMac10,1, DCE-3.2, RV-730,
> link rate of 2.7 Ghz is not selected, because
> the args.v1.ucConfig flag setting for 2.7 Ghz
> gets overwritten by a following assignment of
> the transmitter to use.
>
> Move link rate setup a few lines down to fix this.
> In practice this didn't have any positive or
> negative effect on display setup on the tested
> iMac10,1 so i don't know if backporting to stable
> makes sense or not.
>
> Signed-off-by: Mario Kleiner <mario.kleiner.de at gmail.com>

Applied, and yes, this should go to stable.

Thanks!

Alex

> ---
>  drivers/gpu/drm/radeon/atombios_encoders.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
> index a28377c..dc1e810 100644
> --- a/drivers/gpu/drm/radeon/atombios_encoders.c
> +++ b/drivers/gpu/drm/radeon/atombios_encoders.c
> @@ -892,8 +892,6 @@ atombios_dig_encoder_setup2(struct drm_encoder *encoder, int action, int panel_m
>                         else
>                                 args.v1.ucLaneNum = 4;
>
> -                       if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) && (dp_clock == 270000))
> -                               args.v1.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
>                         switch (radeon_encoder->encoder_id) {
>                         case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
>                                 args.v1.ucConfig = ATOM_ENCODER_CONFIG_V2_TRANSMITTER1;
> @@ -910,6 +908,10 @@ atombios_dig_encoder_setup2(struct drm_encoder *encoder, int action, int panel_m
>                                 args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKB;
>                         else
>                                 args.v1.ucConfig |= ATOM_ENCODER_CONFIG_LINKA;
> +
> +                       if (ENCODER_MODE_IS_DP(args.v1.ucEncoderMode) && (dp_clock == 270000))
> +                               args.v1.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
> +
>                         break;
>                 case 2:
>                 case 3:
> --
> 2.7.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel


More information about the dri-devel mailing list