[PATCH v6 1/6] ALSA: pcm: add IEC958 channel status helper for hw_params
Jyri Sarha
jsarha at ti.com
Wed Mar 9 14:38:59 UTC 2016
On 03/09/16 12:08, Arnaud Pouliquen wrote:
> Hello Jyri,
>
> Acked-by: Arnaud Pouliquen <arnaud.pouliquen at st.com>
>
> With few nitpicking remarks on form.
>
> Regards
> Arnaud
>
> On 03/08/2016 09:14 PM, Jyri Sarha wrote:
>> Add IEC958 channel status helper that gets the audio properties from
>> snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
>> produce the channel status bits already in audio stream configuration
>> phase.
>>
>> Signed-off-by: Jyri Sarha <jsarha at ti.com>
>> ---
>> include/sound/pcm_iec958.h | 2 ++
>> sound/core/pcm_iec958.c | 53 +++++++++++++++++++++++++++++++---------------
>> 2 files changed, 38 insertions(+), 17 deletions(-)
>>
>> diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
>> index 0eed397..36f023a 100644
>> --- a/include/sound/pcm_iec958.h
>> +++ b/include/sound/pcm_iec958.h
>> @@ -6,4 +6,6 @@
>> int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>> size_t len);
>>
>> +int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
>> + u8 *cs, size_t len);
>> #endif
>> diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
>> index 36b2d7a..27e0981 100644
>> --- a/sound/core/pcm_iec958.c
>> +++ b/sound/core/pcm_iec958.c
>> @@ -9,30 +9,18 @@
>> #include <linux/types.h>
>> #include <sound/asoundef.h>
>> #include <sound/pcm.h>
>> +#include <sound/pcm_params.h>
>> #include <sound/pcm_iec958.h>
>>
>> -/**
>> - * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
>> - * @runtime: pcm runtime structure with ->rate filled in
>> - * @cs: channel status buffer, at least four bytes
>> - * @len: length of channel status buffer
>> - *
>> - * Create the consumer format channel status data in @cs of maximum size
>> - * @len corresponding to the parameters of the PCM runtime @runtime.
>> - *
>> - * Drivers may wish to tweak the contents of the buffer after creation.
>> - *
>> - * Returns: length of buffer, or negative error code if something failed.
>> - */
>> -int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>> - size_t len)
>> +static int create_iec958_consumer(uint rate, uint sample_width,
>> + u8 *cs, size_t len)
>> {
>> unsigned int fs, ws;
>>
>> if (len < 4)
>> return -EINVAL;
>>
>> - switch (runtime->rate) {
>> + switch (rate) {
>> case 32000:
>> fs = IEC958_AES3_CON_FS_32000;
>> break;
>> @@ -59,7 +47,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>> }
>>
>> if (len > 4) {
>> - switch (snd_pcm_format_width(runtime->format)) {
>> + switch (sample_width) {
>> case 16:
>> ws = IEC958_AES4_CON_WORDLEN_20_16;
>> break;
>> @@ -71,6 +59,7 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>> IEC958_AES4_CON_MAX_WORDLEN_24;
>> break;
>> case 24:
>> + case 32: /* Assume 24-bit width for 32-bit samples. */
>> ws = IEC958_AES4_CON_WORDLEN_24_20 |
>> IEC958_AES4_CON_MAX_WORDLEN_24;
>> break;
>> @@ -92,4 +81,34 @@ int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>>
>> return len;
>> }
>> +
>> +/**
>> + * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
>> + * @runtime: pcm runtime structure with ->rate filled in
>> + * @cs: channel status buffer, at least four bytes
>> + * @len: length of channel status buffer
>> + *
>> + * Create the consumer format channel status data in @cs of maximum size
>> + * @len corresponding to the parameters of the PCM runtime @runtime.
>> + *
>> + * Drivers may wish to tweak the contents of the buffer after creation.
>> + *
>> + * Returns: length of buffer, or negative error code if something failed.
>> + */
>> +int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>> + size_t len)
> should be aligned on parenthesis
>> +{
>> + return create_iec958_consumer(runtime->rate,
>> + snd_pcm_format_width(runtime->format),
>> + cs, len);
>> +}
>> EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>> +
>> +
> No kernel-doc comment?
Oh yes. It'll be mostly redundant with snd_pcm_create_iec958_consumer()
but still it should be there.
>> +int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> Could be snd_pcm_hw_params_create_iec958_consumer to be coherent with
> functions declared in pcm.h
I feel that iec958 should be earlier in the name because it is the
common denominator in this c-file. Then again I have no strong opinions
about this.
>> + u8 *cs, size_t len)
> should be aligned on parenthesis
But it is. It just that the diff '+'-sign pushes the line above one char
right, but the line bellow is not pushed because it indented with tabs
(like it should be).
>> +{
>> + return create_iec958_consumer(params_rate(params), params_width(params),
>> + cs, len);
>> +}
>> +EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
>>
More information about the dri-devel
mailing list