[PATCH v3 1/3] devicetree/bindings: add reset-gpios and vcc-supply for panel-dpi

[Uwe Kleine-König]

Some displays have a reset input and/or need a regulator to function
properly. Allow to specify them for panel-dpi devices.

Acked-by: Rob Herring <robh at kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 Documentation/devicetree/bindings/display/panel/panel-dpi.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
index 216c894d4f99..b52ac52757df 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
@@ -7,6 +7,8 @@ Required properties:
 Optional properties:
 - label: a symbolic name for the panel
 - enable-gpios: panel enable gpio
+- reset-gpios: GPIO to control the RESET pin
+- vcc-supply: phandle of regulator that will be used to enable power to the display
 
 Required nodes:
 - "panel-timing" containing video timings
-- 
2.7.0