[PATCH 06/52] drm/amdgpu/atom: add support for new SetPixelClock table
Alex Deucher
alexdeucher at gmail.com
Wed Mar 23 17:42:22 UTC 2016
New version of the SetPixelClock table for elm/baf. The
new table calculates the pll dividers and handles spread
spectrum calculations and setup.
Reviewed-by: Christian König <christian.koenig at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou at amd.com>
---
drivers/gpu/drm/amd/amdgpu/atombios_crtc.c | 53 +++++++++++++++++++++++-------
1 file changed, 41 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_crtc.c b/drivers/gpu/drm/amd/amdgpu/atombios_crtc.c
index bd6c530..49a39b1 100644
--- a/drivers/gpu/drm/amd/amdgpu/atombios_crtc.c
+++ b/drivers/gpu/drm/amd/amdgpu/atombios_crtc.c
@@ -461,6 +461,7 @@ union set_pixel_clock {
PIXEL_CLOCK_PARAMETERS_V3 v3;
PIXEL_CLOCK_PARAMETERS_V5 v5;
PIXEL_CLOCK_PARAMETERS_V6 v6;
+ PIXEL_CLOCK_PARAMETERS_V7 v7;
};
/* on DCE5, make sure the voltage is high enough to support the
@@ -566,18 +567,18 @@ static bool is_pixel_clock_source_from_pll(u32 encoder_mode, int pll_id)
}
void amdgpu_atombios_crtc_program_pll(struct drm_crtc *crtc,
- u32 crtc_id,
- int pll_id,
- u32 encoder_mode,
- u32 encoder_id,
- u32 clock,
- u32 ref_div,
- u32 fb_div,
- u32 frac_fb_div,
- u32 post_div,
- int bpc,
- bool ss_enabled,
- struct amdgpu_atom_ss *ss)
+ u32 crtc_id,
+ int pll_id,
+ u32 encoder_mode,
+ u32 encoder_id,
+ u32 clock,
+ u32 ref_div,
+ u32 fb_div,
+ u32 frac_fb_div,
+ u32 post_div,
+ int bpc,
+ bool ss_enabled,
+ struct amdgpu_atom_ss *ss)
{
struct drm_device *dev = crtc->dev;
struct amdgpu_device *adev = dev->dev_private;
@@ -695,6 +696,34 @@ void amdgpu_atombios_crtc_program_pll(struct drm_crtc *crtc,
args.v6.ucEncoderMode = encoder_mode;
args.v6.ucPpll = pll_id;
break;
+ case 7:
+ args.v7.ulPixelClock = cpu_to_le32(clock * 10); /* 100 hz units */
+ args.v7.ucMiscInfo = 0;
+ if ((encoder_mode == ATOM_ENCODER_MODE_DVI) &&
+ (clock > 165000))
+ args.v7.ucMiscInfo |= PIXEL_CLOCK_V7_MISC_DVI_DUALLINK_EN;
+ args.v7.ucCRTC = crtc_id;
+ if (encoder_mode == ATOM_ENCODER_MODE_HDMI) {
+ switch (bpc) {
+ case 8:
+ default:
+ args.v7.ucDeepColorRatio = PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_DIS;
+ break;
+ case 10:
+ args.v7.ucDeepColorRatio = PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_5_4;
+ break;
+ case 12:
+ args.v7.ucDeepColorRatio = PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_3_2;
+ break;
+ case 16:
+ args.v7.ucDeepColorRatio = PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_2_1;
+ break;
+ }
+ }
+ args.v7.ucTransmitterID = encoder_id;
+ args.v7.ucEncoderMode = encoder_mode;
+ args.v7.ucPpll = pll_id;
+ break;
default:
DRM_ERROR("Unknown table version %d %d\n", frev, crev);
return;
--
2.5.0
More information about the dri-devel
mailing list