[PATCH v5 05/46] pwm: introduce the pwm_args concept
Boris Brezillon
boris.brezillon at free-electrons.com
Wed Mar 30 20:03:28 UTC 2016
Currently the PWM core mixes the current PWM state with the per-platform
reference config (specified through the PWM lookup table, DT definition or
directly hardcoded in PWM drivers).
Create a pwm_args struct to store this reference config, so that PWM users
can differentiate the current config from the reference one.
Patch all places where pwm->args should be initialized. We keep the
pwm_set_polarity/period() calls until all PWM users are patched to
use pwm_args instead of pwm_get_period/polarity().
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
drivers/pwm/core.c | 13 +++++++++----
drivers/pwm/pwm-clps711x.c | 3 ++-
drivers/pwm/pwm-pxa.c | 1 +
include/linux/pwm.h | 26 ++++++++++++++++++++++++++
4 files changed, 38 insertions(+), 5 deletions(-)
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 7c330ff..cd55d61 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -146,12 +146,14 @@ of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
if (IS_ERR(pwm))
return pwm;
- pwm_set_period(pwm, args->args[1]);
+ pwm->args.period = args->args[1];
+ pwm_set_period(pwm, pwm->args.period);
if (args->args[2] & PWM_POLARITY_INVERTED)
- pwm_set_polarity(pwm, PWM_POLARITY_INVERSED);
+ pwm->args.polarity = PWM_POLARITY_INVERSED;
else
- pwm_set_polarity(pwm, PWM_POLARITY_NORMAL);
+ pwm->args.polarity = PWM_POLARITY_NORMAL;
+ pwm_set_polarity(pwm, pwm->args.polarity);
return pwm;
}
@@ -172,7 +174,8 @@ of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
if (IS_ERR(pwm))
return pwm;
- pwm_set_period(pwm, args->args[1]);
+ pwm->args.period = args->args[1];
+ pwm_set_period(pwm, pwm->args.period);
return pwm;
}
@@ -740,6 +743,8 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
if (IS_ERR(pwm))
goto out;
+ pwm->args.period = chosen->period;
+ pwm->args.polarity = chosen->polarity;
pwm_set_period(pwm, chosen->period);
pwm_set_polarity(pwm, chosen->polarity);
diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c
index a80c108..807a48d 100644
--- a/drivers/pwm/pwm-clps711x.c
+++ b/drivers/pwm/pwm-clps711x.c
@@ -60,7 +60,8 @@ static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
return -EINVAL;
/* Store constant period value */
- pwm_set_period(pwm, DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq));
+ pwm->args.period = DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq);
+ pwm_set_period(pwm, pwm->args.period);
return 0;
}
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
index cb2f702..3fcc886 100644
--- a/drivers/pwm/pwm-pxa.c
+++ b/drivers/pwm/pwm-pxa.c
@@ -160,6 +160,7 @@ pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
if (IS_ERR(pwm))
return pwm;
+ pwm->args.period = args->args[0];
pwm_set_period(pwm, args->args[0]);
return pwm;
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 6555f01..ed65354 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -74,6 +74,23 @@ enum pwm_polarity {
PWM_POLARITY_INVERSED,
};
+/**
+ * struct pwm_args - PWM arguments
+ * @period: reference period
+ * @polarity: reference polarity
+ *
+ * This structure describe board-dependent arguments attached to a PWM
+ * device. Those arguments are usually retrieved from the PWM lookup table or
+ * DT definition.
+ * This should not be confused with the PWM state: PWM args not representing
+ * the current PWM state, but the configuration the PWM user plan to use
+ * on this PWM device.
+ */
+struct pwm_args {
+ unsigned int period;
+ enum pwm_polarity polarity;
+};
+
enum {
PWMF_REQUESTED = 1 << 0,
PWMF_ENABLED = 1 << 1,
@@ -91,6 +108,7 @@ enum {
* @period: period of the PWM signal (in nanoseconds)
* @duty_cycle: duty cycle of the PWM signal (in nanoseconds)
* @polarity: polarity of the PWM signal
+ * @args: PWM arguments
*/
struct pwm_device {
const char *label;
@@ -103,6 +121,8 @@ struct pwm_device {
unsigned int period;
unsigned int duty_cycle;
enum pwm_polarity polarity;
+
+ struct pwm_args args;
};
static inline bool pwm_is_enabled(const struct pwm_device *pwm)
@@ -142,6 +162,12 @@ static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
return pwm ? pwm->polarity : PWM_POLARITY_NORMAL;
}
+static inline void pwm_get_args(const struct pwm_device *pwm,
+ struct pwm_args *args)
+{
+ *args = pwm->args;
+}
+
/**
* struct pwm_ops - PWM controller operations
* @request: optional hook for requesting a PWM
--
2.5.0
More information about the dri-devel
mailing list