[PATCH v5 24/46] pwm: sti: add support for initial state retrieval

Boris Brezillon boris.brezillon at free-electrons.com
Wed Mar 30 20:03:47 UTC 2016


Implement ->get_state() to provide support for initial state retrieval.

Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
 drivers/pwm/pwm-sti.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
index 92abbd5..0fbca94 100644
--- a/drivers/pwm/pwm-sti.c
+++ b/drivers/pwm/pwm-sti.c
@@ -238,6 +238,46 @@ static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	mutex_unlock(&pc->sti_pwm_lock);
 }
 
+static void sti_pwm_get_state(struct pwm_chip *chip,
+			      struct pwm_device *pwm,
+			      struct pwm_state *pstate)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+	unsigned int regval, prescaler;
+	u64 timens;
+	int ret;
+
+	/* The clock has to be enabled to access PWM registers */
+	ret = clk_enable(pc->clk);
+	if (ret) {
+		dev_err(chip->dev, "Failed to enable PWM clk");
+		return;
+	}
+
+	regmap_field_read(pc->prescale_high, &regval);
+	prescaler = regval << 4;
+	regmap_field_read(pc->prescale_low, &regval);
+	prescaler |= regval;
+
+	timens = (u64)(prescaler + 1) * NSEC_PER_SEC *
+		 (pc->cdata->max_pwm_cnt + 1);
+	do_div(timens, pc->clk_rate);
+
+	pstate->period = timens;
+
+	regmap_read(pc->regmap, STI_DS_REG(pwm->hwpwm), &regval);
+	timens = (u64)(regval + 1) * pstate->period;
+	do_div(timens, pc->cdata->max_pwm_cnt + 1);
+	pstate->duty_cycle = timens;
+
+	regmap_field_read(pc->pwm_en, &regval);
+	pstate->enabled = regval;
+
+	pstate->polarity = PWM_POLARITY_NORMAL;
+
+	clk_disable(pc->clk);
+}
+
 static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
@@ -249,6 +289,7 @@ static const struct pwm_ops sti_pwm_ops = {
 	.config = sti_pwm_config,
 	.enable = sti_pwm_enable,
 	.disable = sti_pwm_disable,
+	.get_state = sti_pwm_get_state,
 	.free = sti_pwm_free,
 	.owner = THIS_MODULE,
 };
-- 
2.5.0



More information about the dri-devel mailing list