[PATCH 1/5] drm: Add new DCS commands in the enum list
Andrzej Hajda
a.hajda at samsung.com
Thu Mar 31 05:54:18 UTC 2016
On 03/30/2016 04:03 PM, Jani Nikula wrote:
> From: Deepak M <m.deepak at intel.com>
>
> Adding new DCS commands which are specified in the
> DCS 1.3 spec related to CABC.
>
> v2: Sorted the Macro`s by value (Andrzej)
>
> v3 by Jani: sort all of enum, refer to MIPI DCS 1.3
>
> Cc: Andrzej Hajda <a.hajda at samsung.com>
> Cc: Thierry Reding <thierry.reding at gmail.com>
> Cc: David Airlie <airlied at linux.ie>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter at intel.com>
> Cc: <dri-devel at lists.freedesktop.org>
> Suggested-by: Jani Nikula <jani.nikula at intel.com>
> Signed-off-by: Deepak M <m.deepak at intel.com>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
DCS 1.3 introduces also:
get_error_count_on_DSI 05h
get_image_checksum_ct 15h
get_image_checksum_rgb 14h
read_PPS_continue a9h
read_PPS_start A2h
It would be good to add them, but as the patch
says it adds only CABC related commands so no big deal.
Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>
Regards
Andrzej
> ---
> include/video/mipi_display.h | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
> index ddcc8ca7316b..19aa65a35546 100644
> --- a/include/video/mipi_display.h
> +++ b/include/video/mipi_display.h
> @@ -115,6 +115,14 @@ enum {
> MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E,
> MIPI_DCS_SET_TEAR_SCANLINE = 0x44,
> MIPI_DCS_GET_SCANLINE = 0x45,
> + MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51, /* MIPI DCS 1.3 */
> + MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52, /* MIPI DCS 1.3 */
> + MIPI_DCS_WRITE_CONTROL_DISPLAY = 0x53, /* MIPI DCS 1.3 */
> + MIPI_DCS_GET_CONTROL_DISPLAY = 0x54, /* MIPI DCS 1.3 */
> + MIPI_DCS_WRITE_POWER_SAVE = 0x55, /* MIPI DCS 1.3 */
> + MIPI_DCS_GET_POWER_SAVE = 0x56, /* MIPI DCS 1.3 */
> + MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E, /* MIPI DCS 1.3 */
> + MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F, /* MIPI DCS 1.3 */
> MIPI_DCS_READ_DDB_START = 0xA1,
> MIPI_DCS_READ_DDB_CONTINUE = 0xA8,
> };
More information about the dri-devel
mailing list