[PATCH] drm/amdgpu/gfx: adjust gfx_v8_0_send_serdes_cmd for ST

Alex Deucher alexdeucher at gmail.com
Mon May 2 20:00:26 UTC 2016


Acked-by: Tom St Denis <tom.stdenis at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 7e94a85..b15162d 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -4292,7 +4292,8 @@ static void gfx_v8_0_send_serdes_cmd(struct amdgpu_device *adev,
 	WREG32(mmRLC_SERDES_WR_NONCU_MASTER_MASK, 0xffffffff);
 
 	data = RREG32(mmRLC_SERDES_WR_CTRL);
-	data &= ~(RLC_SERDES_WR_CTRL__WRITE_COMMAND_MASK |
+	if (adev->asic_type == CHIP_STONEY)
+			data &= ~(RLC_SERDES_WR_CTRL__WRITE_COMMAND_MASK |
 			RLC_SERDES_WR_CTRL__READ_COMMAND_MASK |
 			RLC_SERDES_WR_CTRL__P1_SELECT_MASK |
 			RLC_SERDES_WR_CTRL__P2_SELECT_MASK |
@@ -4300,13 +4301,23 @@ static void gfx_v8_0_send_serdes_cmd(struct amdgpu_device *adev,
 			RLC_SERDES_WR_CTRL__POWER_DOWN_MASK |
 			RLC_SERDES_WR_CTRL__POWER_UP_MASK |
 			RLC_SERDES_WR_CTRL__SHORT_FORMAT_MASK |
-			RLC_SERDES_WR_CTRL__BPM_DATA_MASK |
-			RLC_SERDES_WR_CTRL__REG_ADDR_MASK |
 			RLC_SERDES_WR_CTRL__SRBM_OVERRIDE_MASK);
+	else
+		data &= ~(RLC_SERDES_WR_CTRL__WRITE_COMMAND_MASK |
+			  RLC_SERDES_WR_CTRL__READ_COMMAND_MASK |
+			  RLC_SERDES_WR_CTRL__P1_SELECT_MASK |
+			  RLC_SERDES_WR_CTRL__P2_SELECT_MASK |
+			  RLC_SERDES_WR_CTRL__RDDATA_RESET_MASK |
+			  RLC_SERDES_WR_CTRL__POWER_DOWN_MASK |
+			  RLC_SERDES_WR_CTRL__POWER_UP_MASK |
+			  RLC_SERDES_WR_CTRL__SHORT_FORMAT_MASK |
+			  RLC_SERDES_WR_CTRL__BPM_DATA_MASK |
+			  RLC_SERDES_WR_CTRL__REG_ADDR_MASK |
+			  RLC_SERDES_WR_CTRL__SRBM_OVERRIDE_MASK);
 	data |= (RLC_SERDES_WR_CTRL__RSVD_BPM_ADDR_MASK |
-			(cmd << RLC_SERDES_WR_CTRL__BPM_DATA__SHIFT) |
-			(reg_addr << RLC_SERDES_WR_CTRL__REG_ADDR__SHIFT) |
-			(0xff << RLC_SERDES_WR_CTRL__BPM_ADDR__SHIFT));
+		 (cmd << RLC_SERDES_WR_CTRL__BPM_DATA__SHIFT) |
+		 (reg_addr << RLC_SERDES_WR_CTRL__REG_ADDR__SHIFT) |
+		 (0xff << RLC_SERDES_WR_CTRL__BPM_ADDR__SHIFT));
 
 	WREG32(mmRLC_SERDES_WR_CTRL, data);
 }
-- 
2.5.5



More information about the dri-devel mailing list