[PATCH] drm/edid : cache edid range limits in drm connector
Daniel Vetter
daniel at ffwll.ch
Tue May 3 20:23:51 UTC 2016
On Tue, May 03, 2016 at 11:05:24AM -0400, Vitaly Prosyak wrote:
> Cache in drm connector the edid range limits properties:
> min/max vertical refresh rates and max pixel clock.
> It would be used when enter to drr mode.
>
> Signed-off-by: Vitaly Prosyak <vitaly.prosyak at amd.com>
Where's the patches that will use this? It might make sense to instead
have some helper functions to compute these values, so that drivers can
store them wherever they want/need. But impossible to tell without the
users of this stuff.
-Daniel
> ---
> drivers/gpu/drm/drm_edid.c | 11 +++++++++++
> include/drm/drm_crtc.h | 5 +++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 04cb487..7e49962 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -2190,6 +2190,17 @@ do_inferred_modes(struct detailed_timing *timing, void *c)
> timing);
> break;
> case 0x01: /* just the ranges, no formula */
> + closure->connector->min_vfreq = range->min_vfreq;
> + closure->connector->max_vfreq = range->max_vfreq;
> + if (closure->edid->revision >= 4) {
> + if ((range->flags & 0x03) == 0x3)
> + closure->connector->min_vfreq += 255;
> + if (range->flags & 0x02)
> + closure->connector->max_vfreq += 255;
> + }
> + closure->connector->max_pixel_clock_khz =
> + range_pixel_clock(closure->edid, (u8 *)timing);
> + break;
> default:
> break;
> }
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index c5b4b81..85fc554 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1230,6 +1230,11 @@ struct drm_connector {
> uint8_t num_h_tile, num_v_tile;
> uint8_t tile_h_loc, tile_v_loc;
> uint16_t tile_h_size, tile_v_size;
> +
> + /*EDID range limits for drr*/
> + int min_vfreq ;
> + int max_vfreq ;
> + int max_pixel_clock_khz;
> };
>
> /**
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list