[PATCH v2 4/4] drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT
Sharma, Shashank
shashank.sharma at intel.com
Wed May 4 10:24:41 UTC 2016
On 5/3/2016 12:38 AM, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> DP dual mode type 1 DVI adaptors aren't required to implement any
> registers, so it's a bit hard to detect them. The best way would
> be to check the state of the CONFIG1 pin, but we have no way to
> do that. So as a last resort, check the VBT to see if the HDMI
> port is in fact a dual mode capable DP port.
>
> v2: Deal with VBT code reorganization
> Deal with DRM_DP_DUAL_MODE_UNKNOWN
> Reduce DEVICE_TYPE_DP_DUAL_MODE_BITS a bit
> Accept both DP and HDMI dvo_port in VBT as my BSW
> at least declare its DP port as HDMI :(
>
> Cc: stable at vger.kernel.org
> Cc: Tore Anderson <tore at fud.no>
> Reported-by: Tore Anderson <tore at fud.no>
> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"")
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: Shashank Sharma <shashank.sharma at intel.com>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> drivers/gpu/drm/i915/intel_bios.c | 36 +++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_hdmi.c | 30 +++++++++++++++++++++++++----
> drivers/gpu/drm/i915/intel_vbt_defs.h | 13 +++++++++++++
> 4 files changed, 76 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index ff6aaf0c4e1e..abe43922a08f 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -3489,6 +3489,7 @@ bool intel_bios_is_valid_vbt(const void *buf, size_t size);
> bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv);
> bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin);
> bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port);
> +bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port);
> bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port);
> bool intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
> enum port port);
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 81518116e00d..8b68c4882fba 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -1597,6 +1597,42 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
> return false;
> }
>
> +bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port)
> +{
> + static const struct {
> + u16 dp, hdmi;
> + } port_mapping[] = {
> + /*
> + * Buggy VBTs may declare DP ports as having
> + * HDMI type dvo_port :( So let's check both.
> + */
> + [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
> + [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
> + [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
> + [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
> + };
> + int i;
> +
> + if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
> + return false;
> +
> + if (!dev_priv->vbt.child_dev_num)
> + return false;
> +
> + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
> + const union child_device_config *p_child =
> + &dev_priv->vbt.child_dev[i];
> +
> + if ((p_child->common.dvo_port == port_mapping[port].dp ||
> + p_child->common.dvo_port == port_mapping[port].hdmi) &&
> + (p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) ==
> + (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
> + return true;
> + }
> +
> + return false;
> +}
> +
> /**
> * intel_bios_is_dsi_present - is DSI present in VBT
> * @dev_priv: i915 device instance
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index c4d93e6b4bed..6b52c6accf6a 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1396,16 +1396,38 @@ intel_hdmi_unset_edid(struct drm_connector *connector)
> }
>
> static void
> -intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector)
> +intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
> {
> struct drm_i915_private *dev_priv = to_i915(connector->dev);
> struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
> + enum port port = hdmi_to_dig_port(hdmi)->port;
> struct i2c_adapter *adapter =
> intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
> enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter);
>
> - if (type == DRM_DP_DUAL_MODE_NONE ||
> - type == DRM_DP_DUAL_MODE_UNKNOWN)
> + /*
> + * Type 1 DVI adaptors are not required to implement any
> + * registers, so we can't always detect their presence.
> + * Ideally we should be able to check the state of the
> + * CONFIG1 pin, but no such luck on our hardware.
> + *
> + * The only method left to us is to check the VBT to see
> + * if the port is a dual mode capable DP port. But let's
> + * only do that when we sucesfully read the EDID, to avoid
> + * confusing log messages about DP dual mode adaptors when
> + * there's nothing connected to the port.
> + */
> + if (type == DRM_DP_DUAL_MODE_UNKNOWN) {
> + if (has_edid &&
> + intel_bios_is_port_dp_dual_mode(dev_priv, port)) {
> + DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on VBT\n");
> + type = DRM_DP_DUAL_MODE_TYPE1_DVI;
> + } else {
> + type = DRM_DP_DUAL_MODE_NONE;
> + }
> + }
> +
> + if (type == DRM_DP_DUAL_MODE_NONE)
> return;
>
> hdmi->dp_dual_mode.type = type;
> @@ -1432,7 +1454,7 @@ intel_hdmi_set_edid(struct drm_connector *connector, bool force)
> intel_gmbus_get_adapter(dev_priv,
> intel_hdmi->ddc_bus));
>
> - intel_hdmi_dp_dual_mode_detect(connector);
> + intel_hdmi_dp_dual_mode_detect(connector, edid != NULL);
>
> intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
> }
> diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h
> index a4a42f254c35..b1019e01e51d 100644
> --- a/drivers/gpu/drm/i915/intel_vbt_defs.h
> +++ b/drivers/gpu/drm/i915/intel_vbt_defs.h
> @@ -746,6 +746,7 @@ struct bdb_psr {
> #define DEVICE_TYPE_INT_TV 0x1009
> #define DEVICE_TYPE_HDMI 0x60D2
> #define DEVICE_TYPE_DP 0x68C6
> +#define DEVICE_TYPE_DP_DUAL_MODE 0x60D6
> #define DEVICE_TYPE_eDP 0x78C6
>
> #define DEVICE_TYPE_CLASS_EXTENSION (1 << 15)
> @@ -780,6 +781,18 @@ struct bdb_psr {
> DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
> DEVICE_TYPE_ANALOG_OUTPUT)
>
> +#define DEVICE_TYPE_DP_DUAL_MODE_BITS \
> + (DEVICE_TYPE_INTERNAL_CONNECTOR | \
> + DEVICE_TYPE_NOT_HDMI_OUTPUT | \
Why do we need this one ? Shouldn't the others cover all the cases ?
Is there a special case in your mind ?
Regards
Shashank
> + DEVICE_TYPE_MIPI_OUTPUT | \
> + DEVICE_TYPE_COMPOSITE_OUTPUT | \
> + DEVICE_TYPE_LVDS_SINGALING | \
> + DEVICE_TYPE_TMDS_DVI_SIGNALING | \
> + DEVICE_TYPE_VIDEO_SIGNALING | \
> + DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
> + DEVICE_TYPE_DIGITAL_OUTPUT | \
> + DEVICE_TYPE_ANALOG_OUTPUT)
> +
> /* define the DVO port for HDMI output type */
> #define DVO_B 1
> #define DVO_C 2
>
More information about the dri-devel
mailing list