[PATCH 1/4] drm/edid: move displayid tiled block parsing into separate function.

Jani Nikula jani.nikula at linux.intel.com
Tue May 10 09:01:36 UTC 2016


On Tue, 10 May 2016, Jani Nikula <jani.nikula at linux.intel.com> wrote:
> On Tue, 10 May 2016, Dave Airlie <airlied at gmail.com> wrote:
>> From: Dave Airlie <airlied at redhat.com>
>>
>> This just makes the code easier to follow.
>>
>> Signed-off-by: Dave Airlie <airlied at redhat.com>
>
> Reviewed-by: Jani Nikula <jani.nikula at intel.com>

Ooops, one thing needs fixing below.

>
>> ---
>>  drivers/gpu/drm/drm_edid.c | 111 ++++++++++++++++++++++++---------------------
>>  1 file changed, 59 insertions(+), 52 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
>> index 96b181a..9dbaaf4 100644
>> --- a/drivers/gpu/drm/drm_edid.c
>> +++ b/drivers/gpu/drm/drm_edid.c
>> @@ -4152,6 +4152,60 @@ drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
>>  }
>>  EXPORT_SYMBOL(drm_hdmi_vendor_infoframe_from_display_mode);
>>  
>> +static int drm_parse_tiled_block(struct drm_connector *connector,
>> +				 struct displayid_block *block)
>> +{
>> +	struct displayid_tiled_block *tile = (struct displayid_tiled_block *)block;
>> +	u16 w, h;
>> +	u8 tile_v_loc, tile_h_loc;
>> +	u8 num_v_tile, num_h_tile;
>> +	struct drm_tile_group *tg;
>> +
>> +	w = tile->tile_size[0] | tile->tile_size[1] << 8;
>> +	h = tile->tile_size[2] | tile->tile_size[3] << 8;
>> +
>> +	num_v_tile = (tile->topo[0] & 0xf) | (tile->topo[2] & 0x30);
>> +	num_h_tile = (tile->topo[0] >> 4) | ((tile->topo[2] >> 2) & 0x30);
>> +	tile_v_loc = (tile->topo[1] & 0xf) | ((tile->topo[2] & 0x3) << 4);
>> +	tile_h_loc = (tile->topo[1] >> 4) | (((tile->topo[2] >> 2) & 0x3) << 4);
>> +
>> +	connector->has_tile = true;
>> +	if (tile->tile_cap & 0x80)
>> +		connector->tile_is_single_monitor = true;
>> +
>> +	connector->num_h_tile = num_h_tile + 1;
>> +	connector->num_v_tile = num_v_tile + 1;
>> +	connector->tile_h_loc = tile_h_loc;
>> +	connector->tile_v_loc = tile_v_loc;
>> +	connector->tile_h_size = w + 1;
>> +	connector->tile_v_size = h + 1;
>> +
>> +	DRM_DEBUG_KMS("tile cap 0x%x\n", tile->tile_cap);
>> +	DRM_DEBUG_KMS("tile_size %d x %d\n", w + 1, h + 1);
>> +	DRM_DEBUG_KMS("topo num tiles %dx%d, location %dx%d\n",
>> +		      num_h_tile + 1, num_v_tile + 1, tile_h_loc, tile_v_loc);
>> +	DRM_DEBUG_KMS("vend %c%c%c\n", tile->topology_id[0], tile->topology_id[1], tile->topology_id[2]);
>> +
>> +	tg = drm_mode_get_tile_group(connector->dev, tile->topology_id);
>> +	if (!tg) {
>> +		tg = drm_mode_create_tile_group(connector->dev, tile->topology_id);
>> +	}
>> +	if (!tg)
>> +		return -ENOMEM;
>> +
>> +	if (connector->tile_group != tg) {
>> +		/* if we haven't got a pointer,
>> +		   take the reference, drop ref to old tile group */
>> +		if (connector->tile_group) {
>> +			drm_mode_put_tile_group(connector->dev, connector->tile_group);
>> +		}
>> +		connector->tile_group = tg;
>> +	} else
>> +		/* if same tile group, then release the ref we just took. */
>> +		drm_mode_put_tile_group(connector->dev, tg);
>> +	return 0;
>> +}
>> +
>>  static int drm_parse_display_id(struct drm_connector *connector,
>>  				u8 *displayid, int length,
>>  				bool is_edid_extension)
>> @@ -4162,6 +4216,7 @@ static int drm_parse_display_id(struct drm_connector *connector,
>>  	struct displayid_block *block;
>>  	u8 csum = 0;
>>  	int i;
>> +	int ret;
>>  
>>  	if (is_edid_extension)
>>  		idx = 1;
>> @@ -4187,58 +4242,10 @@ static int drm_parse_display_id(struct drm_connector *connector,
>>  		      block->tag, block->rev, block->num_bytes);
>>  
>>  	switch (block->tag) {
>> -	case DATA_BLOCK_TILED_DISPLAY: {
>> -		struct displayid_tiled_block *tile = (struct displayid_tiled_block *)block;
>> -
>> -		u16 w, h;
>> -		u8 tile_v_loc, tile_h_loc;
>> -		u8 num_v_tile, num_h_tile;
>> -		struct drm_tile_group *tg;
>> -
>> -		w = tile->tile_size[0] | tile->tile_size[1] << 8;
>> -		h = tile->tile_size[2] | tile->tile_size[3] << 8;
>> -
>> -		num_v_tile = (tile->topo[0] & 0xf) | (tile->topo[2] & 0x30);
>> -		num_h_tile = (tile->topo[0] >> 4) | ((tile->topo[2] >> 2) & 0x30);
>> -		tile_v_loc = (tile->topo[1] & 0xf) | ((tile->topo[2] & 0x3) << 4);
>> -		tile_h_loc = (tile->topo[1] >> 4) | (((tile->topo[2] >> 2) & 0x3) << 4);
>> -
>> -		connector->has_tile = true;
>> -		if (tile->tile_cap & 0x80)
>> -			connector->tile_is_single_monitor = true;
>> -
>> -		connector->num_h_tile = num_h_tile + 1;
>> -		connector->num_v_tile = num_v_tile + 1;
>> -		connector->tile_h_loc = tile_h_loc;
>> -		connector->tile_v_loc = tile_v_loc;
>> -		connector->tile_h_size = w + 1;
>> -		connector->tile_v_size = h + 1;
>> -
>> -		DRM_DEBUG_KMS("tile cap 0x%x\n", tile->tile_cap);
>> -		DRM_DEBUG_KMS("tile_size %d x %d\n", w + 1, h + 1);
>> -		DRM_DEBUG_KMS("topo num tiles %dx%d, location %dx%d\n",
>> -		       num_h_tile + 1, num_v_tile + 1, tile_h_loc, tile_v_loc);
>> -		DRM_DEBUG_KMS("vend %c%c%c\n", tile->topology_id[0], tile->topology_id[1], tile->topology_id[2]);
>> -
>> -		tg = drm_mode_get_tile_group(connector->dev, tile->topology_id);
>> -		if (!tg) {
>> -			tg = drm_mode_create_tile_group(connector->dev, tile->topology_id);
>> -		}
>> -		if (!tg)
>> -			return -ENOMEM;
>> -
>> -		if (connector->tile_group != tg) {
>> -			/* if we haven't got a pointer,
>> -			   take the reference, drop ref to old tile group */
>> -			if (connector->tile_group) {
>> -				drm_mode_put_tile_group(connector->dev, connector->tile_group);
>> -			}
>> -			connector->tile_group = tg;
>> -		} else
>> -			/* if same tile group, then release the ref we just took. */
>> -			drm_mode_put_tile_group(connector->dev, tg);
>> -	}
>> -		break;
>> +	case DATA_BLOCK_TILED_DISPLAY:
>> +		ret = drm_parse_tiled_block(connector, block);
>> +		if (ret)
>> +			return ret;

break; here.

>>  	default:
>>  		printk("unknown displayid tag %d\n", block->tag);
>>  		break;

-- 
Jani Nikula, Intel Open Source Technology Center


More information about the dri-devel mailing list